QPS Que! Installation Manual - page 5
5
Windows PC Installation
Follow these steps to connect the
Que! USB Floppy Disk
Drive to your Windows
computer and install the driver software (depending on the Windows version
installed in your computer).
1.
Start up your PC.
2.
Plug the USB Floppy Disk Drive cable into a USB port on your computer.
The system automatically detects the drive and displays an Add New
Hardware installation wizard.
3.
Click the Next button.
The system asks if you wish to search for the best driver.
4.
Click the Recommended option, then click the Next button.
The system asks you to specify the location of the driver software.
5. Insert the CD-ROM containing the
USB driver
software into the com-
puter’s CD-ROM drive.
6.
Click to specify the CD-ROM drive (often the D: drive) as the location of
the driver software, then click the Next button.
Windows installs the driver software, informs you that the installation was
successful, and asks if you wish to restart the system.
7.
Click the Yes button to restart your computer.
After the driver is installed, a floppy icon will appear in the My Computer
folder and the Device Manager Control Panel.
Notes (General)
❑
Use only USB hubs that feature an AC power adapter.
❑
Do not strike, drop, or otherwise impact the
Que! USB Floppy
Disk Drive.
❑
The driver software is designed for the Que! USB Floppy Disk Drive and
will not work with other drives.
❑
You can plug the USB cable into a USB port while the power to the computer
is turned on. This is called a “Hot Plug.”
❑
Before you disconnect the cable from the USB port, remove the floppy disk
from the drive.
Note:
❑
If you have
Windows 98SE
, follow the instructions below.
❑
If you have Windows
Me, 2000 or XP, do not install the driver; the drive will be rec-
ognized automatically when you plug its USB cable into a USB port on your computer.
TEAC.USBFloppy(Multicolor) Page 5 Tuesday, January 2, 2001 1:35 PM