QT Big Button Instruction Manual - page 9
8
¾
Voice announcement of caller’s number
1. In on-hook state, press and hold the
TALKING SET button located at the bottom of the
telephone base for 3 seconds, the LCD displays
TALK 1 ON(OFF) and “1” flashes.
2. Press
▲or ▼ key to select the number of repetitions of the announcement. Choose
between 1 to 3.
3. Press
the
TALKING SET button again, “ON”(or “OFF”) flashes.
4. Press
▲ or ▼ key to select either “on” or “off” to activate or deactivate the voice
announcement.
5. Press
the
MENU keyto confirm and exit.
NOTE:
Once the voice announcement has been activated (ON) the caller’s number will be announced
1-3 times depending on the setting that was entered. For the above feature to function, you
must have an active Caller ID subscription with your service provider.
To turn off the voice announcement press and hold the
TALKING SET button for 3 seconds, then
press the
TALKING SET button again, turn the function off using ▲ or ▼ key and press the
MENU keyto confirm and exit.
¾
Voice announcement of pre-dialed number
1. In
on-hook
state, press and hold the
TALKING SET button for 3 seconds, the LCD displays
TALK 1 ON(OFF).
2. Press the
TALKING SET button twice, the LCD displays PDIAL ON(OFF) and “ON”(or
“
OFF”) flashes.
3. Press
▲ or ▼ key to turn the voice announcement of the pre-dialed number ON or OFF.
4. Press
the
MENU keyto confirm and exit.
After this function has been activated the dialed number will be announced when you pre-dial the
number in on-hook state.
NOTE: To deactivate the voice announcement press and hold the TALKING SET button for
3 seconds, then press the
TALKING SET button twice again, deactivate the feature using ▲ or
▼ key and press the MENU keyto confirm and exit.
TRANSFER BETWEEN PARALLELED PHONES
¾
Setting the paging number
1. In on-hook state, press and hold the
MENU key, the LCD displays EL--
2. Key in “*” and the paging number (example “*1”and “*2”), use the
DEL key to edit
3. Press the
MENU key to confirm and exit.
¾
Transferring a call to paralleled phones:
Upon receipt of an incoming call use one of the paralleled phones to answer. Press
“*” and the
paging number that was set in the other telephone to where you want to transfer the call (the