QTX Light DM-X16 User Manual - page 11
Action :
Action :
2)
Press the AUTO DELbutton repeatedly until the
AUTOLED turns on.
1)
Use BANK UP/DOWNbuttons to change Program
banks if necessary.
3)
Adjust the PROGRAM speed via the SPEEDfader
and the loop rate via the FADE TIMEfader.
Notes :
Notes :
Deselect Blackout if LED is lit.
3.3.3 RUNNING A PROGRAM
3.3.3 RUNNING A PROGRAM
Action :
Action :
2)
Use BANK UP/DOWN buttons to change Program
banks if necessary.
1) Press and hold the PROGRAMbutton until the
LED blinks.
3)
Select the desired fixture via the SCANNERSbutton.
Notes :
Notes :
Deselect Blackout if LED is lit.
4)
Adjust and change fixture attributes using the channel
faders and wheel.
6)
Select the desired SCENESbutton to save.
4)
Alternatively you can tap the TAPSYNC DISPLAY
button twice. The time between two taps sets the
time between SCENES (up to 10 minutes).
Also called a Tap-Sync.
3.3.4 CHECK PROGRAM
3.3.4 CHECK PROGRAM
Action :
Action :
2)
Use the BANK UP/DOWNbuttons to select
the PROGRAMbank to review.
1)
Press and hold the PROGRAMbutton until the
LED blinks.
3)
Press the SCENESbuttons to review each
scene individually.
Notes :
Notes :
3.3.5 EDITING A PROGRAM
3.3.5 EDITING A PROGRAM
S
cenes will need to be modified manually.
5)
Press the MIDI/ADDbutton to prepare the save.
Action :
Action :
2)
Use BANK UP/DOWNbuttons to select the
PROGRAMbank you will copy.
1) Press and hold the PROGRAMbutton until the
LED blinks.
3)
Press the MIDI/ADDbutton to prepare the copy.
Notes :
Notes :
All 8 scenes in a Program bank will be copied.
4)
Use BANK UP/DOWNbuttons to select the
destination PROGRAMbank.
3.3.6 COPY A PROGRAM
3.3.6 COPY A PROGRAM
5)
Press the MUSIC BANK COPYbutton to execute
the copy. All LEDs on the controller will blink.
USER MANUAL
10/18
DMX 512 CONTROLLER SERIES