QTX Light DM-X16 User Manual - page 15
3.5.3 DELETE A SCENE
3.5.3 DELETE A SCENE
Action :
Action :
2)
Turn the controller back on.
1) Press and hold the PROGRAM button and the
BANK DOWNbutton while turning off power to
the controller.
Notes :
Notes :
CAUTION!
This process is irreversible. All scenes with data will
be set to 0.
Action :
Action :
2)
Select the BANKthat contains the scene to be
deleted by using the BANK UP/DOWN buttons.
1)
Press and hold the PROGRAMbutton to enter
programming mode.
3)
Press and hold the AUTO DELbutton.
Notes :
Notes :
Action :
Action :
2)
Select the program BANKto run in soundactive
mode using the BANK UP/DOWN buttons.
1) Press the MUSIC BANK COPYbutton until the
MUSIC LED turns on.
Notes :
Notes :
3.6
Playback
3.6
Playback
4)
You can adjust the duration time using the
FADE TIMEfader.
3.5.4 DELETE ALL SCENES
3.5.4 DELETE ALL SCENES
4)
Press the SCENEbutton that corresponds to the
scene you want to delete. All LEDs will blink.
When deleting a scene the physical location is not
removed, however, all 192 DMX channels available
to the scene will be set to value 0.
3.6.1 RUNNING IN SOUND-MODE
3.6.1 RUNNING IN SOUND-MODE
3)
Alternatively you can press a single CHASE button
(1~6) or several CHASEbuttons in sequence and all
selected chases will loop in the order selected.
In the Sound mode, programs will be triggered by the
sound using its built-in microphone.
Multiple chases selected will loop and run in the
order originally selected.
Action :
Action :
2)
If a CHASEbutton is not pressed the controller
will automatically run a BANKprogram.
1) Press the AUTO DELbutton until the AUTO LED
turns on.
Notes :
Notes :
4)
Alternatively you can press a single CHASE button
(1~6) or several CHASEbuttons in sequence and all
selected chases will loop in the order selected.
3.6.2 RUNNING IN AUTO-MODE
3.6.2 RUNNING IN AUTO-MODE
3)
Change BANKprograms by using BANK UP/DOWN
buttons.
In the Auto mode, programs will be triggered by
controllers fade and speed time as set on the faders.
Multiple chases selected will loop and run in the
order originally selected.
5)
You can adjust the time between steps by moving the
SPEEDfader and the duration of the step by moving
the FADE TIME fader.
USER MANUAL
14/18
DMX 512 CONTROLLER SERIES