QTX Light DM-X16 User Manual - page 13
3.4.5 EDIT CHASE (COPY SCENE INTO CHASE)
3.4.5 EDIT CHASE (COPY SCENE INTO CHASE)
Action :
Action :
2)
Press the desired CHASE button.
1) Press and hold the PROGRAMbutton to enter
programming mode.
Notes :
Notes :
I
.e. To insert a scene between Steps 05 and 06
navigate using BANK buttons until the display reads
STEP05.
Action :
Action :
2)
Press the desired CHASEbutton.
1)
Press and hold the PROGRAMbutton to enter
programming mode.
3)
Select the BANKthat contains the scene to be copied
using the BANK UP/DOWN buttons.
Notes :
Notes :
3.4.6 EDIT CHASE (INSERT SCENE INTO A CHASE)
3.4.6 EDIT CHASE (INSERT SCENE INTO A CHASE)
Action :
Action :
2)
Press the desired CHASEbutton that contains
the scene to be deleted.
1) Press and hold the PROGRAMbutton to enter
programming mode.
3)
Press the TAPSYNC DISPLAYbutton to switch the
LED display to steps.
Notes :
Notes :
3.4.7 DELETE A SCENE IN A CHASE
3.4.7 DELETE A SCENE IN A CHASE
5)
Press AUTO DELbutton to delete the step/scene.
All LEDs will blink.
4)
Press the SCENEbutton that corresponds to the
scene to be copied.
5)
Press MIDI/ADDbutton to copy the scene.
All LEDs will blink.
3)
Press the TAPSYNC DISPLAYto switch the LED
display to steps view.
4)
Use the BANK UP/DOWNbuttons to navigate steps
and locate the insert point of the new scene.
The display will read the step number.
5)
Press MIDI/ADDbutton to prepare the insert.
6)
Use the BANK UP/DOWNbutton to locate the SCENE.
7)
Press the SCENEbutton that corresponds to the scene
to be inserted.
8)
Press MIDI/ADDbutton to insert the scene. All LEDs
will blink.
4)
Select the scene/step to be deleted using the
BANK UP/DOWNbuttons.
Action :
Action :
2)
Press the CHASE button (1~6) to be deleted.
1) Press and hold the PROGRAMbutton to enter
programming mode.
3)
Press and hold AUTO DELbutton and the respective
CHASEbutton to delete the chase. All LEDs will blink.
Notes :
Notes :
3.4.8 DELETE A CHASE
3.4.8 DELETE A CHASE
USER MANUAL
12/18
DMX 512 CONTROLLER SERIES