QTX Light DM-X16 User Manual - page 14
3.4.9 DELETE ALL CHASE PROGRAMS
3.4.9 DELETE ALL CHASE PROGRAMS
Action :
Action :
2)
Press the desired CHASE button.
1) Press and hold the PROGRAM button to enter
programming mode.
Notes :
Notes :
I
.e. To insert a scene between Steps 05 and 06
navigate using BANK buttons until the display reads
STEP05.
Action :
Action :
2)
Press and hold the BANK DOWNbutton and the
AUTO DELbutton while turning ON the controller.
1)
Turn OFF controller.
3)
All LEDs will blink.
Notes :
Notes :
3.5 Scene Programming (Steps)
3.5 Scene Programming (Steps)
Action :
Action :
2)
Select the BANKthat contains the scene to be
copied using the BANK UP/DOWN buttons.
1) Press and hold the PROGRAMbutton to enter
programming mode.
3)
Press the SCENEbutton that corresponds
to the scene to be copied.
Notes :
Notes :
3.5.2 COPY A SCENE
3.5.2 COPY A SCENE
5)
Select the destination BANKthat contains the scene
memory to record onto using the BANK UP/DOWN
buttons.
3)
Press the TAPSYNC DISPLAYto switch the LED
display to steps view.
4)
Use the BANK UP/DOWNbuttons to navigate steps
and locate the insert point of the new scene.
The display will read the step number.
5)
Press MIDI/ADDbutton to prepare the insert.
6)
Use the BANK UP/DOWNbutton to locate the SCENE.
7)
Press the SCENEbutton that corresponds to the scene
to be inserted.
8)
Press MIDI/ADDbutton to insert the scene. All LEDs
will blink.
4)
Press MIDI/ADDbutton to copy the scene.
CAUTION! This procedure will result in irrevocable loss of chase step memory. The individual scenes
and program banks will be preserved.
3.5.1 INSERT A SCENE
3.5.1 INSERT A SCENE
6)
Press the desired SCENEbutton to complete copy.
All LEDs will blink.
USER MANUAL
13/18
DMX 512 CONTROLLER SERIES