Quadra-Fire MTVERNINSAE-CSB Owner's manual operation & care - page 15
January 29, 2014
7036-187
15
MT. VERNON AE INSERT
Auto/Manual/Off
User Settings
Fuel Type
MENU
Set Comfort Level
Program
Set Date
Service Info
MENU
Set Day/Time
Figure 15.1
“Setat:”indicationwillchangeto“Holdat:”anddisplaysthe
operating temperature setting.
4.NotificationIcons
Thesystemnotificationareausesiconstoindicateifanac-
tionneedstobetaken.Inbatterymodeitindicatestheap-
proximatechargelevelofthebattery.
5. Function Buttons
Thefunctionbuttonshavetwolabelsabovetheminthedis-
playarea.Theirlabelscanchangedependingonthemenu
screen.Onthemainscreentheleftbuttonwillbringupthe
systemmenuandtherightbuttonhasfunctionalityonlyin
MANUALcycle.
Figure 15.2.
5. Current Temperature
The current temperature area indicates the temperature of
the room where the wall control is located. The temperature
displayedcanbeinunitsofFahrenheitorCelsius.Thede-
siredunitscanbeselectedviathesystemmenu.
See see
page 17.
D. General Information About Using the Wall
Control
Whenabuttonispressedandthescreenchangesfromthe
mainscreentooneoftheotherscreens,thebacklightwillil-
luminatethedisplayarea.Asbuttonsarepressed,theback-
lightcontinuestobeilluminated.
MostscreenshaveaDONEbuttonwhichcanbeusedto
return to the previous screen ultimately returning to the main
screen.
Thewallcontrolwillautomaticallyrevertbacktothestarting
screen if there is no activity for 15 seconds except for the
CONFIRMFUELCHANGEscreen.Themainscreenwillbe
illuminatedforanadditional10secondsandthebacklight
will shut off.
Ifthewallcontrolissubjectedtoastaticshock,thescreen
maygoblank.Ifthishappens,wait25secondsandpress
anybutton.Thiswillresetthescreenrestorefunctionality
andturnonthebacklight.Ifthisdoesnotwork,callyour
dealer.
E. The Main Menu
The menu is the heart of customizing the operation of the
pelletappliancesystemtoyourpersonalliking.Thechoices
onthismenuare:
1. Set Comfort Level (Temperature)
Themostbasicoperationofthewallcontrolistoturnthe
appliance on or off depending on the requirement for heat.
Fromthemainscreen,theSETCOMFORTLEVELscreen
canbeactivatedbypressingtheUPorDOWNbuttononthe
right side of the display area.
Thefirsttimeeitherbuttonispressedthedisplaychangesto
theSETCOMFORTLEVELscreenandshowsthecurrent
settemperature.SubsequentpressesorholdingtheUPor
DOWNbuttonwillchangethesettemperature.
Figure 15.2.
You can override the programming either permanently or
temporarily
. The HOLDTEMP button (lower right) on the
SETCOMFORTLEVELscreenisusedtooverridepreset
programming.
Figure 15.3. BypressingtheHOLDTEMP
button,thecurrentsettemperaturewillpermanentlyoverride
anyprogrammedtemperatureinthe7daysetbackprogram-
ming. This is a convenient way of overriding a program when
your schedule changes temporarily and you don’t want to
reprogramthesetbackfunctionsonthewallcontrol.
Toreleasethepermanentoverride,pressthebuttonlabeled
RESUMEwhenintheHOLDTEMPcycle.Pressingthebut-
ton again will resume the programming at the next program
interval.
Figure 15.4.
To temporarily override the programming, use the UP and
DOWNbuttonsonlyanddonotpresstheHOLDTEMPbut-
ton. The display will show how long the new temperature will
holdbeforeitreturnstothenextscheduledprogramming.
Figure 15.3.
SET COMFORT LEVEL
ON HOLD
RESUME
DONE
74
ºF
Figure 15.3
Figure 15.2
Function Buttons
Buttons
Up
Down
Figure 15.4
2. Auto / Manual / Off Selection
a. Automatic
IntheAUTOMATICcyclethewallcontrolwillturntheap-
pliance on and off automatically and also turns the heat
output level up or down depending on the temperature
setting. The further away the room temperature is from
the set temperature, the higher the heat output.