Quadra-Fire SRV7000-451 User manual - page 6
Page6
7014-101F
April 1, 2009
R
b. Set Date
WhentheSETDATEscreenisenteredthemonthnameis
highlighted.UsetheUP/DOWNbuttonstoselecttheproper
monththenpressthebuttonunder“Set/Next.”
Thehighlightwillmovetothedayofthemonthdisplay.Using
theUP/DOWNbuttons,selectthecurrentdatethenpress
“Set/Next.”Thehighlightwillmovetotheyeardisplay.Select
thecurrentyearandpress“Set/Next”thenthehighlightwill
bebackonthemonthnamedisplay.
September
2007
September
2007
28
September
2007
28
Figure 6.1
Figure 6.2
Figure 6.3
6. User Settings
ItemsthatarerarelychangedarestoredundertheUSER
SETTINGS.
a. Temp Units F/C
TheTEMPUNITSscreenisusedtochangefromFahren-
heittoCelsiusandbackforthetemperaturesdisplayed.
b. Flame Height Adjust
The FLAME HEIGHTADJUST screen is used to adjust the
flame height (fuel feed rate) for specific installation and fuel
type.Thedealerwillusuallyadjustthisifnecessaryoninstal-
lationandcanadviseonspecificsettingsforaparticularap-
plication.
Figure 6.4
Figure 6.5
Figure 6.6
USER SETTINGS
Temp Units F/C
Flame Height Adjust
Temp Differential
USER SETTINGS
Temp Cal
Properties
Elevations
Conv Blower Speed