Quadra-Fire SRV7000-451 User manual - page 9
R
April 1, 2009
7014-101F
Page
READY
71
Set at: 74
12:30 PM
HEAT OUTPUT
MENU
Hold at:
Medium High
1. At the starting screen, press “HEAT
OUTPUT”.
2. Usethe“UP”buttontochange“HEAT
OUTPUTLEVEL”to”MEDIUM-HIGH”.
SETTING HEAT OUTPUT
1. Pressandhold“UP”or“DOWN”but-
tontosetdesiredtemperature.
74
ºF
2. Press“HOLDTEMP”.
SETTING COMFORT LEVEL
READY
71
Set at: 68
12:30 PM
HEAT OUTPUT
MENU
NOTE:
Set temperature must be 3
degrees higher than room
temperature for appliance to
start.
SET COMFORT LEVEL
ON HOLD
RESUME
DONE
74
ºF
3. Press“DONE”.
3. Press“DONE”twiceorwait15seconds
forstartingscreentore-appear.
E. Quick Start Guide (Cont’d)
HOPPER OUT OF FUEL
SHUTDOWN
71
Set at: 74
12:30 PM
HEAT OUTPUT
MENU
Hold at:
STARTUP
71
Set at: 74
12:30 PM
HEAT OUTPUT
MENU
Hold at:
Min Firepot Temp
SERVICE
RETRY
ERROR LIST
1. Iftheappliancehasstoppedoperat-
ing,checkthewallcontrolscreen.If
itisshowing“MinFirepotTemp”the
hopperhasrunoutoffuel.
2. Fill the hopper with fuel and press
the“RETRY”buttontwice.Thefirst
timeturnsonthebacklight,thesec-
ondtimestartstheretryfunction.
3. Ifthewallcontrolscreenchangesto
a“SHUTDOWN”screenthatmeans
yourappliancehasnotcompletedthe
full shutdown cycle. Depending on
whereitwasinthecycleitcantake
fromonetotenminutestorestart.
Whentheshutdowncycleiscomplete
the wall control screen will display
“STARTUP”.ContinuetoStep4.
4. Ifthewallcontrolscreenchangesto
a“STARTUP”screenafterpressing
“RETRY”thatmeansyourappliance
hasalreadycompletedtheshutdown
cycle. You must wait until the wall
control screen displays the startup
screenandthenput1/2cupofpel-
letsinthefirepotforaquickrestart.
5. Besurethehopperlidandglassdoor
arebothclosed.