Quality Craft QCM995P-47ACH Instruction Manual - page 9
9
OPERATION BY
THE CONTROL PANEL
The controls are located behind the grill below
the front glass and can be accessed by pulling
the grill from the top, forward and down.
ON/OFF: Press this button for main power
and flame effect. The indicator light will turn
on. See below for other control switches.
750W: For low heat function - Press this
switch while the ON/OFF switch is in the on
position for low heat. The indicator light will
turn on.
1500W: For high heat function - Press this
switch while the ON/OFF switch and the
750W switch are in the on position for high
heat. The indicator light will turn on.
Heat Thermostat Control Knob: To adjust the
temperature to your individual requirements.
Turn the thermostat dial to the right (clock-
wise) to increase the desired temperature
and to the left for lower temperature. This
thermostat control dial can only be used
while the ON/OFF switch and 750W/1500W
switches are in the on position.
Dimmer Control Knob: Turn the dimmer dial
clockwise or counter clockwise to get the
desired flame intensity. The dimmer switch
can only be used when the ON/OFF switch is
in the on position.
Note: When the ON/OFF switch is turned
off, all other heater functions will stop even
though the switches may be in the on
position.
MAINTENANCE WARNING:
Disconnect power and unplug the power
cord before attempting any maintenance or
cleaning to reduce the risk of fire, electric
shock or damage to persons. The bulbs in
your unit can become extremely hot. Allow
at least 10 minutes between turning off the
unit and removing the light bulbs to avoid the
accidental burning of the skin.
RISK OF FIRE:
Do not exceed the
recommended bulb wattage.
O P E R A T I O N