Summary of TG-UV2PLUS
Page 1
User’s manual.
Page 2
Thank you for purchasing this qs radio. We believe this easy-to-use radio will provide reliable and dependable communication. Qs radio incorporates the latest advanced technology. As a result, we know that you will be pleased with the quality and features of this product..
Page 3
1.Multiband tx&rx,dual display dual standby 2.H (high) , m (medium) , l (low) output power selective 3.Double frequency, double channel display of the lcd. 4.Built-in vox function 5.Dual-watch operation 6.Respectively receive/transmit ctcss/dcs code 7.Repeater shift direction set 8.Auto code search ...
Page 4
Supplied accessories----------------------- 1 charging notes(1)(2)----------------------- 2-3 attaching/releasing the battery pack------- -------------------------4 installing belt clip---------------------------- 5 installing external speaker/microphone--------------------------5 diagram-----------...
Page 5
2 3 charging notes(1) charging the battery pack: cautions after the battery is charged to its highest capacity, and then used on the radio. If the radio still shows low power, please change a new battery pack. Do not short-circuit the battery terminals or throw the battery into fire. Never attempt t...
Page 6
4 5 slide the battery pack into the back of the radio in the direction of the arrow ( ), then lock it with the battery release button. Slide the battery pack until the battery release button makes a clicking sound. " " turn off the radio before releasing the battery pack. Push the battery release bu...
Page 7
6 7 diagram antenna connector lcd display keypad jacklight power/volume switch receive/transmit indicator lamp speaker microphone function key up key down key ptt switch monitor jacklight switch ear/mic jacks battery pack.
Page 8
8 9 p-1 p-2 p-3 dual watch operation priority scan dcs ctcss transmit indicator function key signal tx/rc signal indicator vox transmit function priority scan channel repeater shift direction reverse function u-u, v-v, u-v mode keypad sound h / m / l p o w e r frequency display scan function battery...
Page 9
10 f+1 1 3 4 5 6 7 h/m/l f+2 rc. *** f+3 tc. *** f+4 + - f+5 vox. * f+6 rc. *** f+7 r p14 p14 -15 p15 -16 p16 p16 -17 p17 p18 2 11 8 9 10 11 13 14 15 f+8 scr. ** mr/ vfo f+9 dw f+0+1 stp. *** mr/ vfo f+0+2 0.000 00 mr/ vfo f+0+3 bcl. ** mr/ vfo 12 f+0+4 tot. ** mr/ vfo f+0+5 dsp. ** mr/ vfo f+0+6 pc...
Page 10
12 13 no. Feature fast key lcd display parameter selectable confirm vfo mode page 16 f+0+7 w/n * f or ptt mr/ vfo f+0+8 del h * f or ptt f+0+9 reset f or ptt f+ s ptt f+ s ptt f+main f+ptt tx 1750 f+led f + l e d wx 17 18 19 20 21 22 23 f+mon sql. * mr/ vfo 24 p22 p22 -23 p23 p24 p24 p25 p23 p23 -24...
Page 11
14 15 1. On standby mode, press + , the lcd will displays "rc.***"( as picture 2) 2. Press to change ctcss/dcs, press off to turn it off. Ctcss: 67.0-254.1 dcs: n023-n754 ( normal dcs) dcs: i023-i754 ( inverse dcs) 3. Press or to choose the code. 4. After setting, press to confirm, then it will auto...
Page 12
16 17 1. On standby mode, press + to enter, the lcd displays as picture 5. 2. Press or to choose vox level, which has levels (off~9), off. (1) is the lowest level, (9) is the highest level. 3. After setting is finished,press to confirm, then the system will automatically return to standby mode. ( lc...
Page 13
1. On standby mode, press + + to enter, the lcd displays "stp.**". 2. Press or to choose. There are 5/6.25/10/12.5/15/20/25/30/50/100khz to choose. 3. After setting, press to confirm. Press or ptt to return to standby mode. 18 19 1. On standby mode, press + to enter, the lcd displays "r". (as pictur...
Page 14
1. On standby mode, press + + to enter, the lcd shows "tot.***". 2. Press or to choose time-limit level. The tot of this radio may set 60- 540seconds, and has 1-9 grades, level 1 is 60 seconds, level 2 is 120 seconds, infer from this. Off is turning off. 3. After setting, press to confirm. Press or ...
Page 15
3. After setting, press to confirm, it would remind you whether you would delete. Lcd displays "del?" 4. If you want to delete, press to confirm again. 1. On standby mode, press + + to enter, the lcd displays "w/n.*". 2. Press or to choose w(wide 25k) or n( narrow 12.5k). After setting, press to con...
Page 16
24 25 using this function may shift between main and sub channels when in frequency or channel mode. On standby mode, press + , the frequency or channel will shift the top or bottom row. But the "↓"of the upper row main channel will not shift, the frequency/channel that "↓"shows is still the main ch...
Page 17
Press key each time, the "↓"symbol will display in turn between the main frequency/channel and sub- frequency/channel. Next you can change the frequency or data such as frequency、 channel number、output power、 ctcss/dcs code and so on. Example: channel 3 (same frequency). Receiving frequency: 466.675...
Page 18
Using this function can choose the channel you setting is to scan or not. 1. On the channel mode, press key + , the lcd displays "s", it means the channel accept scan. 2. Press key + again to exit, the lcd will not displays"s", it means the channel you choose is not in scanning. 28 29 frequency band...
Page 19
30 31 ctcss 1 2 3 4 5 6 7 8 9 10 11 1 2 1 3 1 4 1 5 1 6 1 7 1 8 1 9 2 0 2 1 2 2 2 3 2 4 2 5 2 6 2 7 2 8 2 9 3 0 3 1 3 2 3 3 3 4 3 5 3 6 3 7 3 8 3 9 4 0 4 1 4 2 4 3 4 4 4 5 4 6 4 7 4 8 4 9 5 0 6 7 . 0 6 9 . 3 7 1 . 9 7 4 . 4 7 7 . 0 7 9 . 7 8 2 . 5 8 5 . 4 8 8 . 5 9 1 . 5 9 4 . 8 9 7 . 4 1 0 0 .0 1 0...
Page 20
32 rx:136-174mhz，400- 0 m hz general frequency sensitivity rated voltage memory channel antenna disposition antenna impedance working manner 5ppm dc7.2v (rechargeable li-ion battery) frequency range specifications 110mmx56mmx37mm -122db(12db sinad) ≥60db ≥55db ≥65db ≥60db 0.5w ≥85db ≥65db 200 channe...