QUAN SHENG TG-UV2PLUS User Manual - page 18
Using this function can choose the channel you setting is to scan or not.
1. On the channel mode, press key + , the LCD displays "S", it means the
channel accept scan.
2. Press key + again to exit, the LCD will not displays"S", it means the channel
you choose is not in scanning.
28
29
Frequency Band Shift-----Menu 30
This function is convenient to choose the frequency band of the radio.
1. On the frequency mode,press key each time to choose the frequency band. The
LCD displays "F*".
BAND
Scan list-----Menu 31
F
MR/
VFO
F
MR/
VFO
NOTICE
For scan function see Menu 15、19、20.
Jacklight-----Menu 32
Press key , the jacklight turn on; operate it again, the jacklight turn off.
FM Radio-----Menu 33
On the frequency mode, input the FM frequency of the radio, the FM frequency range:
88-108MHz.Example: FM frequency: 88.1MHz
1. On the frequency mode . (as picture 24).
2. Input number key 0、8、8、1、0、0 directly. (as picture 25).
H
F0
00.000
00
08
440.025
00
H
F0
88. 00
00
08
440.025
00
Picture 24
Picture25
NOTICE
The FM frequency also can be stored in the channel.
PC Programmable
The radio can be programmed by computer. For operation details see QS PC software.
The Annunciation Of No Transmitting
1. If busy channel lock, LCD displays "BUSY".
2. If PLL unlock, LCD displays "LOST".
3. If the battery voltage is lower than normal, LCD displays "LOW".
4. If Time-Out-Timer, LCD displays "OVER".
5. If it is in the frequency: 470-519.995MHZ, LCD displays "DIS".