QUAN SHENG TG-UV2PLUS User Manual - page 11
14
15
1. On standby mode, press + , the LCD will displays "RC.***"( as picture 2)
2. Press to change CTCSS/DCS, press OFF to turn it off.
CTCSS: 67.0-254.1
DCS: N023-N754 ( Normal DCS)
DCS: I023-I754 ( Inverse DCS)
3. Press or to choose the code.
4. After setting, press to confirm, then it will automatically turn back to the
standby mode.
NOTICE
FUNCTION INSTRUCTION
1
POW
F
Picture1
M
06
440.025
00
M
01
46.025
00
H
This model has double-frequency-display function. On frequency mode, it can show two
different receiving and transmitting frequencies at the same time; on channel mode, it
can display two different channels and their related parameters at the same time.
On frequency or channel mode, press"MAIN"to shift between main channel and sub
channel. If"↓"points to main channel, then all of the operations are processed with main
channel frequency or channel; if"↓"points to sub channel,then all of the operations are
processed with sub channel frequency or channel.
Transmitting Output Power Choose (H/M L)-----Menu 1
Using this function may choose the transmitting output power.
1. On frequency mode, press and , the LCD will displays as picture 1.
3. When setting is finished, it would be back to standby state automatically.
2. Operating it repeatedly may shift between (H) 5W, (M) 2.5W, (L) 1W.
NOTICE
2
RX.T
BAND
MR/
VFO
F
RC.off
M
01
46.025
00
H
Picture 2
NOTICE
There are 50 groups DCS and 208 Normal/inverse DCS. See the attached list (P30-P31).
On each channel, CTCSS/DCS may be used and set together.
Transmitting CTCSS/DCS Setting (TX) -----Menu 3.
1. On standby mode, press + , the LCD displays"TC.***" (as picture 3).
F
3
TX.T
Using the function may set your personal private and prevents disturbance from
others or matching with the code of other radios.
MR/
VFO
2. Press to shift between CTCSS/DCS (see Menu 2).
3. Press or to select.
4. After setting, press to confirm, and then it would automatically return to
standby mode.
BAND
tC.off
M
01
46.025
00
H
Picture
3
NOTICE
There are 50 groups CTCSS and 208 Normal/inverse DCS. See attached list (P30-31).
On each channel, CTCSS/DCS may be used together.
On channel mode, the output power may be changed directly. But changing channels or
turn the power on, it will make it back to the initial setting.
Choosing high power may improve the calling quality; low power may lower the radiation
and usage of battery.
Receiving CTCSS/DCS Setting (RC)-----Menu 2
Using the function may set your personal private and prevents disturbance from others
or matching with the code of other radios.