Quanmax KUBE-8110 User Manual - Replacing The Chassis Cover
Manual is about: Fanless Box PC
of
66
2-4 KUBE-8110 User’s Guide
Figure 2-1. KUBE-8110 Chassis Cover screw locations
2) Carefully pry the chassis cover up and off of the chassis base. Use a non-metallic tool or Phillips
screwdriver tip wrapped in cloth if you have difficulty. Be careful not to damage the thermal pads on
the underside of the lid.
Figure 2-2. KUBE-8110 - Removing the Chassis Cover
X
Replacing the Chassis Cover
To replace the chassis cover, carefully align it with the chassis, making sure not to damage the thermal
pads. Ensure that all wires are correctly routed to avoid damaging them. Replace and tighten the 6 long
screws to secure the chassis cover. Replace and tighten the 4 screws on the front and rear panels.