Quanmax KUBE-8110 User Manual - Removing A So-Dimm:

Memory Module Installation        2-7

KUBE-8110 User’s Guide

4) Fully insert the module into the socket until a “click” is heard. .

Figure 2-5. Fully insert the SO-DIMM Memory Module into the onboard socket

5) Press down on the SO-DIMM so that the tabs of the socket lock on both sides of the module..

Figure 2-6. Press down on the SO-DIMM Memory Module to lock it in place

X

Removing a SO-DIMM:

To remove the SO-DIMM, use your fingers or a small screwdriver to carefully push away the tabs that secure 

either side of the SO-DIMM.  Lift it out of the socket.

Make sure you store the SO-DIMM in an anti-static bag. The socket must be populated with memory 

modules of the same size and manufacturer.