Quanmax KUBE-8110 User Manual - Jumper Settings
Internal Connectors and Jumpers 5-7
KUBE-8110 User’s Guide
X
Jumper Settings
To ensure correct system configuration, the following section describes how to set the jumpers to enable/
disable or change functions. For jumper descriptions, please refer to the table below.
Jumper
Function
JP1
LCD Voltage Selector
JP3
Clear CMOS Jumper
JP4-6
COM2 Mode Setting
Table 5-9. Jumper Descriptions
X
LCD Voltage Selection (JP1: 3-pin 2.54mm pitch header):
Function
JP1
+5V 1-2
Short
+3.3V (Default)
2-3 Short
Table 5-10. LCD Voltage Selection
X
Clear CMOS Setting (JP3: 2-pin 2.54mm pitch header):
Function
JP2
Normal (Default)
Open
Clear CMOS
Short
1
2
Table 5-11. Clear CMOS Setting
X
COM2 Mode Setting (JP4-6: 3-pin 2.54mm pitch header):
Function
JP4
JP5
JP6
RS-232 (Default)
1-2 Short
1-2 Short
1-2 Short
RS-422
2-3
Short 2-3
Short 1-2
Short
RS-485
2-3
Short 1-2
Short 2-3
Short
Table 5-12. COM2 Mode Setting