Quanmax KUBE-8110 User Manual - Memory Module Installation

2-6        KUBE-8110 User’s Guide

X

Memory Module Installation

DDR2 SO-DIMMs have 200-pins and one notch that will match with the onboard SO-DIMM socket. Make 

sure that your module is the correct specification for your board.

The KUBE-8110 has a dual SO-DIMM socket. You may populate the upper, lower, or both sockets.

X

Installing a SO-DIMM

X Carefully follow the steps below in order to install the SO-DIMMs:

1) To avoid generating static electricity and damaging the SO-DIMM, ground yourself by touching a 

grounded metal surface or use a ground strap before you touch the SO-DIMM.

2) Do not touch the connectors of the SO-DIMM. Dirt or other residue may cause a malfunction.

3) Hold the SO-DIMM with its notch aligned with the memory socket of the KUBE-8110 and insert it at 

a 30-degree angle into the socket. .

Figure 2-4. Align the SO-DIMM Memory Module with the onboard socket