QUATTRO EMS GM380E Operation Manual - page 10
TECHNICAL SPECIFICATIONS
Channel:
Four, isolated between channels
Pulse amplitude:
Adjustable 0-100mA peak into 500
Ω
load each
channel, constant current
Pulse Rate:
1Hz-160Hz (adjustable), 1Hz/step
Pulse Width:
300µs fixed.
Software ramp up feature: Pulse width ramp up when change mode
Patient Compliance
counter:
Shows the treatment times. Account by hours.
Patient Lock System:
To prevent the user from changing any fixed
parameters set by the physician.
Timer: 5,10,15,20,30,45,60
minutes or Continue selectable
LCD:
Shows modes, pulse rate, pulse width, timer,
CH1/CH2 of each unit.
ON Ramp:
Adjustable 1-8 seconds. 1sec/step.
Cycle ON Time:
Adjustable 1-30 seconds. 1 sec/step.
Cycle OFF Time:
Adjustable 1-30 seconds. 1 sec/step.
Function Modes:
S: Synchronous.
C: Constant.
A: Alternation.
Wave Form: Asymmetrical Bi-Phasic square pulse.
Max charge per pulse: 30 micro-coulombs maximum
Voltage: 0-110 Volt (Open Circuit).
Power Source: 6 pieces of 1.5V UM-3/AA size batteries or 9-Volt adaptor
Dimension:
287 x 224 x 79 mm
Weight:
Approx. 1250g (without batteries)
All electrical specifications are ±10% 500
Ω
load.
-
8
-