Quick mill achille 1 mod. 0996 achille instructions.
Quick mill achille 2 quick mill thanks you for having purchased one of our products. Before using the machine we suggest you carefully read this manual to obtain the necessary information for correct use and servicing of the product. Keep this instruction manual in a safe place. For any information ...
Quick mill achille 3 3 – machine description 1. Machine on/off switch 2. Group lever 3. Hot water dispenser 4. Dispensing group 5. Filter holder 6. Steam nozzle 7. Steam valve 8. Hot water valve 9. Red heating indicator light (heating element on) 10. Green indicator light (machine on) 11. Boiler wat...
Quick mill achille 4 5. Connection to the main power network - the connection to the main power network must be done by qualified personnel. - the system must be installed in conformity with the current laws and it must be grounded. The machine comes with a power cord with plug; the ends of the cord...
Quick mill achille 5 6.4 steam dispensing 1. To avoid liquid backwashing into the boiler, discharge the steam using the valve knob. 2. Put the steam nozzle into the container of liquid to be heated. 3. Turn the steam valve knob. The amount of steam dispensed is proportional to the opening of the val...
Quick mill achille 6 8. Decommissioning machine 8.1 temporarily -clean the coffee group, the screen and the gasket. -empty the water tank and the drip tray and wash them, or shut off water supply. -turn off the main switch and remove the plug from the wall. -do the daily maintenance operations. Stor...
Quick mill achille 7 the dispensed coffee is too cold possible causes: 1- the cups are cold. 2- the portafilter or the group is cold. 3- the coffee grind is too fine. 4- the machine’s hydraulic circuit is dirty (lime scale). 5- the boiler pressure is below 0.8 bar in case 1 use hot cups. In case 2 k...
