Quick MILL Achille 0996 Instruction Manual - page 2
Quick Mill
Achille
2
QUICK MILL thanks you for having purchased one of our products. Before using the machine we suggest you
carefully read this manual to obtain the necessary information for correct use and servicing of the product.
Keep this instruction manual in a safe place. For any information or problems not comprehensively dealt with,
contact qualified personnel.
1. SYMBOLS
The warning triangle identifies all explanations of importance for human safety.
Follow these indications to prevent accidents!
The numerical symbol, numbers or letters indicates references to illustrations and parts of the
machine like keys, luminous indicators, etc.
The manufacturer assumes no responsibility for possible damage/injury in case of:
• Uses not in conformity with the intended purposes;
• Alteration to the power cord;
• Alteration to any machine part;
• Use of non-original components or accessories;
• Repairs made at unauthorized service centers;
This product complies with the label requirements established in the WEEE Directive
(2002/96/EC). The affixed symbol indicates that this electrical or electronic product
should not be thrown in a container for household waste. PRODUCT CATEGORY with
references to the types of appliances listed in Annex 1 of the WEEE Directive; this
product falls into category 2 “Small household appliances”.
DO NOT THROW INTO A CONTAINER FOR HOUSEHOLD WASTE.
Lack of compliance with the above points render the warranty invalid.
2.
WARNINGS
Do not leave packaging items (plastic bags, expanded polystyrene, nails, cardboard boxes, etc.) within the reach of
children as they are potentially hazardous.
Store the packed machine in a place that is dry, moisture free, and sheltered from inclement weather. Storeroom
temperature should not be below 41°F (5°C).
Do not set heavy packages on top of the machine.
Before connecting the machine make sure that the electrical rating complies with that of the power distribution
circuit.
The power cord should be completely extended (do not roll up or overlap) and positioned where it is not exposed
to bumps or minor tampering; do not place near water or other liquids or near heat sources; make sure it is not
damaged (otherwise have it replaced by qualified personnel).
The use of adapters, multiple outlets and/or extension cords is not recommended.
In case of doubt or uncertainty, have the power supply system checked by qualified personnel; it must comply
with the requirements set out by the current safety standards, including: effective grounding, cross section of
conductors sufficient for the absorption power; efficient cut-out device.
Place the machine on a water-resistant surface (laminate, steel, ceramic, etc.) away from heat sources (ovens,
burners, fireplaces or chimneys, etc.) and in locations where the temperature does not go below 5°C. G
Do not expose the machine to inclement weather or install it in rooms with high humidity like bathrooms.
If you have to replace parts, contact a dealer or authorized reseller and only use original spare parts.
The manufacturer cannot be held responsible for any damage/injuries to objects or persons caused by
incorrect installation or use.