Quick Track OMNI User Manual - Step 8
7
Getting Started Continued
Step 8
After pairing all of your collars touch “Hunt Locations”
Step 9
Touch “Add Hunt Location”
Step 10
IMPORTANT NOTE:
Stream Map is used for getting familiar with OMNI system.
Preload Map should be used for an actual hunt and must be
downloaded while on WI-FI prior to the hunt. When selecting preload
map make sure hunt location address or GPS coordinates is near the
center of the hunt location. Downloading a map will take anywhere
from 15 minutes to 1 hour depending on the speed of your WI-FI.
The Pre-Hunt screen will appear. Name the location, enter address or
select use current location, select map style, and choose stream map or
preload map and touch “Start Hunt”
Step 11
While outdoors power on paired collars and wait for receiver and collars
to acquire a satellite signal.
Step 12
Verify both collars and receiver have acquired satellites by having a
blinking green light, and dog icon pulses approximately every 10
seconds on the map.
Step 13
You are now ready to hunt if you have completed steps 1 through 12
and have downloaded a hunt area map on WI-FI.