Quickie puma 20 Technical Manual - page 121
| 121
Puma 20/40
| 121
5.3
5.3.13 Replacing the tube and/or tyre of a drive wheel, Puma 40 / 5-spoke wheels > October 2016
Preparation
• Switch off the wheelchair via the remote control.
• Be sure that the freewheel switch is in ‘drive’ mode. If the
freewheel switch is in ‘push’ mode this will make loosening the
bolts impossible.
• Use a lifting device to raise the drive wheels clear of the ground.
Instructions
• Remove the wheel from the axle. (See instruction: Replacing the
drive wheel, indoor/outdoor)
•
Deflate the tyre (not necessary for replacing the complete drive
wheel!).
• Loosen all Allen bolts and remove the front of the rim half.
•
Remove the tyre and the tube, replace a new tube and/or tyre.
•
Replace the tyre and tube on the rim half.
• Mount the front of the rim half.
• Replace the drive wheel on the axle.
•
Inflate the tube to the correct pressure. (See: ‘Technical
specifications’)
Notice
Inflate the tube to the correct pressure! (See ‘Technical specifications’)
Relevant article numbers
Puma 40 5 spokes
9011644 Nuts&Bolts Drive Wheel 5-Spoke
9011588 Drive wheel mounting set, Puma 40 / 5-spoke wheels,
version > October 2016
9011634 Drive wheel indoor 12 1/2 x 2 1/4 (13"), air, excl hub
9011635 Drive wheel indoor 12 1/2 x 2 1/4 (13"), punctureproof, excl
hub
9011636 Drive wheel outdoor 3.00-8, grey air (14"), excl hub
9011637 Drive wheel outdoor 3.00-8, grey punctureproof (14"), excl
hub
9011638 Drive wheel outdoor 3.00-8, grey air (14"), All Weather, excl
hub
9011639 Drive wheel outdoor 3.00-8 , black air (14"), excl hub
9011640 Drive wheel outdoor 3.00-8 , black punctureproof (14"), excl
hub
9007193 Wheelcover grey
9011632 P40 hub outdoor Service, version > October 2016
9011633 P40 hub indoor Service, version > October 2016
9011644 Nuts&Bolts Drive Wheel 5-Spoke
9011589 Drive wheel indoor 12 1/2 x 2 1/4 (13"), air, version >
October 2016
9011590 Wheel Set indoor 12 1/2 x 2 1/4 (13") Air, version > October
2016
9011591 Drive wheel indoor 12 1/2 x 2 1/4 (13") PU, version >
October 2016
9011592 Wheel Set indoor 12 1/2 x 2 1/4 (13") PU, version >
October 2016
9011593 Drive wheel outdoor 3.00-8, grey air (14"), version >
October 2016
9011594 Wheel Set outdoor 3.00-8, grey air (14"), version > October
2016
9011595 Drive wheel outdoor 3.00-8 (14"), grey PU, version >
October 2016
9011596 Wheel Set outdoor 3.00-8 (14"), grey PU, version > October
2016
9011597 Drive wheel outdoor 3.00-8(14")grey air Trell, version >
October 2016
9011598 Drive wheel outdoor 3.00-8 , black air (14"), version >
October 2016
9011599 Wheel Set outdoor 3.00-8 , black air (14"), version >
October 2016
9011600 Drive wheel outdoor 3.00-8 (14"), black PU, version >
October 2016
9011601 Wheel Set outdoor 3.00-8 (14"), black PU, version >
October 2016
1015116 Inner tube 2.80/2.50x4 (9")
1015107 Outer tyre 2.80/2.50x4 (9") grey line profile
1015115 Inner tube 3.00-4 (10")
1015105 Outer tyre 3.00-4 (10") grey highway profile
1015106 Outer tyre 3.00-4 (10") black highway profile
1015118 Inner tube 12 1/2 x 2 1/4 (13")
1015112 Outer tyre 12 1/2 x 2 1/4 (13") grey block profile
1015113 Outer tyre 12 1/2 x 2 1/4 (13") black block profile
1015117 Inner tube 3.00-8 (14")
1015111 Outer tyre 3.00-8 (14") grey block profile
1015110 Outer tyre 3.00-8 (14") black block profile
Tools used
• Lifting device
• Screwdriver
• Hammer (plastic)
•
Torque wrench, socket, 8 mm
•
Allen key, 6 mm
Icons
Parts need to be replaced. Dispose of waste parts in
accordance with local regulations
Bolts are provided with Loctite thread locker!
Note!
Be aware of the issue!
1
min.
100 cm
min.
100 cm
min.
75 cm
min.
75 cm
110648-03-001
Note!
Suitable work area required!
2