Quickie puma 20 Technical Manual - page 161
| 161
Puma 20/40
| 161
5.3.30 Adjusting the centre point of gravity, all Puma-versions
Preparation
Switch off the wheelchair via the remote control.
Instructions
• Remove the leg rests.
• Loosen the 4 bolts.
• Move the whole chair unit to the correct position.
• Remount the 4 bolts.
• Replace the leg rests.
Notice
Changing the wheelchair’s centre of gravity may negatively
influence the wheelchair's driving characteristics and/or its
dynamic stability! Therefore it might be sensible to use the
RWD hole for a FWD and vice versa
Relevant article numbers
9002592 M8x12 CKS BZK PRECOTE 85
00000.2003 Locking ring, flat M8
Tools used
Allen key, 6 mm
Icons
Parts need to be replaced. Dispose of waste parts
in accordance with local regulations.
Note!
Be aware of the issue!
1
min.
100 cm
min.
100 cm
min.
75 cm
min.
75 cm
110648-03-001
Note!
Suitable work area required!
2
110648-03-902
2
2
1
3
max. 30 cm
110648-03-007_FWD_5spaak_2016
Note!
Lift the chair in case the wheel chair has an electrical lift.
4