Quidway S5012G Operation Manual

Other manuals for S5012G: Installation Manual
Manual is about: S5000 Series Ethernet Switches

Summary of S5012G

  • Page 1

    Operation manual - port quidway s5000 series ethernet switches table of contents i table of contents chapter 1 ethernet port configuration ....................................................................................... 1-1 1.1 ethernet port overview..............................................

  • Page 2

    Operation manual - port quidway s5000 series ethernet switches chapter 1 ethernet port configuration 1-1 chapter 1 ethernet port configuration 1.1 ethernet port overview s5012g ethernet switch provides 12 10/100/1000base-t ethernet ports and four combo gbic ports for which you can select the specifi...

  • Page 3

    Operation manual - port quidway s5000 series ethernet switches chapter 1 ethernet port configuration 1-2 z set ethernet port suppression ratio z set link type for ethernet port z add the ethernet port to specified vlans z set the default vlan id for the ethernet port z set the time interval of calcu...

  • Page 4

    Operation manual - port quidway s5000 series ethernet switches chapter 1 ethernet port configuration 1-3 table 1-3 set description character string for ethernet port operation command set description character string for ethernet port. Description text delete the description character string of ethe...

  • Page 5

    Operation manual - port quidway s5000 series ethernet switches chapter 1 ethernet port configuration 1-4 note that, 10/100/1000base-t port and combo gbic port can operate at 10mbps, 100mbps or 1000mbps as per different requirements. But if the port is in half duplex, it cannot operate at 1000mbps. T...

  • Page 6

    Operation manual - port quidway s5000 series ethernet switches chapter 1 ethernet port configuration 1-5 1.2.8 set ethernet port suppression ratio you can use the following commands to restrict the broadcast/multicast/unicast traffic. Once the broadcast/multicast/unicast traffic exceeds the value se...

  • Page 7

    Operation manual - port quidway s5000 series ethernet switches chapter 1 ethernet port configuration 1-6 operation command restore the default link type, that is, the access port. Undo port link-type you can configure three types of ports concurrently on the same switch, but you cannot switch betwee...

  • Page 8

    Operation manual - port quidway s5000 series ethernet switches chapter 1 ethernet port configuration 1-7 of the packet is identical to the default vlan id of the port, the system will remove vlan tag before sending this packet. Perform the following configuration in ethernet port view. Table 1-11 se...

  • Page 10

    Operation manual - port quidway s5000 series ethernet switches chapter 1 ethernet port configuration 1-9 [quidway-gigabitethernet0/1] port trunk permit vlan 2 6 to 50 100 # create the vlan 100. [quidway] vlan 100 # configure the default vlan id of gigabitethernet0/1 as 100. [quidway-gigabitethernet0...

  • Page 11

    Operation manual - port quidway s5000 series ethernet switches chapter 2 link aggregation configuration 2-1 chapter 2 link aggregation configuration 2.1 link aggregation overview the link aggregation means aggregating several ports together to implement the outgoing/incoming payload balance among th...

  • Page 12

    Operation manual - port quidway s5000 series ethernet switches chapter 2 link aggregation configuration 2-2 2.3 display and debug link aggregation after the above configuration, execute display command in any view to display the running of the link aggregation configuration, and to verify the effect...

  • Page 13

    Operation manual - port quidway s5000 series ethernet switches chapter 2 link aggregation configuration 2-3 # aggregate gigabitethernet0/1 through gigabitethernet0/3. [quidway] link-aggregation gigabitethernet0/1 to gigabitethernet0/3 both # display the information of the link aggregation. [quidway]...