Quidway S5012G Operation Manual - page 10
Other manuals for S5012G:
Installation Manual
Manual is about: S5000 Series Ethernet Switches
of
13
Operation Manual - Port
Quidway S5000 Series Ethernet Switches
Chapter 1 Ethernet Port Configuration
1-9
[Quidway-GigabitEthernet0/1] port trunk permit vlan 2 6 to 50 100
# Create the VLAN 100.
[Quidway] vlan 100
# Configure the default VLAN ID of GigabitEthernet0/1 as 100.
[Quidway-GigabitEthernet0/1] port trunk pvid vlan 100
1.5 Ethernet Port Troubleshooting
Fault: Default VLAN ID configuration failed.
Troubleshooting: Take the following steps.
z
Execute the display interface or display port command to check if the port is a
trunk port or a hybrid port. If it is neither of them, configure it as a trunk port or a
hybrid port.
z
Then configure the default VLAN ID.