R.P.S. Corporation MAGNUM series Operator's Manual - Page 11
PAGE 11
***
FOR CORRECT PAD APPLICATION , CALL YOUR LOCAL DEALER***
1. Turn on machine power.
2. Raise the scrub deck by depressing the brush
switch (O) to the up and off position and turn
machine power back off.
3. The machine is equipped with jaws. Remove
pin
"A"
and undo latch
"B"
on front of jaws to
open them.
(SEE BELOW)
7.
With brushes locked in place, close jaws,
secure latch and insert pin.
4. Select the correct pads or brushes that
best meet your cleaning application.
Consult your local dealer for assistance.
5. Pad installation: attach pads to pad drivers
before connecting drivers to motor hub.
center clip
"C"
should click twice.
(SEE BELOW)
6. Attach brushes or pads to motor hubs.
Squeeze the scissor locking device and lift
brush up on to the motor drive hub. Make
sure the scissors close and lock once the
brushes are on.
(SEE BELOW)
INSTALLING DISK PAD DRIVER OR BRUSH
B
A
C
SCRUB BRUSHES
There are many different types of brushes available to
cover applications from cleaning heavily soiled floors
to polishing. A pad driver is also available to take
advantage of the many cleaning pads on the market.
Please refer to the following to assist in selecting the
proper brush or pad for the work at hand
Disk
## 421SS
##421S
##421C
##421PS
##421P
##421N
##421T
##421D
Disk
##422BB
##422B
##422BR
##422G
##422BL
##422R
##422W
Cylindrical
NA
##521S
##521C
##521PS
NA
##521N
##521T
NA
Cylindrical
NA
NA
NA
NA
NA
NA
NA
(10 The Highest)
10
9
8
6
5
2
1
(10 The Highest)
10
8
7
6
4
3
1
Brush Type
Super-grit
Tough-Grit
Midi-Grit
Light-Grit
Poly (.028)
Nylon (.012)
Tampico
Pad Driver
Pads
Super Black
Black
Brown
Green
Blue
Red
White
ABRASION
Very High
High
High
Moderate
Moderate
Light
Light
Not Applicable
Level
Very High
High
High
Medium
Moderate
Moderate
Light
Color
Red/Orange
Black
Blue/Grey
Grey
Black
White
Tan
NA
Color
Black
Black
Brown
Green
Blue
Red
White