Rabbit RabbitCore RCM4400W Product Manual - page 116
Manual is about: C-Programmable Wi-Fi Core Module
of
126
108
RabbitCore RCM4400W
NOTE: Jumper connections JP3–JP10, JP12, JP14, JP16, JP18, JP23, and JP24 are made
using 0
Ω surface-mounted resistors. Jumper connections JP11, JP13, JP15, JP17, and
JP19–JP22 are made using 470
Ω surface-mounted resistors.
JP20
LN5 buffer/filter to
RCM4400W
1–2
Connected
JP21
LN6 buffer/filter to
RCM4400W
1–2
Connected
JP22
LN7 buffer/filter to
RCM4400W
1–2
Connected
JP23
LN4_IN–LN6_IN
1–2
Tied to analog ground
×
2–3
Tied to VREF
JP24
LN0_IN–LN3_IN
1–2
Tied to analog ground
×
2–3
Tied to VREF
JP25
Thermistor Location
1–2
n.c.
Table B-4. RCM4400W Prototyping Board Jumper Configurations (continued)
Header
Description
Pins Connected
Factory
Default