Rabbit RabbitCore RCM4400W Product Manual - page 63
Manual is about: C-Programmable Wi-Fi Core Module
of
126
User’s Manual
55
6.2.2 What Else You Will Need
Besides what is supplied with the RCM4400W Development Kit, you will need a PC with
an available COM or USB port to program the RCM4400W module. You will need either
an access point for an existing Wi-Fi network that you are allowed to access and have a PC
or notebook connected to that network (infrastructure mode), or you will need at least a
PDA or PC with Wi-Fi to use the ad-hoc mode. If your PC only has a USB port, you will
also need an RS-232/USB converter (Part No. 540-0070).