Racelogic RLVBDSP04 Instruction Manual

Manual is about: OLED DISPLAY

Summary of RLVBDSP04

  • Page 1

    - 1 - 12/06/09 oled display manual rlvbdsp04 rlvbdsp05 oled display instruction manual (rlvbdsp04, rlvbdsp05–f, rlvbdsp05–l, rlvbdsp05-m and rlvbdsp05–h).

  • Page 2: Oled Display Manual

    - 2 - 12/06/09 oled display manual contents oled setup ............................................................................................................................ 4 video vbox pro / lite / waterproof .................................................................................. ...

  • Page 3: Oled Display Manual

    - 3 - 12/06/09 oled display manual set start & splits ............................................................................................................... 11 reset laptiming data ........................................................................................................ 12 cl...

  • Page 4: Oled Display Manual

    - 4 - 12/06/09 oled display manual oled setup video vbox pro / lite / waterproof when setting up the dsp04 oled display with a video vbox, it is important to connect to the correct port of the oled display. The oled display only has a serial connection on the lower connector, with the buttons on the...

  • Page 5: Oled Display Manual

    - 5 - 12/06/09 oled display manual display modes the oled display has different display modes that are accessed using the up and down buttons. The data displayed on each screen is calculated at all times, even if it is not currently displayed. Speed in this mode the screen will display a large clear...

  • Page 6: Oled Display Manual

    - 6 - 12/06/09 oled display manual fastest lap the difference between the new lap time and the best lap time will be shown with a + or – sign. A ‘–’ is shown when a faster than best is achieved and a ‘+’ is shown for a slower than best. Split line display if split lines have been set inside the oled...

  • Page 7: Oled Display Manual

    - 7 - 12/06/09 oled display manual predictive lap timing to use this, the oled must have start/finish information set, or an auto track-map element in the vvb scene. Until the start line is crossed, the screen will show ‘waiting for start line’. On the first lap, the oled will create a reference lap...

  • Page 8: Oled Display Manual

    - 8 - 12/06/09 oled display manual setup menu options - menu the oled display menu is accessed by pressing the  button when the ‘menu’ screen is shown. The menu can be navigated with the ▲ and ▼ buttons. Multiple scene selection the video vbox can store up to 8 user defined scenes. They are loaded ...

  • Page 9: Oled Display Manual

    - 9 - 12/06/09 oled display manual about in this section you can find serial numbers and firmware versions installed in the oled and connected vvb unit. Predictive lap timing settings bar range this setting alters the amount of +/- time shown on the bar graph during lap prediction. Either 2, 5, 10 o...

  • Page 10: Oled Display Manual

    - 10 - 12/06/09 oled display manual speed units if the  button is pressed the oled display allows the user the ability to select the units of the displayed speed. Highlight the desired measurement type and press  to select. Speed decimal places pressing the  button will cycle through 0, 1, and 2 ...

  • Page 11: Oled Display Manual

    - 11 - 12/06/09 oled display manual one shot mode this mode is used for timing from a standing start to a finish line – e.G. Sprint racing, hill climbs. When one shot mode is enabled, when the user comes to a stop, after 2s, the screen counts down from 5 then shows armed – start when ready. If the u...

  • Page 12: Oled Display Manual

    - 12 - 12/06/09 oled display manual reset laptiming data when this option is highlighted, pressing the  button causes the stored reference lap, lap count and lap times to be reset. Using this option fully resets predictive lap timing mode. Clear start & splits when this option is highlighted, press...

  • Page 13: Oled Display Manual

    - 13 - 12/06/09 oled display manual upgrading the oled display firmware it is recommended to check the web site periodically for updates. The oled upgrade files have a .Ruf file extension. The latest firmware for video vbox and oled can be found here . Upgrade oled through video vbox please note tha...

  • Page 14: Oled Display Manual

    - 14 - 12/06/09 oled display manual troubleshooting see below for possible error messages and causes. No sd card in vvb to upload file to. No reference lap file present on sd card to load into oled. Make sure file is called ‘oled.Ref’. Make sure you are stationary before attempting to load a referen...

  • Page 15: Oled Display Manual

    - 15 - 12/06/09 oled display manual connector assignments & specifications vbox oled display with waterproof aluminium housing (vbdsp04) compatibility vbox 3i, video vbox, vbox 20sx, vbox 20sl, vbox 20sl3, vbox iii, vbox micro, performance box sport. Choose lead below for correct connection. Unit co...

  • Page 16: Oled Display Manual

    - 16 - 12/06/09 oled display manual vbdsp05 - l pin i/o function 1 i rs232 rx 2 o rs232 rx 3 i/o can high 4 i/o can low 5 i +12 v power chassis i ground vbdsp05 - m pin i/o function 1 i rs232 rx 3 o rs232 tx 5 i ground 6 - unconnected 8 i power vbdsp05 - f pin i/o function 1 i power 2 i rs232 rx 3 o...

  • Page 17: Oled Display Manual

    - 17 - 12/06/09 oled display manual contact details address: racelogic, unit 10, swan business centre, osier way, buckingham, bucks. Mk18 1tb united kingdom email: support@racelogic.Co.Uk web: www.Racelogic.Co.Uk document updates rev date changes init page change draft 30-apr-09 -- draft version of ...