Racelogic RLVBDSP04 Instruction Manual - Oled Display Manual
- 13 -
12/06/09
OLED Display Manual
Upgrading the OLED Display firmware
It is recommended to check the web site periodically for updates. The OLED upgrade files have a .RUF file extension.
The latest firmware for Video VBOX and OLED can be found
here
.
Upgrade OLED through Video VBOX
Please note that you must be running at least VideoVBOX firmware version 003.000 Build 0025 to upgrade the OLED
like this.
New VVB firmware comes with OLED firmware built in. Upgrade the OLED by holding down the button highlighted
below while connecting the OLED to the VVB.
If a separate OLED upgrade is released, the firmware file can be placed file onto the root directory of an SD card and
loaded into a VVB. You can then run the upgrade in the same way.
Performing the Upgrade using a PC
An OLED upgrade cable of either RLACS151 or RLACS152 is required. If a local dealer has not purchased this cable,
then the OLED may need to be returned to Racelogic to have the upgrade carried out.
Plug the 9 way serial connector from the RLACS151/152 into a computer. Press and hold the down button on the
OLED (unit oriented with Racelogic text correct way up) while connecting power to the RLACS151/152. This will put
the OLED into ‘upgrader’ mode. Double-click on the downloaded firmware file and follow the on screen instructions
to complete the upgrade.
If you have any questions regarding the firmware upgrade of any Racelogic product, please do not hesitate to
contact
support@racelogic.co.uk
Hold and apply power