Racelogic RLVBDSP04 Instruction Manual - Oled Display Manual
- 5 -
12/06/09
OLED Display Manual
Display Modes
The OLED display has different display modes that are accessed using the up and down buttons. The data displayed
on each screen is calculated at all times, even if it is not currently displayed.
Speed
In this mode the screen will display a large clear speed value to 2 decimal
places, including the units, mph or km/h. The number of decimal places
displayed can be adjusted through the OLED menu.
Logging control
To start or stop the VVB logging data, press the button when in Speed Display mode.
Logging Status
If the VBOX is logging, the OLED display will indicate this by scrolling a bar across the bottom of the screen.
Max Speed
In this mode the screen will show the highest achieved speed value to 0, 1 or 2 decimal places.
Max Speed Reset
If the button is pressed then the unit will reset the displayed maximum speed value.
Lap timing
All lap times and split times are interpolated to 0.01 second resolution. If start/finish and splits have been setup in
the Video VBOX scene, they will be automatically transferred to the OLED display when connected. Check the OLED
shows a message confirming successful transfer of start/finish and split information.
In this mode the screen can display
either a live rolling lap time or a
static last lap time and the lap
count. This is set from within the
menu screen.