Summary of V-RAD
Page 1
Leading manufacturer of advanced torque systems v-rad user manual electronic battery pneumatic electric.
Page 2
Push-button select torque fast and convenient error-free digital single increment torque settings digital torque console display maximum accuracy by seeing the set torque value and the actual delivered torque value lightweight and ergonomic pistol grip design advanced low-profile handle to reduce op...
Page 3
V-rad user manual new world technologies inc. Page • 1 v2014.07.03 table of contents table of contents ..................................................................... 1 manual revision history ........................................................ 2 important safety notice .....................
Page 4
V-rad user manual new world technologies inc. Page • 2 v2014.07.03 manual revision history revision: 2014.07.03.
Page 5
V-rad user manual new world technologies inc. Page • 3 v2014.07.03 important safety notice rad tools are safe and reliable. Not following precautions and instructions outlined here can result in injury to the tool, operator and fellow workers. New world technologies incorprated is not responsible fo...
Page 6
V-rad user manual new world technologies inc. Page • 4 v2014.07.03 1.0 general information 1.1 system components the v-rad tool system is shipped from new world technologies inc. In a case with the following parts: - v-rad tool (figure 1.1-1) - standard reaction arm and snap ring (figure 1.1-2) - ca...
Page 7
V-rad user manual new world technologies inc. Page • 5 v2014.07.03 2.0 power requirements the installer of this equipment is responsible for complying with national electrical code (nec) or equivalent and federal and local guidelines and application codes that govern protection, earth grounding, dis...
Page 8
V-rad user manual new world technologies inc. Page • 6 v2014.07.03 figure 3.1-1: v-rad 3.1.1 trigger lock the trigger lock is useful while transporting or storing the v-rad tool system. The trigger lock disables the use of the on/off trigger, therefore disabling the tool. It is suggested that while ...
Page 9
V-rad user manual new world technologies inc. Page • 7 v2014.07.03 figure 3.3-1: setting dials warning! Do not use the v-rad with the numeric dial at “+”. This will result in damage to the tool and void warranty. Warning! The selection switch located on the top of the tool must always be pushed to t...
Page 10
V-rad user manual new world technologies inc. Page • 8 v2014.07.03 figure 4.1.1-1: reaction point caution! Keep your hand and body parts clear of the reaction arm and barrel when the tool is in operation. Figure 4.1.1-2: incorrect placement of hand/body parts during operation 4.1.2 reaction arm heig...
Page 11
V-rad user manual new world technologies inc. Page • 9 v2014.07.03 incorrect: the leg of the reaction arm is too short on the left side, and too long on the right side. Figure 4.1.2-2: incorrect height improper reaction will void warranty and can cause premature tool failure. 4.1.3 reaction arm foot...
Page 12
V-rad user manual new world technologies inc. Page • 10 v2014.07.03 correct : reaction arm is reacting off the middle of the reaction arm’s foot. Figure 4.1.4-1: correct reaction point incorrect : reaction arm is reacting off the heel of the reaction arm. This can cause premature tool failure. Figur...
Page 13
V-rad limited warranty new tool warranty any new tool branded with the rad name and purchased from new world technologies inc., or through one of its authorized distributors or agents, is warranted to the original purchaser against defects in materials and workmanship for a period of one (1) year fr...