- DL manuals
- Radenso
- Radar Detector
- Pro Series
- User Manual
Radenso Pro Series User Manual
Summary of Pro Series
Page 1
Pro series user manual © 2015 radenso®.
Page 2
Radar detector radenso pro foreword congratulation to your new investment. You chose one of the best gps enabled mobile radar- and laser detector available on the market today. The radenso pro is high tech made in europe packaged into the smallest detector in the world. The focus of the development ...
Page 3: Quick Start Up Guide
Quick start up guide to start using your radenso pro radar detector follow these easy steps: 1. Slide the windshield mounting bracket into the quickmount slot at the front of the radar detector 2. Plug the small end of the power cable into the power jack of radenso pro on the left side of the detect...
Page 4
Function of control buttons power / menu button short press: you will enter into setup menu. During an alert pressing the button mutes the volume. The next alarm will be reported again with the default vol. Long press: turn unit on / off volume buttons [+ - ] short press: changing volume of radenso ...
Page 5: Installation
Installation the radenso pro windshield mount allows a firm and secure installation of the radar detector at the windshield of your vehicle. Locate an area at the windshield that enables an unobtrusive installation with clear view to the road ahead. 1. Place the nipple of the suction cups in the lar...
Page 6
Control buttons on top and side of unit: left button menu / on-off short press: you will enter into setup menu. During an alert pressing the button will mute the volume. The next alarm will be reported again in the standard volume. Long press: turn on / off radenso pro. Middle button brightness / al...
Page 7
Menu and user selectable features press left button to enter menu mode. Press left button again to go from one menu option to the next. Press volume + or – button (on the right side of detector) to change your setting within the category. To save the changed selection simply wait a few seconds witho...
Page 8
Selectable feature description setting ka band activate/deactivate ka band wide narrow off ka pop band activate/deactivate ka pop on off laser band activate/deactivate laser on off start up sound on off gps connected anouncement on off gps detetcion by database type via middle button you can select ...
Page 9: Setting Autocity Speed
Setting autocity speed the autocity driving mode allows the setting of minimum alert detection speed for signal suppression and signal filtering resulting in significantly reduced false alerts. Select autocity in setting mode setting autocity speed: (feature selectable only if setting mode is set to...
Page 10: Troubleshooting
Troubleshooting problem root cause / corrective action the detector will not turn on - check if power cable is connected - the power cable has not been switched on at the power plug. Make sure the red light at power plug is lit. - turn on ignition display is not turning on - power cable is disconnec...
Page 11: Technical Specification
Technical specification operating frequency: gps: sirf star iv ka narrow: 33.80, 34.7ghz, 35,5ghz (± 120mhz) ka wide: 33.4 ghz - 36.0 ghz k narrow: 24.125ghz (± 70mhz) k wide: 24.125ghz (± 150mhz) x band: 10.525ghz (± 50mhz) laser: 904nm technical parameters: operating temperature: --30° - +180 ° f ...
Page 12
Two (2) year limited warranty radenso warrants, for two years, to the original retail owner, this radenso product to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below. Warranty duration: this warranty to the original user is valid for 24 months...