Radenso Pro Series User Manual - page 6
Control buttons on top and side of unit:
Left button MENU / ON-OFF
Short press: You will enter into setup menu. During an alert pressing the button will mute the volume. The
next alarm will be reported again in the standard volume.
Long press: Turn ON / OFF Radenso Pro.
Middle button BRIGHTNESS / ALERT SUPPRESSION
Short press: You can change the brightness of the display - Bright -> Dim -> Smart Dark -> Full Dark
Bright: Brightest display setting.
Dim: Slightly dimmed display.
Smart Dark:
Full Dark:
Display is deactivated but will come on with Text warning during an alert.
Display is completely deactivated. Only voice and tone alerts are active.
Long Press: Holding the button during an obvious false alert will lockout the location in the future. The
signal will no longer be reported and the alarm suppressed when passing the marked location again. You
can re-activate the location again by holding the button when approaching the marked location.
During start up: Pressing and holding the button during start up will reset Radenso Pro to
factory default settings and will display the uploaded Firmware version.
Right button SENSITIVITY / ADD YOUR OWN GPS POINT
Short press: You can scroll between Highway / City / Auto City modes. In City or Auto City modes the
sensitivity of X / K / Ka bands can be reduced according to user preference.
Long Press: Add your own POI GPS point for future alarms.
+ / -Buttons on the right side
Short press: Changing alert volume of Radenso Pro or change program options while in Menu Mode.
Page 5