Radiant DIAGNOCODE SM 20015 Instruction Manual - page 8
P.C.B. SM 20015 –boiler settings
5
Parameter
1
setting: BOILER TYPE SELECTION
To modify the
Parameter value
:
a. Put ON/OFF button
1
in OFF position (
);
b. Push pad
6
and
simultaneously and keep them pressed;
c. Put ON/OFF button
1
in ON position (
)
and wait until the display shows
-
;
d. Release pad
6
and
;
e. Keeping pad
5
pressed, press pad
6
and select parameter no.
;
f. Release service pad
5
; press and release service pad
5
;
g. The display
will show the parameter value to be set or modified;
h. Press pad
6
or
to modify (increase or decrease) the parameter value
instantaneous type,
storage type or
storage
type comfort;
i. Press and release service pad
5
to confirm setting;
j. The display will show parameter no.
;
k. Position ON/OFF button
1
first in OFF position (
) and back to ON position (
);
Parameter
2
setting: GAS TYPE SELECTION
To modify the
Parameter value
:
a.
Put ON/OFF button
1
in OFF position (
);
b. Push pad
6
and
simultaneously and keep them pressed;
c. Put ON/OFF button
1
in ON position (
)
and wait until the display shows
-
;
d. Release pad
6
and
;
e. Keeping pad
pressed, press pad
6
and select parameter no
;
f. Release service pad
5
; press and release pad service
;
g. The display
will show the parameter value to be set or modified;
h. Press pad
6
or
to modify (increase or decrease) the parameter value
NATURAL GAS,
L.P.G ;
i. Press and release service pad
to confirm setting;
j. The display will show parameter no.
;
k.
Position ON / OFF button
1
first in OFF position (
) and back to ON position (
);
PL
0
00
01
02
1
00
01
2
2
1
Pl
0