Radiant P1220 Configuration Manual - page 11
Configuring Radiant POS terminals
11
14. Click the
Ports tab, select an unused Serial Port (e.g., COM4), and then click OK.
NOTE: Alternatively, you can delete the Epson TM-T88 – Serial printer, instead of assigning
it to an unused port.
15. Start CounterPoint and log in to your company database.
16. Select
File Utilities / Special / System / Update pre-defined data.
17. Select
Yes from the Are you sure you want to do this ? prompt, and then press Enter to
load the pre-defined device codes for Radiant POS terminals.
18. When the pre-defined data is updated, press
ESC to return to the main menu.
19. Select
Setup / Point of Sale / Registers, specify a Register number for your POS terminal,
and then complete the remaining fields on the first
Registers screen.
20. On the next
Registers screen, enter 1220 in the Device code field for the Printer 1 device,
select the
Print method you want to use, and then enter COM1 in the corresponding
Device ID field.
21. Enter or look up one or more
Form ID options to specify the forms you want to print
with your receipt printer.
22. On the next
Registers screen, enter 1220 in the Device code field for the Card reader
device.