Radiant P1220 Configuration Manual - page 8
Configuring Radiant POS terminals
8
14. On the next
Registers screen, enter 1520 in the Device code field for the Printer 1 device,
select the
Print method you want to use, and then enter COM3 in the corresponding
Device ID field.
15. Enter or look up one or more
Form ID options to specify the forms you want to print
with your receipt printer.
16. On the next
Registers screen, enter 1520 in the Device code field for the Display device,
and then enter
COM4 in the corresponding Device ID field.
17. Press
Enter at the Field number to change ? prompt to save your changes, and then
press
ESC to close the Registers screen and return to the main menu.
18. Select
Setup / Point of Sale / Drawers, specify a Drawer number and Register number for the
POS terminal’s cash drawer, and then enter a
Description for the drawer.
19. Enter
1520 in the Drawer device code field, and then enter COM3 in the Drawer device ID
field.
20. Press
Enter at the Field number to change ? prompt to save your changes, and then
press
ESC to close the Drawers screen and return to the main menu.