Radio Terminal TK20 User Manual - page 11
SMS:
*soson*
Device Response:
“
Notice
:
SOS alert function enabled.”
SMS:
*sosoff*
Device Response:
“
Notice
:
SOS alert function disabled.”
NOTE: The default setting is OFF. Please send SMS *soson* to enable this
function. And all bounded numbers are capable to control device as master
controller does.
16. Low battery Alert:
The device is equipped with an automatic “Low Battery” detection and alert
when the battery drops to 20% of it’s capacity. An alert SMS will be sent to
appointed phone number and the real-time tracking function will be turned off
for power saving.
Appointed alert number settings
Default alert phone number is registered master number, and it can be
changed as needed.
SMS:
*lowbat*
+1XXXXXXXXXXXX*
, (For instance, master controller
phone number is +1XXXXXXXXXXXX. +1 refers to the country code.
XXXXXXXXXXXX is the cellphone number. Please make sure country code is
included, and digit 0 is not needed before cell phone number)
Command Setting List
Function
Command
Description
APN Setting
*apn*AXXX*BXXX*CXXX*
This command sets the
telecom Access Point
Name. BXXX refers to
user name, CXXX refers
to password.
Master Setting
*master*123456*+1XXXXX
XXXXXXX*
+1 refers to the country
code. XXXXXXXXXXXX is
the cellphone number.
Please make sure country
code is included, and 0 is
not needed before cell
phone number
Радиотерминал 121059, Москва, 1-й Можайский тупик, д. 8а, стр. 1, этаж 2 тел. : +7 (499) 641-0464 +7 (812) 600-6040
www.radioterminal.ru info@radioterminal.ru