Radio Terminal TK20 User Manual - page 6
Account Login Password: Default as 123456.
It can be changed on the tracking website.
Recommended Web browser are Chrome, Firefox or cellphone default
browser.
9.1 Real-time Tracking
This function delivers a highly granular tracking record of a specific route.
Once motion is detected, every 10 seconds locate records are uploaded every
1 minute to the server during motion.
This function is suitable for speed moving object tracking. And it works in
motion only.
9.1 By SMS
SMS:
*routetrack*1-99*
(1-98 represents hours of accumulated data, 99
means always on)
Device Response: “Notice: System has entered routetrack function for *XX*
hours.” If you sent 99 the device responds: “Notice: Routetrack function is set
to always on.”
9.1.1 Real-time tracking location data collecting interval.
The smaller interval, the higher accuracy, but the higher power consumption.
SMS
*rsampling*1-999*
(1-999 represents seconds of data collecting
interval, default as 10 seconds)
9.1.2 Real-time tracking location data upload interval. The smaller
interval, the higher accuracy, but the higher power consumption.
SMS
*rupload*60-999*
(60-999 represents seconds of data uploading
interval, default as 60 seconds, minimum rate should not be less than 60)
SMS
*routetrackoff*
Device Response: “Notice: System has ended routetrack function.”
9.2 Check Location
This check function enables device to collect location data regularly and
uploaded to server in appointed interval.This command can be used both in
idle and in motion, and able to work with route track function at the same
time.
Радиотерминал 121059, Москва, 1-й Можайский тупик, д. 8а, стр. 1, этаж 2 тел. : +7 (499) 641-0464 +7 (812) 600-6040
www.radioterminal.ru info@radioterminal.ru