Radionics K6100 User Instructions
Windows™ is a trademark of Microsoft Corporation
______________________________ K6100 User Instructions ________________________ 17231
74-07606-000-A 02/96
Page 1
© 1996 Radionics, Inc
Logging In
If an ID device has been issued:
1. Use your ID device with the desktop administration or Central Network Controller
(CNC) reader, the name assigned to this operator will appear in the
User name
box.
2. If a password is required the cursor will move to the
Password box. Type your
password (displayed as asterisks) and press
ENTER or choose OK to go into the
Readykey application icons.
If no ID device has been issued:
1. Type your
User name.
2. If no password is required, press
ENTER or choose OK to go straight to the
Readykey application icons.
3. If a password is required, press the
TAB key to move to the Password box, type
the password (displayed as asterisks) and press
ENTER or choose OK to go into
the Readykey application icons.
Note: If issued, the operator ID device must be used to gain access into the system.
If the message 'Login Incorrect - Access Disallowed' is displayed then you may have
presented an invalid ID device, typed your name incorrectly or entered the wrong
password. Choose
OK and try using a different ID device or entering the information
again.
Logging Out
To Logout:
1. Go to the main Readykey application icons screen
2. Choose
Logoff from the menu bar.
The
Login screen is now displayed and no-one else can use the system without first
logging in. In this state, transactions are still being recorded and you will still be
alerted to alarms as they occur.
R A D I O N I C S
R
EADYKEY
K6100 READYKEY FOR WINDOWS™
User Instructions