K6100 / k6300-cncii central network controller user guide 17317 ver 1.2/48569b.
K6100-cnc user guide 17317 ver 1.2/48569b page 2 © 2001 radionics.
K6100-cnc k6100-cnc user guide © 2001 radionics page 3 17317 ver 1.2/48569b 1.0 introduction ............................................................................................... 4 2.0 terminology ................................................................................................
K6100-cnc introduction k6100-cnc user guide 17317 ver 1.2/48569b page 4 © 2001 radionics 1.0 intro duction this document describes the use of a central network controller (cnc) in a readykey access control system. The cnc allows the administration pc(s) to communicate with readykey door controllers ...
K6100-cnc terminology k6100-cnc user guide © 2001 radionics page 5 17317 ver 1.2/48569b keyholder being added - this would require the keycode and access information to be sent to the door controllers. 2.2 notat ion in the remainder of this document, the following is used to describe parts of the me...
K6100-cnc administration readers k6100-cnc user guide 17317 ver 1.2/48569b page 6 © 2001 radionics 3.0 adm inistration readers administration readers are used for a number of purposes: • logging into the pc administration software (readykey 6000 or readykey for windows) • keyholder administration • ...
K6100-cnc display messages k6100-cnc user guide © 2001 radionics page 7 17317 ver 1.2/48569b 5.3.2 priority 2 - communications errors ssss d/ccc erree this indicates an error in the communications link between the cnc and a door controller. In this case erree represents the error number. E.G. S001 d...
K6100-cnc display messages k6100-cnc user guide 17317 ver 1.2/48569b page 8 © 2001 radionics site sss*00000 for that site. 5. During a download, the number of updates will change rapidly as described below. 5.3.4 priority 3 - monitoring ** monitoring ** this message means that the pc is connected to...
K6100-cnc alarms k6100-cnc user guide © 2001 radionics page 9 17317 ver 1.2/48569b 6.0 alarm s the cnc will display alarm messages when it cannot communicate with the pc for some reason - as described above. There are four types of alarm messages that may be displayed on the cnc. 6.1 unau thorized a...
K6100-cnc initialize/download to site k6100-cnc user guide 17317 ver 1.2/48569b page 10 © 2001 radionics 8.0 initia lize/download to site 8.1 what is an initialize/download? From time to time it may be necessary to perform a download operation to a door controller on a site. This process sends a new...
K6100-cnc initialize/download to site k6100-cnc user guide © 2001 radionics page 11 17317 ver 1.2/48569b you can now choose to perform a download to an individual door controller, or to all door controllers on a site. Select the correct door controller from the list (or select all to download to all...
K6100-cnc © 2001 radionics, a division of detection systems, inc. Po box 80012, salinas, ca 93912-0012, usa customer service: (800) 538-5807 17317 ver 1.2/48569b user guide k6100-cnc page 12 of 12 notes.
