Rain Bird ISM Instruction Manual - Set Station Duration

ISM Installation, Programming & Operation Guide

Page 25

Set Station Duration

steps for one program. If you are finished

programming, turn the Programming Dial to

the SYSTEM ON position to run all programs

automatically. If you want to enter settings for

another program, repeat the programming

instructions, beginning with “Select Program

(A, B or C)” on page 19.

1. Turn the Programming Dial to SET STATION

DURATION.

2. The program letter (A, B or C), the number

“1” (indicating the station number), and “0”

appear in the display.

3. Press the (+) or (-) buttons to set the

amount of time you want it to run for

station number 1. You can set a station to

run from 0 minutes up to 240 minutes

(four hours), in one-minute increments. All

durations display in minutes (for example,

a two hour duration will appear as 120

minutes).

NOTE: If you do not want to include a

particular station in the selected

program, set that station’s duration

to zero “0”.

4. Press Enter to display additional stations.

Repeat steps 3 and 4 to set a duration for

each station.

You have now completed all programming