Rain Bird ISM Instruction Manual - Manually Run A Station(S)

ISM Installation, Programming & Operation Guide

Page 30

Manually Run Stations and Programs

in the display, along with its remaining run

time. You can press Enter to manually

advance to the next station.

When manual operation finishes, the timer

returns to SYSTEM ON mode and awaits the

next scheduled program start time.

You can run individual stations or an entire

program if you think a particular area needs

additional watering.

Manually Run a Station(s)

1. Turn the Programming Dial to RUN

STATIONS MANUALLY.

2. The number “1” followed by “0” appears in

the display. This means that station

number 1 is set for zero manual run time.

3. If you want to manually run a station other

than number 1, press Enter until the desi-

red station number appears in the display.

4. If you want to manually run the displayed

station, press the (+) or (-) buttons to set

the station’s manual run time (from 1

minute to 240 minutes).

5. Press Enter to begin watering.

6. After setting the manual run time for all

stations desired, turn the Programming

Dial back to SYSTEM  ON. The number of

the first manually operated station appears