Rain Bird ISM Instruction Manual - System On

ISM Installation, Programming & Operation Guide

Page 27

System On

1. To return the timer to automatic operation,

turn the Programming Dial to SYSTEM ON.

2. When the timer IS NOT watering, it

displays:

• Any program (A, B or C, or none)

scheduled to water today.

• The current time.

• %A %B %C, if there is a Seasonal

Adjust setting other than 100%.

3. When the timer IS watering, it displays:

• Any programs (A, B or C) scheduled to

run today.

• The station number currently running.

• The duration time remaining for that

station.

• %A %B %C, if there is a Seasonal

Adjust setting other than 100%.

4. If a problem or short is detected in any of

the stations, the display toggles every 3

seconds and shows an error message "Err

#", # being the station where the problem

was detected.  For example, if the master

valve has a problem, it shows "Err M". For

station 3 - "Err 3". The station is

automatically ignored until the cause of

error is corrected. Refer to the Trouble-

shooting section of this manual for more

information.