Rain Bird ISM Instruction Manual - Manually Run A Program

ISM Installation, Programming & Operation Guide

Page 31

Manually Run a Program

1. Turn the Programming Dial to RUN

PROGRAM MANUALLY (RPM).

2. The current program “A, B or C” appears

in the display.

3. To choose another program, press the

Prog ABC button until the desired program

letter appears in the display.

4. Press Enter to start the selected program.

NOTES: You can “stack” programs (A,

B and C) to operate manually by

pressing Enter after selecting each

program. Programs will run in order

in which they are entered.

5. Turn the Programming Dial back to

SYSTEM ON. The station currently running

and the time remaining is shown in the

display.

NOTE: “Seasonal Adjust” settings

apply to manually operated

programs.

After the last manual program runs, the timer

returns to SYSTEM ON mode and awaits the

next scheduled program start time.

NOTE: Manually operating a station

does not affect the station’s run

time(s) in the automatic programs (A,

B or C).