Raket 95 Owner's Manual - Installing The Nimh Battery.
www.raketengines.com
Raket 95 Manual - English
9
Installing the NiMH battery.
1.
The battery is delivered in a battery box
made of extruded aluminium.
2.
The battery box is to be mounted onto a
console that is in turn to be mounted onto
the frame to the left of the driver’s seat,
using the supplied mounting components.
3.
The start button and the charger plug can
be found on the battery box. In the box
there is also a 40 A fuse that prevents the
battery from being destroyed if a short
should occur outside of the battery box.
The fuse may only be changed for an
identical fuse that can be purchased as a
spare part from a Raket reseller.
4.
A cable leads from the battery box which
should be connected to the starter motor.
There is a plug on the cable that should
be connected to the equivalent plug on
the starter motor.
5.
The cables between the battery box and
the starter motor should be carefully
fastened to the frame by using suitable
cable clips or ties. The cables should
be fastened in such a manner that they
cannot come into contact with any hot or
warm parts of the engine that might melt
the cable casing, nor with any moving
parts that might render holes in the cable
casing.