1. DL manuals
  2. RAM
  3. Trucks
  4. Trucks 1500
  5. Owner's Manual

RAM Trucks 1500 Owner's Manual

Manual is about: 2016

Summary of Trucks 1500

  • Page 1

    1 5 0 0 / 2 5 0 0 / 3 5 0 0 o w n e r ’ s m a n u a l 2 0 1 5 2015 ram truck 1500/2500/3500 15d241-126-ad fourth edition printed in u.S.A. R a m t r u c k fca us llc.

  • Page 2

    Vehicles sold in canada with respect to any vehicles sold in canada, the name fca us llc shall be deemed to be deleted and the name fca canada inc. Used in substitution therefore. Driving and alcohol drunken driving is one of the most frequent causes of accidents. Your driving ability can be serious...

  • Page 3: Table Of Contents

    Table of contents section page 1 introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 things to know before starting your vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 3 understa...

  • Page 5: Introduction

    Introduction contents 䡵 introduction . . . . . . . . . . . . . . . . . . . . . . . .4 䡵 how to use this manual . . . . . . . . . . . . . .4 䡵 warnings and cautions . . . . . . . . . . . . . .6 䡵 van conversions/campers . . . . . . . . . . . .6 䡵 vehicle identification number . . . . . . . .6 䡵 vehic...

  • Page 6

    Introduction congratulations on selecting your new fca us llc vehicle. Be assured that it represents precision workman- ship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. This owner’s manual has been prepared with the assis- tance of service and engine...

  • Page 7

    1 introduction 5.

  • Page 8

    Warnings and cautions this owner’s manual contains warnings against operating procedures that could result in a collision or bodily injury. It also contains cautions against proce- dures that could result in damage to your vehicle. If you do not read this entire owner’s manual, you may miss importan...

  • Page 9

    Frame and underbody as well as the automobile infor- mation disclosure label affixed to a window on your vehicle, the vehicle registration and title. Note: it is illegal to remove or alter the vin. Vehicle modifications/alterations warning! Any modifications or alterations to this vehicle could seri...

  • Page 11: Contents

    Things to know before starting your vehicle contents 䡵 a word about your keys . . . . . . . . . . . . .12 ▫ ignition node module (ignm) . . . . . . . . . . . .12 ▫ keyless push button ignition — if equipped . . .13 ▫ key fob . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 ▫ removing key ...

  • Page 12

    ▫ using the panic alarm . . . . . . . . . . . . . . . . . .28 ▫ rke air suspension (remote lowering of the vehicle) — if equipped . . . . . . . . . . . . . . . . . .29 ▫ programming additional transmitters. . . . . . . .29 ▫ transmitter battery replacement . . . . . . . . . . .30 ▫ general informati...

  • Page 13

    ▫ safety checks you should make inside the vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115 ▫ periodic safety checks you should make outside the vehicle . . . . . . . . . . . . . . . . . . . . . . . . .117 2 things to know before starting your vehicle 11.

  • Page 14

    A word about your keys your vehicle uses either a key start ignition system or keyless ignition system. The key start ignition system consists of a either a bladed key with an immobilizer chip in it, or a key fob with remote keyless entry (rke) transmitter and an ignition node module (ignm). The key...

  • Page 15

    Keyless push button ignition — if equipped this feature allows the driver to operate the ignition switch with the push of a button as long as the remote keyless entry (rke) transmitter is in the passenger compartment. The keyless push button ignition has four operating positions; three of which are ...

  • Page 16

    Key fob key fob — if equipped the key fob operates the ignition switch. Insert the square end of the key fob into the ignition switch located on the instrument panel and rotate to the desired posi- tion. It also contains the remote keyless entry (rke) transmitter and an emergency key, which stores i...

  • Page 17

    Keyless push button ignition key fob — if equipped this keyless push button ignition key fob allows the driver to operate the ignition switch with the push of a button, as long as the remote keyless entry (rke) transmitter is in the passenger compartment. The keyless push button ignition has four op...

  • Page 18

    Note: you can insert the double-sided emergency key into the door lock cylinder with either side up. Removing key fob from ignition place the shift lever in park (if equipped with an automatic transmission). Turn the key fob to the off position and then remove the key fob. Note: • the power window s...

  • Page 19

    • for vehicles equipped with a touchscreen radio, refer to “uconnect® settings” in “understanding your in- strument panel” for further information. Caution! • if your vehicle battery becomes low or dead, your key fob will become locked in the ignition. • do not attempt to remove the key fob while in...

  • Page 20

    Warning! (continued) • do not leave the key fob in or near the vehicle, or in a location accessible to children, and do not leave the ignition of a vehicle equipped with keyless enter-n-go in the acc or on/run mode. A child could operate power windows, other con- trols, or move the vehicle. • do not...

  • Page 21

    Sentry key® the sentry key® immobilizer system prevents unau- thorized vehicle operation by disabling the engine. The system does not need to be armed or activated. Operation is automatic, regardless of whether the vehicle is locked or unlocked. The system uses a key fob with a factory-mated remote ...

  • Page 22

    Caution! The sentry key® immobilizer system is not compat- ible with some aftermarket remote starting systems. Use of these systems may result in vehicle starting problems and loss of security protection. All of the key fobs provided with your new vehicle have been programmed to the vehicle electron...

  • Page 23

    Customer key programming programming key fobs or rke transmitters may be performed at an authorized dealer. General information the sentry key® system complies with fcc rules part 15 and with rss-210 of industry canada. Operation is subject to the following conditions: • this device may not cause ha...

  • Page 24

    To arm the system follow these steps to arm the vehicle security alarm: 1. Remove the key from the ignition system (refer to ⬙starting procedures⬙ in ⬙starting and operating⬙ for further information). • for vehicles equipped with keyless enter-n-go™, make sure the vehicle ignition system is ⬙off.⬙ •...

  • Page 25

    To disarm the system the vehicle security alarm can be disarmed using any of the following methods: 1. Push the unlock button on the remote keyless entry (rke) transmitter. 2. Grasp the passive entry unlock door handle with a valid key fob within 5 ft (1.5 m) of the passive entry door handle (if equ...

  • Page 26

    Security system manual override the vehicle security alarm will not arm if you lock the doors using the manual door lock plunger. Illuminated approach the courtesy lights will turn on when you use the remote keyless entry (rke) transmitter to unlock the doors or open any door. This feature also turn...

  • Page 27

    Remote keyless entry (rke) the rke system allows you to lock or unlock all doors, tailgate, and the rambox® (if equipped) as well as activate the panic alarm from distances up to approxi- mately 66 ft (20 m) using a hand-held radio transmitter with integrated key. The transmitter does not need to be...

  • Page 28

    Remote unlock the doors push and release the unlock button on the rke transmitter once to unlock the driver’s door. Push the unlock button twice within five seconds to unlock all doors, the tailgate and the rambox® (if equipped). The turn signal lights will flash to acknowledge the unlock signal. Th...

  • Page 29

    Note: pushing the lock button on the rke transmitter while you are inside the vehicle will activate the vehicle security alarm system. Opening a door with the vehicle security alarm system activated will cause the alarm to sound. Push the unlock button to deactivate the vehicle security alarm system...

  • Page 30

    • for vehicles equipped with a touchscreen radio, refer to “uconnect® settings” in “understanding your in- strument panel” for further information. Note: pushing the lock button on the rke transmitter while you are in the vehicle will activate the vehicle security alarm system. Opening a door with t...

  • Page 31

    Rke air suspension (remote lowering of the vehicle) — if equipped for easy entry and loading, your vehicle can be lowered by pushing the key fob air suspension lowering button two times. When remote key fob lowering is requested, the vehicle will send a series of chirps and flashes to alert the cust...

  • Page 32

    Transmitter battery replacement the recommended replacement battery is one cr2032 battery. Note: • perchlorate material — special handling may apply. See www.Dtsc.Ca.Gov/hazardouswaste/perchlorate • do not touch the battery terminals that are on the back housing or the printed circuit board. 1. Remo...

  • Page 33

    2. Separating rke halves requires screw removal – if equipped, and gently prying the two halves of the rke transmitter apart. Make sure not to damage the seal during removal. Emergency key removal remove screw from transmitter case 2 things to know before starting your vehicle 31.

  • Page 34

    Separating transmitter case separating transmitter case 32 things to know before starting your vehicle.

  • Page 35

    3. Remove the battery by turning the back cover over (battery facing downward) and tapping it lightly on a solid surface such as a table or similar, then replace the battery. When replacing the battery, match the + sign on the battery to the + sign on the inside of the battery clip, located on the b...

  • Page 36

    Remote starting system — if equipped this system uses the remote keyless entry (rke) transmitter to start the engine conve- niently from outside the vehicle while still maintaining security. The system has a range of approximately 300 ft (91 m). Note: • the vehicle must be equipped with an automatic...

  • Page 37

    Warning! • do not start or run an engine in a closed garage or confined area. Exhaust gas contains carbon mon- oxide (co) which is odorless and colorless. Carbon monoxide is poisonous and can cause serious in- jury or death when inhaled. • keep remote keyless entry (rke) transmitters away from child...

  • Page 38

    • if an engine fault is present or fuel level is low, the vehicle will start and then shut down in 10 seconds. • the park lamps will turn on and remain on during remote start mode. • for security, power window and power sunroof op- eration (if equipped) are disabled when the vehicle is in the remote...

  • Page 39

    The remote start comfort system can be activated and deactivated through the uconnect® system. Refer to ”customer programmable features” in “uconnect® set- tings” in “understanding your instrument panel” for further information on remote start comfort system operation. Door locks manual door locks f...

  • Page 40

    The emergency key will unlock the driver door lock on your vehicle. Warning! • do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death. • for personal security and safety in the event of an collision, lock the vehicle doors as ...

  • Page 41

    Power door locks — if equipped a power door lock switch is on each front door trim panel. Use this switch to lock or unlock the doors. If you push the power door lock switch while the key fob is in the ignition, and any front door is open, the power locks will not operate. This prevents you from acc...

  • Page 42

    Automatic doors unlock programming — if equipped the automatic doors unlock feature can be enabled or disabled as follows: • for vehicles not equipped with a touchscreen radio, refer to “electronic vehicle information center (evic)/settings (customer-programmable features)” in “understanding your in...

  • Page 43

    To use the system, open each rear door, use a flat blade screwdriver (or emergency key) and rotate the dial to engage and disengage the child-protection locks. When the system on a door is engaged, that door can only be opened by using the outside door handle even if the inside door lock is in the u...

  • Page 44

    Keyless enter-n-go™ the passive entry system is an enhancement to the vehicle’s remote keyless entry (rke) system and a feature of keyless enter-n-go™. Refer to “keyless enter- n-go™” in “starting and operating” for further infor- mation. This feature allows you to lock and unlock the vehicle’s door...

  • Page 45

    Note: if “unlock all doors 1st press” is programmed, all doors will unlock when you grab hold of the front driver’s door handle. To select between “unlock driver door 1st press” and “unlock all doors 1st press,” refer to “uconnect® settings” in “understanding your instru- ment panel” for further inf...

  • Page 46

    If one of the vehicle doors is open and the door panel switch is used to lock the vehicle, once all open doors have been closed the vehicle checks the inside and outside of the vehicle for any valid passive entry rke transmitters. If one of the vehicle’s passive entry rke transmitters is detected in...

  • Page 47

    Note: • after pushing the door handle lock button, you must wait two seconds before you can lock or unlock the doors, using either passive entry door handle. This is done to allow you to check if the vehicle is locked by pulling the door handle, without the vehicle reacting and unlocking. • the pass...

  • Page 48

    Windows power windows — if equipped the control on the left front door panel has up-down switches that give you fingertip control of all power windows. There is a single opening and closing switch on the front passenger door for passenger window control and on the rear doors of the quad cab and crew...

  • Page 49

    Warning! (continued) particularly unattended children, can become en- trapped by the windows while operating the power window switches. Such entrapment may result in serious injury or death. Auto-down both the driver and front passenger window switch have an auto-down feature. Push the window switch...

  • Page 50

    Note: if the window runs into any obstacle during the auto-closure, it will reverse direction and then go back down. Remove the obstacle and use the window switch again to close the window. Any impact due to rough road conditions may trigger the auto reverse function unex- pectedly during auto closu...

  • Page 51

    Wind buffeting wind buffeting can be described as the perception of pressure on the ears or a helicopter-type sound in the ears. Your vehicle may exhibit wind buffeting with the windows down, or the sunroof (if equipped) in certain open or partially open positions. This is a normal occur- rence and ...

  • Page 52

    Important safety precautions please pay close attention to the information in this section. It tells you how to use your restraint system properly, to keep you and your passengers as safe as possible. Here are some simple steps you can take to minimize the risk of harm from a deploying air bag: 1. C...

  • Page 53

    8. Do not lean against the door or window. If your vehicle has side air bags, and deployment occurs, the side air bags will inflate forcefully into the space between you and the door and you could be injured. 9. If the air bag system in this vehicle needs to be modified to accommodate a disabled per...

  • Page 54

    Enhanced seat belt use reminder system (beltalert) beltalert is a feature intended to remind the driver and outboard front passenger (if equipped with out- board front passenger beltalert) to buckle their seat belts. The feature is active whenever the ignition switch is in the start or on/run positi...

  • Page 55

    Note: if beltalert has been deactivated, the seat belt reminder light will continue to illuminate while the driver’s or outboard front passenger’s (if equipped with beltalert) seat belt remains unbuckled. Lap/shoulder belts all seating positions except the quad cab®, mega cab® and crew cab front cen...

  • Page 56

    Warning! (continued) • do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. • be sure everyone in your vehicle is in a seat and using a seat belt properly. • wearing your seat belt incorrectly could make your injuries in a collision much worse. You ...

  • Page 57

    Warning! (continued) • a seat belt that is too loose will not protect you properly. In a sudden stop, you could move too far forward, increasing the possibility of injury. Wear your seat belt snugly. • a seat belt that is worn under your arm is dangerous. Your body could strike the inside surfaces o...

  • Page 58

    Lap/shoulder belt operating instructions 1. Enter the vehicle and close the door. Sit back and adjust the seat. 2. The seat belt latch plate is above the back of the front seat, and next to your arm in the rear seat (for vehicles equipped with a rear seat). Grasp the latch plate and pull out the sea...

  • Page 59

    3. When the seat belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” 4. Position the lap belt so that it is snug and lies low across your hips, below your abdomen. To remove slack in the lap belt portion, pull up on the shoulder belt. To loosen the lap belt i...

  • Page 60

    5. Position the shoulder belt across the shoulder and chest with minimal, if any slack so that it is comfort- able and not resting on your neck. The retractor will withdraw any slack in the shoulder belt. 6. To release the seat belt, push the red button on the buckle. The seat belt will automaticall...

  • Page 61

    Inserting latch plate in use position 2 things to know before starting your vehicle 59.

  • Page 62

    2. Grasp the mini-latch plate and pull the seat belt over the seat. 3. Route the shoulder belt to the inside of the [right/ left] head restraint. 4. When the seat belt is long enough to fit, insert the mini-latch plate into the mini-buckle until you hear a “click.” 5. Sit back in seat. Slide the reg...

  • Page 63

    Warning! • if the mini-latch and mini-buckle are not properly connected when the seat belt is used by an occu- pant, the seat belt will not be able to provide proper restraint and will increase the risk of injury in a collision. • when reattaching the mini-latch and mini-buckle, ensure the seat belt...

  • Page 64

    As a guide, if you are shorter than average, you will prefer the shoulder belt anchorage in a lower position, and if you are taller than average, you will prefer the shoulder belt anchorage in a higher position. After you release the anchorage button, try to move it up or down to make sure that it i...

  • Page 65

    Warning! • only use a seat belt extender if it is physically required in order to properly fit the original seat belt system. Do not use the seat belt extender if, when worn, the distance between the front edge of the seat belt extender buckle and the center of the occupant’s body is less than 6 inc...

  • Page 66

    The pretensioners are triggered by the occupant re- straint controller (orc). Like the air bags, the preten- sioners are single use items. A deployed pretensioner or a deployed air bag must be replaced immediately. Energy management feature — if equipped this vehicle has a seat belt system with an e...

  • Page 67

    Regular cab quad cab®/mega cab®/crew cab • alr = switchable automatic locking retractor 2 things to know before starting your vehicle 65.

  • Page 68

    If the passenger seating position is equipped with an alr and is being used for normal usage, only pull the seat belt webbing out far enough to comfortably wrap around the occupant’s mid-section so as to not activate the alr. If the alr is activated, you will hear a clicking sound as the seat belt r...

  • Page 69

    How to disengage the automatic locking mode unbuckle the combination lap/shoulder belt and allow it to retract completely to disengage the automatic locking mode and activate the vehicle sensitive (emergency) locking mode. Warning! • the seat belt assembly must be replaced if the switchable automati...

  • Page 70

    • supplemental side air bags • front and side impact sensors — if equipped • seat belt pretenioners • seat belt buckle switch advanced front air bags this vehicle has advanced front air bags for both the driver and front passenger as a supplement to the seat belt restraint systems. The driver’s adva...

  • Page 71

    Warning! • being too close to the steering wheel or instrument panel during advanced front air bag deployment could cause serious injury, including death. Air bags need room to inflate. Sit back, comfortably extending your arms to reach the steering wheel or instrument panel. • never place a rear-fa...

  • Page 72

    Warning! • no objects should be placed over or near the air bag on the instrument panel or steering wheel, because any such objects could cause harm if the vehicle is in a collision severe enough to cause the air bags to inflate. • do not put anything on or around the air bag covers or attempt to op...

  • Page 73

    Because air bag sensors measure vehicle deceleration over time, vehicle speed and damage by themselves are not good indicators of whether or not an air bag should have deployed. Seat belts are necessary for your protection in all colli- sions, and also are needed to help keep you in position, away f...

  • Page 74

    Supplemental side air bags your vehicle is equipped with two types of side air bags: 1. Supplemental seat-mounted side air bags (sabs): located in the outboard side of the front seats. The sabs are marked with a “srs airbag” or “airbag” label sewn into the outboard side of the seats. The sabs may he...

  • Page 75

    2. Supplemental side air bag inflatable curtains (sabics): located above the side windows. The trim covering the sabics is labeled “srs airbag” or “airbag.” sabics may help reduce the risk of head injury to front and rear seat outboard occupants. Sabics may reduce the risk of injuries in certain sid...

  • Page 76

    Warning! • your vehicle is equipped with left and right supplemental side air bag inflatable curtains (sabics). Do not stack luggage or other cargo up high enough to block the deployment of the sabics. The trim covering above the side win- dows where the sabic and its deployment path are located sho...

  • Page 77

    Help keep you in position, away from inflating side air bags. To get the best protection from the side air bags, occupants must wear their seat belts properly and sit upright with their backs against the seats. Children must be properly restrained in a child restraint or booster seat that is appropr...

  • Page 78

    The side air bags will not deploy in all side collisions, including some collisions at certain angles, or some side collisions that do not impact the area of the passenger compartment. The side air bags may deploy during angled or offset frontal collisions where the advanced front air bags deploy. R...

  • Page 79

    Deploy and unfold. The abrasions are similar to fric- tion rope burns or those you might get sliding along a carpet or gymnasium floor. They are not caused by contact with chemicals. They are not permanent and normally heal quickly. However, if you haven’t healed significantly within a few days, or ...

  • Page 80

    Enhanced accident response system in the event of an impact, if the communication network remains intact, and the power remains intact, depending on the nature of the event, the orc will determine whether to have the enhanced accident response sys- tem perform the following functions: • cut off fuel...

  • Page 81

    The orc contains a backup power supply system that may deploy the air bags even if the battery loses power or it becomes disconnected prior to deployment. The orc turns on the air bag warning light in the instrument panel for approximately four to eight seconds for a self-check when the ignition swi...

  • Page 82

    Warning! Ignoring the air bag warning light in your instru- ment panel could mean you won’t have the air bags to protect you in a collision. If the light does not come on as a bulb check when the ignition is first placed in the on position, and stays on after you start the vehicle, or if it comes on...

  • Page 83

    Warning! (continued) not function properly if modifications are made. Take your vehicle to an authorized dealer for any air bag system service. If your seat, including your trim cover and cushion, needs to be serviced in any way (including removal or loosening/tightening of seat attachment bolts), t...

  • Page 84

    Note: edr data are recorded by your vehicle only if a non-trivial crash situation occurs; no data are recorded by the edr under normal driving conditions and no per- sonal data (e.G., name, gender, age, and crash location) are recorded. However, other parties, such as law en- forcement, could combin...

  • Page 85

    There are different sizes and types of restraints for children from newborn size to the child almost large enough for an adult safety belt. Always check the child seat owner’s manual to make sure you have the correct seat for your child. Carefully read and follow all the instructions and warnings in...

  • Page 86

    Summary of recommendations for restraining children in vehicles child size, height, weight or age recommended type of child restraint infants and toddlers children who are two years old or younger and who have not reached the height or weight limits of their child restraint either an infant carrier ...

  • Page 87

    Infants and child restraints safety experts recommend that children ride rear-facing in the vehicle until they are two years old or until they reach either the height or weight limit of their rear-facing child restraint. Two types of child restraints can be used rear-facing: infant carriers and conv...

  • Page 88

    Remain in a forward-facing child seat with a harness for as long as possible, up to the highest weight or height allowed by the child seat. All children whose weight or height is above the forward-facing limit for the child seat should use a belt-positioning booster seat until the vehicle’s seat bel...

  • Page 89

    Children too large for booster seats children who are large enough to wear the shoulder belt comfortably, and whose legs are long enough to bend over the front of the seat when their back is against the seatback, should use the seat belt in a rear seat. Use this simple 5-step test to decide whether ...

  • Page 90

    Recommendations for attaching child restraints restraint type combined weight of the child + child restraint use any attachment method shown with an “x” below latch – lower anchors only seat belt only latch – lower anchors + top tether anchor seat belt + top tether anchor rear-facing child restraint...

  • Page 91

    Lower anchors and tethers for children (latch) restraint system your vehicle is equipped with the child restraint anchor- age system called latch, which stands for lower anchors and tethers for children. The latch system has three vehicle anchor points for installing latch- equipped child seats. The...

  • Page 92

    Latch positions for installing child restraints in this vehicle regular cab • lower anchorage symbol – 2 anchorages per seating position • top tether anchorage symbol quad cab/crew cab split bench • lower anchorage symbol - 2 anchorages per seating position • top tether anchorage symbol 90 things to...

  • Page 93

    Quad cab/mega cab/crew cab full bench • lower anchorage symbol 2 anchorages per seating position • top tether anchorage symbol 2 things to know before starting your vehicle 91.

  • Page 94

    What is the weight limit (child’s weight + weight of the child re- straint) for using the latch an- chorage system to attach the child restraint? 65 lbs (29.5 kg) use the latch anchorage system until the combined weight of the child and the child restraint is 65 lbs (29.5 kg). Use the seat belt and ...

  • Page 95

    Latch anchorage? If the center position does not have dedicated latch lower anchor- ages, use the seat belt to install a child seat in the center position next to a child seat using the latch anchorages in an outboard position. Can the rear-facing child restraint touch the back of the front passen- ...

  • Page 96

    Locating latch anchorages the lower anchorages are round bars that are found at the rear of the seat cushion where it meets the seatback. They are just visible when you lean into the rear seat to install the child restraint. You will easily feel them if you run your finger along the gap between the ...

  • Page 97

    Locating tether anchorages regular cab models have tether strap anchor- ages behind the front center and right seats. Quad cab, mega cab and crew cab models have tether strap anchorages located behind each of the rear seats. 1 — tether strap hook 2 — tether strap to child restraint 3 — tether anchor...

  • Page 98

    Latch-compatible child restraint systems will be equipped with a rigid bar or a flexible strap on each side. Each will have a hook or connector to attach to the lower anchorage and a way to tighten the connection to the anchorage. Forward-facing child restraints and some rear-facing child restraints...

  • Page 99

    Center seat latch — quad cab®/mega cab®/crew cab split bench if a child restraint installed in the center position blocks the seat belt webbing or buckle for the outboard position, do not use that outboard position. If a child seat in the center position blocks the outboard latch anchors or seat bel...

  • Page 100

    3. Attach the lower hooks or connectors of the child restraint to the lower anchorages in the selected seat- ing position. 4. If the child restraint has a tether strap, connect it to the top tether anchorage. See the section “installing child restraints using the top tether anchorage” for direc- tio...

  • Page 101

    Warning! • improper installation of a child restraint to the latch anchorages can lead to failure of the re- straint. The child could be badly injured or killed. Follow the child restraint manufacturer’s directions exactly when installing an infant or child restraint. • child restraint anchorages ar...

  • Page 102

    Lap/shoulder belt systems for installing child restraints in this vehicle regular cab • alr = switchable automatic locking retractor • cinch = cinching latch plate • top tether anchorage symbol quad cab®/mega cab®/crew cab • alr = switchable automatic locking retractor • cinch = cinching latch plate...

  • Page 103

    Lap/shoulder belt systems what is the weight limit (child’s weight + weight of the child re- straint) for using the tether anchor with the seat belt to attach a forward facing child restraint? Weight limit of the child restraint always use the tether anchor when using the seat belt to install a for-...

  • Page 104

    Installing a child restraint with a switchable automatic locking retractor (alr) 1. Place the child seat in the center of the seating position. For some second row seats, you may need to recline the seat and/or raise the head restraint to get a better fit. If the rear seat can be moved forward and r...

  • Page 105

    9. Test that the child restraint is installed tightly by pulling back and forth on the child seat at the belt path. It should not move more than 1 inch (25.4 mm) in any direction. Any seat belt system will loosen with time, so check the belt occasionally, and pull it tight if necessary. Installing a...

  • Page 106

    Any seat belt system will loosen with time, so check the belt occasionally, and pull it tight if necessary. If the buckle or the cinching latch plate is too close to the belt path opening of the child restraint, you may have trouble tightening the seat belt. If this happens, disconnect the latch pla...

  • Page 107

    Regular and mega cab® trucks: in the regular cab truck, the top tether anchorages are located behind the center and right passenger seats. In the mega cab truck, the top tether anchorages are located behind each rear seating position. There is a plastic cover over each anchorage. To attach the tethe...

  • Page 108

    2. Route the tether strap to provide the most direct path between the anchorage and the child seat. The tether strap should go between the head restraint posts underneath the head restraint. You may need to adjust the head restraint to the upward position to pass the tether strap underneath the head...

  • Page 109

    Warning! Never place a rear-facing child restraint in front of an air bag. A deploying passenger advanced front air bag can cause death or serious injury to a child 12 years or younger, including a child in a rear-facing child restraint. Quad cab® or crew cab trucks: the top tether anchorages in thi...

  • Page 110

    2. Place a child restraint on the seat and adjust the tether strap so that it will reach over the seat back, under the head restraint, through the tether strap loop behind the seat and over to the tether strap loop behind the center seat. 3. Pass the tether strap hook under the head restraint behind...

  • Page 111

    4. Attach the hook to the center tether strap loop (see diagram). Tighten the tether strap according to the child seat manufacturer’s instructions. Note: if there are child seats in both of the outboard (left and right) seating positions, the tether strap hooks of both child seats should be connecte...

  • Page 112

    2. Place a child restraint on the seat and adjust the tether strap so that it will reach over the seat back, under the head restraint, through the tether strap loop behind the seat and over to the tether strap loop behind either the right or left outboard seat. 3. Pass the tether strap hook under th...

  • Page 113

    4. Attach the hook to the outboard tether strap loop (see diagram). Tighten the tether strap according to the child seat manufacturer’s instructions. Installing three child restraints: 1. Place a child restraint on each outboard rear seat. Route the tether straps following the directions for right a...

  • Page 114

    Warning! • an incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchorage position directly (continued) warning! (continued) behind the child seat to secure a child restraint top tether strap. • if your vehicle is equipped with a spl...

  • Page 115

    Engine break-in recommendations a long break-in period is not required for the engine and drivetrain (transmission and axle) in your vehicle. Drive moderately during the first 300 miles (500 km). After the initial 60 miles (100 km), speeds up to 50 or 55 mph (80 or 90 km/h) are desirable. While crui...

  • Page 116

    Safety tips transporting passengers never transport passengers in the cargo area. Warning! • do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death. • it is extremely dangerous to ride in a cargo area, inside or outside of a v...

  • Page 117

    Warning! (continued) • if it is necessary to sit in a parked vehicle with the engine running, adjust your heating or cooling controls to force outside air into the vehicle. Set the blower at high speed. The best protection against carbon monoxide entry into the vehicle body is a properly maintained ...

  • Page 118

    Air bag warning light the light should come on and remain on for four to eight seconds as a bulb check when the ignition switch is first turned on. If the light is not lit during starting, see your authorized dealer. If the light stays on, flickers, or comes on while driving, have the system checked...

  • Page 119

    Warning! (continued) • never put floor mats or other floor coverings on top of already installed floor mats. Additional floor mats and other coverings will reduce the size of the pedal area and interfere with the pedals. • check mounting of mats on a regular basis. Always properly reinstall and secu...

  • Page 120

    Fluid leaks check area under vehicle after overnight parking for fuel, engine coolant, oil, or other fluid leaks. Also, if gasoline fumes are detected or if fuel, power steering fluid (if equipped), or brake fluid leaks are suspected. The cause should be located and corrected immediately. 118 things...

  • Page 121: Contents

    Understanding the features of your vehicle contents 䡵 mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . .126 ▫ inside day/night mirror — if equipped . . . .126 ▫ automatic dimming mirror — if equipped . . .126 ▫ automatic dimming mirror with rear view camera display — if equipped . . . ....

  • Page 122

    ▫ passenger’s power seat — if equipped . . . . . .144 ▫ power lumbar — if equipped . . . . . . . . . . . .145 ▫ heated seats — if equipped . . . . . . . . . . . . . .145 ▫ ventilated seats — if equipped . . . . . . . . . . . .148 ▫ manual seat adjuster — if equipped. . . . . . . .149 ▫ 40-20-40 fron...

  • Page 123

    ▫ lights-on reminder . . . . . . . . . . . . . . . . . . .171 ▫ battery saver. . . . . . . . . . . . . . . . . . . . . . . . .171 ▫ interior lights . . . . . . . . . . . . . . . . . . . . . . .171 ▫ cargo light . . . . . . . . . . . . . . . . . . . . . . . . .174 ▫ multifunction lever . . . . . . . ...

  • Page 124

    ▫ to accelerate for passing . . . . . . . . . . . . . . . .188 䡵 parksense® rear park assist — if equipped . . . . . . . . . . . . . . . . . . . . . . . . . . .189 ▫ parksense® sensors . . . . . . . . . . . . . . . . . . . .190 ▫ parksense® warning display . . . . . . . . . . . . .190 ▫ parksense® d...

  • Page 125

    ▫ programming a non-rolling code . . . . . . . . .215 ▫ canadian/gate operator programming . . . . .217 ▫ using homelink® . . . . . . . . . . . . . . . . . . . .218 ▫ security . . . . . . . . . . . . . . . . . . . . . . . . . . . .218 ▫ troubleshooting tips . . . . . . . . . . . . . . . . . . .219 ▫...

  • Page 126

    䡵 storage . . . . . . . . . . . . . . . . . . . . . . . . . . . .234 ▫ glove compartment . . . . . . . . . . . . . . . . . . .234 ▫ door storage. . . . . . . . . . . . . . . . . . . . . . . . .236 ▫ center storage compartment — if equipped . .237 ▫ second row in-floor storage bin — if equipped . . ....

  • Page 127

    䡵 slide-in campers . . . . . . . . . . . . . . . . . . . .264 ▫ camper applications . . . . . . . . . . . . . . . . . . .264 䡵 easy-off tailgate . . . . . . . . . . . . . . . . . . .265 ▫ disconnecting the rear camera or remote keyless entry — if equipped . . . . . . . . . . . . .265 ▫ removing the ...

  • Page 128

    Mirrors inside day/night mirror — if equipped a single ball joint mirror is provided in the vehicle. It is a twist on mirror that has a fixed position at the wind- shield. The mirror installs on the windshield button with a counterclockwise rotation and requires no tools for mounting. The mirror hea...

  • Page 129

    Left, and right for various drivers. The mirror should be adjusted to center on the view through the rear window. This mirror automatically adjusts for headlight glare from vehicles behind you. Note: the automatic dimming mirror feature is dis- abled when the vehicle is in reverse gear to improve re...

  • Page 130

    Note: the assist and 9–1–1 features operate through the uconnect® access service. These buttons will only operate as long as your uconnect® access service is active. Refer to your “uconnect® system supplement manual” for further information. Assist call the assist button is used to automatically con...

  • Page 131

    3. Once a connection between the vehicle and a 9-1-1 operator is made, the 9-1-1 call system may transmit the following important vehicle information to a 9-1-1 operator: • indication that the occupant placed a 9-1-1 call. • the vehicle brand. • the last known gps coordinates of the vehicle. 4. You ...

  • Page 132

    Warning! • if anyone in the vehicle could be in danger (e.G., fire or smoke is visible, dangerous road conditions or location), do not wait for voice contact from a 9-1-1 operator. All occupants should exit the vehicle immediately and move to a safe location. • never place anything on or near the ve...

  • Page 133

    9-1-1 call system limitations vehicles sold in canada and mexico do not have 9-1-1 call system capabilities. 9-1-1 or other emergency line operators in canada and mexico may not answer or respond to 9-1-1 system calls. If the 9-1-1 call system detects a malfunction, any of the following may occur at...

  • Page 134

    Even if the 9-1-1 call system is fully functional, factors beyond fca us llc’s control may prevent or stop the 9-1-1 call system operation. These include, but are not limited to, the following factors: • delayed accessories mode is active. • the ignition is in the off position. • the vehicle’s elect...

  • Page 135

    Note: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Caution! To avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror. Apply the solution onto a clean ...

  • Page 136

    Outside mirrors to receive maximum benefit, adjust the outside mirrors to center on the adjacent lane of traffic with a slight overlap of the view obtained on the inside mirror. Note: if your vehicle is equipped with illuminated approach lights under the outside mirrors they can be turned off throug...

  • Page 137

    Outside mirrors folding feature all outside mirrors are designed to be able to be manu- ally folded both forward and rearward to prevent dam- age. Caution! It is recommended to fold the mirrors into the full rearward position to resist damage when entering a car wash or a narrow location. Tilt mirro...

  • Page 138

    If your vehicle is equipped with a touchscreen, this feature can be programmed through the uconnect® system. Refer to “uconnect® settings” in “understand- ing your instrument panel” for further information. If your vehicle is not equipped with a touchscreen, this feature can be programmed through th...

  • Page 139

    Resetting the power folding outside mirrors you may need to reset the power folding mirrors if the following occurs: • the mirrors are accidentally blocked while folding. • the mirrors are accidentally manually folded/unfolded. • the mirrors come out of the unfolded position. • the mirrors shake and...

  • Page 140

    Power mirrors — if equipped the controls for the power mirrors are located on the driver’s door trim panel. The power mirror controls consist of mirror select but- tons and a four-way mirror control switch. To adjust a mirror, push either the l (left) or r (right) button to select the mirror that yo...

  • Page 141

    Using the mirror control switch, push on any of the four arrows for the direction that you want the mirror to move. Heated mirrors — if equipped these mirrors are heated to melt frost or ice. This feature can be activated whenever you turn on the rear window defroster (if equipped). Refer to “rear w...

  • Page 142

    Trailer towing mirrors — if equipped these mirrors are designed with an adjustable mirror head to provide a greater vision range when towing extra-wide loads. To change position inboard or out- board, the mirror head should be rotated (flipped in or out). Note: fold the trailer towing mirrors rearwa...

  • Page 143

    Illuminated vanity mirror — if equipped illuminated vanity mirrors are located on each sun visor. To use the mirror, rotate the sun visor down and swing the mirror cover upward. The lights will turn on auto- matically. Closing the mirror cover turns off the light. “slide-on-rod” features of sun viso...

  • Page 144

    Seats seats are a part of the occupant restraint system of the vehicle. Warning! • it is dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. • do not allow people to ride in any area of you...

  • Page 145

    Adjusting the seat forward or rearward the seat can be adjusted both forward and rearward. Push the seat switch forward or rearward. The seat will move in the direction of the switch. Release the switch when the desired position has been reached. Adjusting the seat up or down the height of the seats...

  • Page 146

    The seat will move in the direction of the switch. Release the switch when the desired position is reached. Warning! • adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • seats shoul...

  • Page 147

    Power lumbar — if equipped vehicles equipped with power driver or passenger seats may be also be equipped with power lumbar. The power lumbar switch is located on the outboard side of the power seat. Push the switch forward to increase the lumbar support. Push the switch rearward to decrease the lum...

  • Page 148

    Warning! (continued) • do not place anything on the seat or seatback that insulates against heat, such as a blanket or cushion. This may cause the seat heater to overheat. Sitting in a seat that has been overheated could cause serious burns due to the increased surface tempera- ture of the seat. Fro...

  • Page 149

    Vehicles equipped with remote start on models that are equipped with remote start, the heated seats can be programed to come on during a remote start. If your vehicle is equipped with a touchscreen, this feature can be programmed through the uconnect® system. Refer to “uconnect® settings” in “unders...

  • Page 150

    • the engine must be running for the heated seats to operate. When the hi-level setting is selected, the heater will provide a boosted heat level during the first four minutes of operation. Then, the heat output will drop to the normal hi-level. If the hi-level setting is selected, the system will a...

  • Page 151

    If your vehicle is equipped with a touchscreen, this feature can be programmed through the uconnect® system. Refer to “uconnect® settings” in “understand- ing your instrument panel” for further information. If your vehicle is not equipped with a touchscreen, this feature can be programmed through th...

  • Page 152

    Warning! • adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • seats should be adjusted before fastening the seat belts and while the vehicle is parked. Serious injury or death could...

  • Page 153

    Mega cab® rear seat features reclining rear seats — if equipped the recliner handle is located on the outside of the seat cushion. To adjust the seatback, lift upward on the handle, lean back on the seatback and when you reach the desired position, release the handle. Warning! Do not ride with the s...

  • Page 154

    Folding rear seat (table mode) — if equipped both the left and right rear seatbacks can be folded down and used as a table. To fold down either rear seatback: 1. Lift the handle, located next to the head restraint. 2. Fold the seatback forward. 3. Lift the seatback, to return the seat to the upright...

  • Page 155

    Folding rear seat — if equipped both the outboard rear seats will drop and move forward when the seatback is folded flat. Warning! • it is dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed...

  • Page 156

    3. Lift the seatback, to return the seat to the upright position. Be sure the seat is locked in place. Warning! An improperly latched seat could cause serious in- jury or death. Make sure that the seatback is securely locked into position. If the seatback in not securely locked into position the sea...

  • Page 157

    Warning! The head restraints for all occupants must be prop- erly installed and adjusted prior to operating the vehicle or occupying a seat. Head restraints should never be adjusted while the vehicle is in motion. Driving a vehicle with the head restraints improperly adjusted or removed could cause ...

  • Page 158

    Warning! • a loose head restraint thrown forward in a colli- sion or hard stop could cause serious injury or death to occupants of the vehicle. Always securely stow removed head restraints in a location outside the occupant compartment. • all the head restraints must be reinstalled in the vehicle to...

  • Page 159

    Note: • the rear center head restraint (crew cab and quad cab) has only one adjustment position that is used to aid in the routing of a tether. Refer to “occupant restraints” in “things to know before starting your vehicle” for further information. • do not reposition the head restraint 180 degrees ...

  • Page 160

    Driver memory seat — if equipped this feature allows the driver to store up to two different memory profiles for easy recall through a memory switch. Each memory profile contains desired position settings for the driver seat, side mirrors, adjustable pedals (if equipped) and a set of desired radio s...

  • Page 161

    2. Adjust all memory profile settings to desired prefer- ences (seat, side mirrors, adjustable pedals and radio station presets). 3. Push and release the s (set) button on the memory switch. 4. Within five seconds, push and release either of the memory buttons (1) or (2). The electronic vehicle info...

  • Page 162

    “driver information display (did)” in “understand- ing your instrument panel” for further information. To program your rke transmitters, perform the follow- ing: 1. Cycle the vehicles ignition to the off position. 2. Select desired memory profile (1) or (2). Note: if a memory profile has not already...

  • Page 163

    Driver one memory position recall • to recall the memory settings for driver one using the memory switch, push memory button number 1 on the memory switch. • to recall the memory settings for driver one using the rke transmitter, push the unlock button on the rke transmitter linked to memory positio...

  • Page 164

    Forward of the rear stop. The seat will return to its previously set position when you place the ignition into the acc or run position. • when you remove the key fob from the ignition (or change the ignition to off, for vehicles equipped with keyless enter-n-go™), the driver seat will move to a posi...

  • Page 165

    To open and close the hood to open the hood, two latches must be released. 1. Pull the hood release lever located below the steering wheel at the base of the instrument panel. 2. Reach into the opening beneath the center of the hood and push the safety latch lever to the left to release it, before r...

  • Page 166

    Caution! To prevent possible damage, do not slam the hood to close it. Use a firm downward push at the front center of the hood to ensure that both latches engage. Warning! Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open when the vehicle...

  • Page 167

    Your vehicle is equipped with plastic headlight and fog light (if equipped) lenses that are lighter and less suscep- tible to stone breakage than glass lights. Plastic is not as scratch resistant as glass and therefore different lens cleaning procedures must be followed. To minimize the possibility ...

  • Page 168

    Automatic headlights — if equipped this system automatically turns the headlights on or off according to ambient light levels. To turn the system on, rotate the headlight switch to the auto position. When the system is on, the headlight delay feature is also on. This means the headlights will stay o...

  • Page 169

    If your vehicle is not equipped with a touchscreen, this feature can be programmed through the electronic ve- hicle information center (evic) or driver information display (did). Refer to “electronic vehicle information center (evic)” or “driver information display (did)” in “understanding your inst...

  • Page 170

    Automatic high beam headlamp control — if equipped the automatic high beam headlamp control system provides increased forward lighting at night by automat- ing high beam control through the use of a digital camera mounted on the inside rearview mirror. This camera detects vehicle specific light and ...

  • Page 171

    If the windshield or automatic high beam headlamp control mirror is replaced, the mirror must be re-aimed to ensure proper performance. See your local authorized dealer. To activate 1. If your vehicle is equipped with a touchscreen, the automatic high beams are enabled through the uconnect® system. ...

  • Page 172

    Parking lights and panel lights to turn on the parking lights and instrument panel lights, rotate the headlight switch clockwise. To turn off the parking lights, rotate the headlight switch back to the o (off) position. Fog lights — if equipped the fog lights are turned on by rotating the headlight ...

  • Page 173

    Turn off when the switch is pushed a second time, when the headlight switch is rotated to the off position, or the high beam is selected. Lights-on reminder if the headlights, parking lights, or cargo lights are left on after the ignition is turned off, a chime will sound when the driver’s door is o...

  • Page 174

    The brightness of the instrument panel as well as the ambient lighting can be regulated by rotating the dimmer control right (brighter) or left (dimmer). When the head- lights are on you can supplement the brightness of the odometer, trip odometer, radio and overhead console by rotating the control ...

  • Page 175

    (rke) transmitter, if equipped. These lights are also operated individually as reading lights by pushing on the corresponding lens. Note: the courtesy/reading lights will remain on until the switch is pushed a second time, so be sure they have been turned off before leaving the vehicle. If the inter...

  • Page 176

    Ambient light the overhead console is equipped with an ambient light feature. This light casts illumination for improved visibil- ity of the floor console area. Cargo light the cargo light is turned on by pushing on the cargo light button. The cargo light will also turn on for approximately 30 secon...

  • Page 177

    Multifunction lever the multifunction lever is located on the left side of the steering column. Turn signals move the multifunction lever up or down and the arrows on each side of the instrument cluster flash to show proper operation of the front and rear turn signal lights. Note: if either light re...

  • Page 178

    Lane change assist tap the lever up or down once, without moving beyond the detent, and the turn signal (right or left) will flash three times then automatically turn off. Flash-to-pass you can signal another vehicle with your headlights by partially pulling the multifunction lever toward the steer-...

  • Page 179

    Windshield wipers and washers windshield wipers the wipers and washers are operated by a switch in the multifunction lever. Turn the end of the handle to select the desired wiper speed. Windshield wiper operation rotate the end of the lever upward, to the first detent past the intermittent settings ...

  • Page 180

    Windshield washers to use the windshield washer, push the washer knob, located on the end of the multifunction lever, inward to the second detent. Washer fluid will be sprayed and the wiper will operate for two to three cycles after the washer knob is released from this position. If the washer knob ...

  • Page 181

    Note: the mist feature does not activate the washer pump; therefore, no washer fluid will be sprayed on the windshield. The wash function must be used in order to spray the windshield with washer fluid. Rain sensing wipers — if equipped this feature senses moisture on the windshield and automaticall...

  • Page 182

    Note: • the rain sensing feature will not operate when the wiper switch is in the low or high-speed position. • the rain sensing feature may not function properly when ice, or dried salt water is present on the wind- shield. • use of rain-x® or products containing wax or silicone may reduce rain sen...

  • Page 183

    Pull the lever toward the steering wheel to unlock the steering column. With one hand firmly on the steering wheel, move the steering column up or down, as desired. Release the lever to lock the steering column firmly in place. Warning! Do not adjust the steering column while driving. Adjusting the ...

  • Page 184

    The heated steering wheel control button is located on the center of the instrument panel below the climate controls. If your vehicle is equipped with a touchscreen, the heated steering wheel control button is located within the cli- mate or controls screen of the touchscreen. • press the heated ste...

  • Page 185

    Warning! • persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaus- tion, or other physical conditions must exercise care when using the steering wheel heater. It may cause burns even at low temperatures,...

  • Page 186

    • the pedals cannot be adjusted when the vehicle is in reverse or when the electronic speed control sys- tem is on. The following messages will be displayed on vehicles equipped with the electronic vehicle informa- tion system (evic) or driver information display (did) if the pedals are attempted to...

  • Page 187

    Electronic speed control when engaged, the electronic speed control takes over accelerator operations at speeds greater than 25 mph (40 km/h). The electronic speed control buttons are located on the right side of the steering wheel. Electronic speed control switches 1 — on/off 3 — set - 2 — res + 4 ...

  • Page 188

    Note: in order to ensure proper operation, the elec- tronic speed control system has been designed to shut down if multiple speed control functions are operated at the same time. If this occurs, the electronic speed control system can be reactivated by pushing the electronic speed control on/off but...

  • Page 189

    To deactivate a soft tap on the brake pedal, pushing the cancel button, or normal brake pressure while slowing the vehicle will deactivate the electronic speed control with- out erasing the set speed from memory. Pushing the on/off button or turning the ignition switch off erases the set speed from ...

  • Page 190

    • if the button is continually pushed, the set speed will continue to increase until the button is released, then the new set speed will be established. To decrease speed when the electronic speed control is set, you can de- crease speed by pushing the set (-) button. The drivers preferred units can...

  • Page 191

    Note: the electronic speed control system maintains speed up and down hills. A slight speed change on moderate hills is normal. On steep hills, a greater speed loss or gain may occur so it may be preferable to drive without electronic speed control. Warning! Electronic speed control can be dangerous...

  • Page 192

    (evic) or driver information display (did) indicating the vehicle speed is too fast. The system will become active again if the vehicle speed is decreased to speeds less than approximately 6 mph (9 km/h). Parksense® sensors the four parksense® sensors, located in the rear fascia/ bumper, monitor the...

  • Page 193

    Parksense® display when the vehicle is in reverse, the warning display will turn on indicating the system status. The system will indicate a detected obstacle by showing a single arc in the left and/or right rear regions based on the object’s distance and location relative to the vehicle. If an obje...

  • Page 194

    Slow tone fast tone 192 understanding the features of your vehicle.

  • Page 195

    The vehicle is close to the obstacle when the warning display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert opera- tion when the system is detecting an obstacle: warning alerts rear distance (in/cm) greater than 79 in (200 cm) 79-45 in (200-115 cm) ...

  • Page 196

    Chime second tone arc none 4th solid 3rd solid 2nd flashing 1st flashing radio volume reduced no yes yes yes yes note: parksense® will reduce the volume of the radio, if on, when the system is sounding an audio tone. Adjustable chime volume settings the rear chime volume settings are programmable. •...

  • Page 197

    Approximately five seconds. Refer to “electronic vehicle information center (evic) or driver information display (did)” in “understanding your instrument panel” for further information. When the shift lever is moved to reverse and the system is disabled, the evic/did will display the “parksense off”...

  • Page 198

    If ⬙parksense unavailable wipe rear sensors⬙ appears in the electronic vehicle information center (evic) or driver information display (did) make sure the outer surface and the underside of the rear fascia/ bumper is clean and clear of snow, ice, mud, dirt or other obstruction, and then cycle the ig...

  • Page 199

    • parksense®, when on, will reduce the volume of the radio when it is sounding a tone. • clean the parksense® sensors regularly, taking care not to scratch or damage them. The sensors must not be covered with ice, snow, slush, mud, dirt or debris. Failure to do so can result in the system not workin...

  • Page 200

    Warning! • drivers must be careful when backing up even when using parksense®. Always check carefully behind your vehicle, look behind you, and be sure to check for pedestrians, animals, other vehicles, obstructions, and blind spots before backing up. You are responsible for safety and must continue...

  • Page 201

    Parksense® can be active only when the shift lever is in reverse or drive. If parksense® is enabled at one of these shift lever positions, the system will remain active until the vehicle speed is increased to approximately 7 mph (11 km/h) or above. A display warning will appear in the electronic veh...

  • Page 202

    Driver information display (did) settings” in under- standing your instrument panel” for further information. The parksense® warning screen will only be displayed if sound and display is selected. Note: if your vehicle is equipped with a touchscreen, this feature can be programmed through the uconne...

  • Page 203

    The vehicle is close to the obstacle when the display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert operation when the system is detecting an obstacle: warning alerts rear distance (in/cm) greater than 79 in (200 cm) 79-45 in (200-115 cm) 45-31 in (...

  • Page 204

    Front park assist audible alerts parksense® will turn off the front park assist audible alert (chime) after approximately three seconds when an obstacle has been detected, the vehicle is stationary, and brake pedal is applied. Adjustable chime volume settings the front and rear chime volume settings...

  • Page 205

    When the shift lever is moved to reverse and the front or rear system is disabled, the evic/did will display the ⬙front parksense off⬙ or ⬙rear parksense off⬙ message for five seconds, followed by a car graphic with ⬙off⬙ in the corresponding side. This car graphic will be displayed for as long as t...

  • Page 206

    Arc alerts for the side that is functioning properly. These arc alerts will interrupt the ⬙parksense unavail- able wipe rear sensors ⬙, ⬙parksense unavail- able wipe front sensors ⬙, or ⬙parksense un- available service required ⬙ messages if an object is detected within the five second pop-up durati...

  • Page 207

    • when you turn front or rear parksense® off, the instrument cluster will display “front parksense off” or “rear parksense off.” furthermore, once you turn front or rear parksense® off, it remains off until you turn it on again, even if you cycle the ignition key. • when you move the shift lever to ...

  • Page 208

    Caution! • parksense® is only a parking aid and it is unable to recognize every obstacle, including small obstacles. Parking curbs might be temporarily detected or not detected at all. Obstacles located above or below the sensors will not be detected when they are in close proximity. • the vehicle m...

  • Page 209

    Parkview® rear back up camera — if equipped your vehicle may be equipped with the parkview® rear back up camera that allows you to see a image of the rear surroundings of your vehicle whenever the shift lever is put into reverse. The image will be displayed in the rearview mirror display (if equippe...

  • Page 210

    The following table shows the approximate distances for each zone: zones distance to the rear of the vehicle red 0 - 1 ft (0 - 30 cm) yellow 1 ft - 6.5 ft (30 cm - 2m) green 6.5 ft or greater (2 m or greater) warning! Drivers must be careful when backing up even when using the parkview® rear back up...

  • Page 211

    Overhead console — if equipped the overhead console is located on the headliner above the review mirror. The overhead console contains the following features: • courtesy/reading lights • power sunroof switch — if equipped • power sliding rear window switch — if equipped • universal garage door opene...

  • Page 212

    (rke) transmitter, if equipped. These lights are also operated individually as reading lights by pushing on the corresponding lens. Note: the courtesy/reading lights will remain on until the switch is pushed a second time, so be sure they have been turned off before leaving the vehicle. If the inter...

  • Page 213

    Garage door opener — if equipped homelink® replaces up to three hand-held transmitters that operate devices such as garage door openers, motor- ized gates, lighting or home security systems. The homelink® unit is powered by your vehicles 12 volt battery. The homelink® buttons that are located in the...

  • Page 214

    Warning! • your motorized door or gate will open and close while you are training the universal transceiver. Do not train the transceiver if people, pets or other objects are in the path of the door or gate. Only use this transceiver with a garage door opener that has a “stop and reverse” feature as...

  • Page 215

    To erase the channels place the ignition in the on/run position and push and hold the two outside homelink® buttons (i and iii) for up to 20 seconds. The electronic vehicle information center (evic), or driver interactive display (did) will display “clearing channels.” release the buttons when the e...

  • Page 216

    1. Turn the ignition switch to the on/run position. For vehicle’s equipped with keyless enter-n-go™, place the ignition in the run position with the engine on. 2. Place the hand - held transmitter 1 to 3 inches (3 to 8 cm) away from the homelink® button you wish to program. 3. Push and hold the home...

  • Page 217

    Attached to the garage door opener/device motor. Firmly push and release the “learn” or “train- ing” button. On some garage door openers/devices there may be a light that blinks when the garage door opener/device is in the learn/train mode. Note: you have 30 seconds in which to initiate the next ste...

  • Page 218

    1. Turn the ignition switch to the on/run position. 2. Place the hand - held transmitter 1 to 3 inches (3 to 8 cm) away from the homelink® button you wish to program. 3. Push and hold the homelink® button you want to program while you push and hold the hand - held transmitter button. 4. Continue to ...

  • Page 219

    3. Without releasing the button proceed with “program- ming a non-rolling code” step 2 and follow all remaining steps. Canadian/gate operator programming for programming transmitters in canada/united states that require the transmitter signals to “time-out” after several seconds of transmission. Can...

  • Page 220

    5. Push and hold the programmed homelink® button. The evic/did will display “channel # trans- mit.” if the device is plugged in and activates, pro- gramming is complete. If you unplugged the garage door opener/device for programming, plug it back in at this time. Reprogramming a single homelink® but...

  • Page 221

    Interactive display (did) will display “clearing channels.” release the buttons when the evic/did displays “channels cleared.” the homelink® universal transceiver is disabled when the vehicle security alarm is active. Troubleshooting tips if you are having trouble programming homelink®, here are som...

  • Page 222

    Warning! (continued) after 1982. Do not use a garage door opener without these safety features. Call toll-free 800-355-3515 or, on the internet at homelink.Com for safety infor- mation or assistance. General information this device complies with fcc rules part 15 and industry canada rss-210. Operati...

  • Page 223

    Warning! • never leave children unattended in a vehicle, or with access to an unlocked vehicle. Never leave the key fob in or near the vehicle, or in a location (continued) warning! (continued) accessible to children. Do not leave the ignition of a vehicle equipped with keyless enter-n-go™ in the ac...

  • Page 224

    Opening sunroof — manual mode to open the sunroof, push and hold the switch rearward to full open. Any release of the switch will stop the movement. The sunroof and sunshade will remain in a partially opened condition until the switch is pushed and held rearward again. Closing sunroof — manual mode ...

  • Page 225

    Note: if three consecutive sunroof close attempts result in pinch protect reversals, the fourth close attempt will be a manual close movement with pinch protect disabled. Push and hold close switch to fully close sunroof. Venting sunroof — express push and release the vent button within one half sec...

  • Page 226

    Ignition off operation the power sunroof switch will remain active for up to approximately ten minutes after the ignition switch is turned to the lock position. Opening either front door will cancel this feature. Note: ignition off time is programmable through the uconnect® system. Refer to “uconnec...

  • Page 227

    The auxiliary power outlets can be found in the following locations: caution! • do not exceed the maximum power of 160 watts (13 amps) at 12 volts. If the 160 watts (13 amps) power rating is exceeded, the fuse protecting the system will need to be replaced. • power outlets are designed for accessory...

  • Page 228

    • center console when equipped with bucket seats. • inside the upper lid of the center storage compartment — if equipped. Power outlet — center console power outlet — upper lid 226 understanding the features of your vehicle.

  • Page 229

    • rear of the center console storage compartment — quad cab® or crew cab. Power outlet — rear center console power outlet — rear center console fuse 3 understanding the features of your vehicle 227.

  • Page 230

    The key symbol indicates that this outlet can supply power when the key is in the on/run or acc posi- tions. All accessories connected to the outlet(s) should be removed or turned off when the vehicle is not in use to protect the battery against discharge. Warning! To avoid serious injury or death: ...

  • Page 231

    Caution! • many accessories that can be plugged in draw power from the vehicle’s battery, even when not in use (i.E., cellular phones, etc.). Eventually, if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent the engine from starting. • ac...

  • Page 232

    Power inverter — if equipped a 115 volt (150 watts maximum) outlet is located on the center stack of the instrument panel, to the right of the radio. This outlet can power cellular phones, electronics and other low power devices requiring power up to 150 watts. Certain high-end video games, such as ...

  • Page 233

    To turn on the power outlet, simply plug in the device. The outlet automatically turns off when the device is unplugged. Note: due to built-in overload protection, the power inverter will shut down if the power rating is exceeded. Warning! To avoid serious injury or death: • do not insert any object...

  • Page 234

    You have the ability to configure the functionality of the auxiliary switches via the electronic vehicle information center (evic) or driver information display (did). All switches can now be configured for setting the switch type operation to latching or momentary, power source of either battery or...

  • Page 235

    Front instrument panel cupholders — floor mounted shifter for vehicles equipped with bucket seats there are two cupholders located in the floor console. Rear cupholders — if equipped some vehicles are equipped with rear cupholders located in the center armrest. Some vehicles may be equipped with a r...

  • Page 236

    Storage glove compartment the glove compartment is located on the passenger side of the instrument panel and features both an upper and lower storage area. Rear cup wells glove compartment 1 — upper glove compartment 2 — lower glove compartment 234 understanding the features of your vehicle.

  • Page 237

    To open the upper glove compartment push upward on the handle release. The glove compartment door will automatically open. To open the lower glove compartment, pull on the handle to release the latch and lower the glove compartment door. Upper glove compartment lower glove compartment 3 understandin...

  • Page 238

    Door storage front door storage — if equipped storage areas and bottle holders (drivers side only) are located in the door trim panels. Rear door storage — if equipped storage compartments are located in both the driver and passenger rear door trim panels. Front door storage rear door storage 236 un...

  • Page 239

    Center storage compartment — if equipped the center storage compartment is located between the driver and passenger seats. The storage compartment provides an armrest and contains both and upper and lower storage area. Warning! • this armrest is not a seat. Anyone seated on the armrest could be seri...

  • Page 240

    With the upper lid closed, pull on the lower handle to open the lower storage bin. Warning! Do not operate this vehicle with a console compart- ment lid in the open position. Driving with the console compartment lid open may result in injury in a collision. Upper storage compartment lower storage bi...

  • Page 241

    Second row in-floor storage bin — if equipped in-floor storage bins are located in front of the second row seats and can be used for extra storage. The storage bins have removable liners that can be easily removed for cleaning. To open in-floor storage bin, lift upward on the handle of the latch and...

  • Page 242

    Seatback storage located in the back of both the driver and passenger front seats are pockets that can be used for storage. Storage (regular cab) the storage bin is located behind the front seats and runs the length of the cab. Drivers side seatback storage storage bin 240 understanding the features...

  • Page 243

    Storage and seats (crew cab) the crew cab models provide additional storage under the rear seats. Lift the seats to access the storage com- partment. To open the storage compartments, lift upward on the handle of the latch and open the lid. Caution! Always lift the storage compartment lids by using ...

  • Page 244

    Plastic grocery bag retainers (regular cab models) retainer hooks which will hold plastic grocery bag handles are built into the back panel of the cab, behind the rear seat. Rear window features rear window defroster the rear window defroster button is located on the climate control panel. Push this...

  • Page 245

    Caution! Failure to follow these cautions can cause damage to the heating elements: • use care when washing the inside of the rear window. Do not use abrasive window cleaners on the interior surface of the window. Use a soft cloth and a mild washing solution, wiping parallel to the heating elements....

  • Page 246

    Manual sliding rear window — if equipped a locking device in the center of the window helps to prevent entry from the rear of the vehicle. Squeeze the lock to release the window. Fold flat load floor — if equipped quad cab® and crew cab models with a 60/40 rear seat may be equipped with a folding lo...

  • Page 247

    2. Grasp the knob on the load floor and lift the knob until the load floor unfolds into position. 3. Reverse the procedure to store the load floor. Unfolding the load floor/crew cab® 1. Lift the 60/40 seat cushion(s) to the upward position. Load floor in open position load floor legs in stowed posit...

  • Page 248

    2. Unfold both the legs using the straps. 3. Lift the front panel until the load floor unfolds into position. 4. Reverse the procedure to store the load floor. Load floor legs in opened position load floor in open position 246 understanding the features of your vehicle.

  • Page 249

    Positioning the load floor for storage access under the seat 1. Lift the 60/40 seat cushion(s) to the upward position. 2. Unsnap the securing snap located at either side of the load floor. 3. Lift the load floor up to access storage under the load floor. Warning! Do not drive with the load floor in ...

  • Page 250

    Crew cab® — if equipped 4. Reverse the procedure to put the load floor back in the secured down position before you operate the vehicle. Pickup box the pickup box has many features designed for utility and convenience. Load floor securing straps/crew cab® pick up box features 1 — upper load floor in...

  • Page 251

    Note: if you are installing a toolbox, ladder rack or headache rack at the front of the pickup box, you must use mopar box reinforcement brackets that are available from your authorized dealer. You can carry wide building materials (sheets of ply- wood, etc.) by building a raised load floor. Place l...

  • Page 252

    There are stampings in the sheet metal on the inner side bulkheads of the box in front of and behind both wheel housings. Place wooden boards across the box from side to side to create separate load compartments in the pickup box. There are four tie-down cleats bolted to the lower sides of the picku...

  • Page 253

    Note: the cargo camera image may be deactivated by pressing the uconnect® display. The previous selected screen will appear. Rambox® — if equipped the rambox® system is an integrated pickup box stor- age and cargo management system consisting of three features: • integrated box side storage bins • c...

  • Page 254

    Caution! Failure to follow the following items could cause damage to the vehicle: • assure that all cargo inside the storage bins is properly secured. • do not exceed cargo weight rating of 150 lb (68 kg) 1500 series vehicles or 300 lbs (136 kg) for 2500 and 3500 series vehicles per bin. To open a s...

  • Page 255

    The interior of the rambox® will automatically illumi- nate when the lid is opened. In addition to the automatic illumination switch, there is a manual on/off switch located at the rear of each storage bin. Pushing the switch once will turn off the bin lights, pushing the switch again will turn the ...

  • Page 256

    Locking and unlocking rambox® push and release the lock or unlock button on the rke transmitter to lock and unlock all doors, the tailgate and the rambox® (if equipped). Refer to “remote key- less entry” for further details. The rambox® storage bins can be locked using the vehicle key. To lock and u...

  • Page 257

    Rambox® safety warning carefully follow these warnings to help prevent personal injury or damage to your vehicle: warning! • always close the storage bin covers when your vehicle is unattended. • do not allow children to have access to the storage bins. Once in the storage bin, young children may no...

  • Page 258

    Note: in the event of an individual being locked inside the storage bin, the storage bin cover can be opened from inside of the bin by pulling on the glow-in-the-dark lever attached to the storage bin cover latching mechanism. Bed extender — if equipped the bed extender has three functional position...

  • Page 259

    2. With the side gates open, position the extender fully forward in the bed against the front panel. 3. Rotate the side gates closed allowing the outboard ends to be positioned in front of the cargo tie down loops. Storage position cargo tie down loop 3 understanding the features of your vehicle 257.

  • Page 260

    4. Rotate the center handle horizontally to secure the side gates in the closed position. 5. Lock the center handle using the vehicle key to secure the panel into place. Divider position the divider position is intended for managing your cargo and assisting in keeping cargo from moving around the be...

  • Page 261

    2. With the side gates open, position the extender so the outboard ends align with the intended slots in the sides of the bed. 3. Rotate the side gates closed so that the outboard ends are secured into the intended slots of the bed. 4. Rotate the center handle horizontally to secure the side gates i...

  • Page 262

    5. Lock the center handle to secure the panel into place. Extender position the extender position allows you to load the bed of the truck beyond the tail gate. The bed extender will add an additional 15 in (38 cm) in the back of the truck when additional cargo room is needed. The extender position u...

  • Page 263

    2. Make sure the center handle is unlocked and rotate the center handle vertically in order to release the ex- tender side gates. 3. Fit the end of the side gate ends onto the pin and handle. 4. Rotate the handles to the horizontal position to secure into place. Extender installation locking tab 3 u...

  • Page 264

    Warning! To reduce the risk of potential injury or property damage: • cargo must be secured. • do not exceed cargo load rating of your vehicle. • secure all loads to truck utilizing cargo tie downs. • extender should not be used as cargo tie down. • when vehicle is in motion do not exceed 150 lbs (6...

  • Page 265

    Each cleat must be located and tightened down in one of the detents, along either rail, in order to keep cargo properly secure. To move the cleat to any position on the rail, turn the nut counterclockwise, approximately three turns. Then pull out on the cleat and slide it to the detent nearest the d...

  • Page 266

    To remove the cleats from the utility rail, remove the end cap screw located in the center of the end cap, using a #t30 torx® head driver. Remove the end cap and slide the cleat off the end of the rail. Slide-in campers camper applications certain truck models are not recommended for slide-in camper...

  • Page 267

    Easy-off tailgate to simplify mounting of a camper unit with an overhang, the tailgate can be removed. Note: if your vehicle is equipped with a rear camera or rke the electrical connector must be disconnected prior to removing the tailgate. Disconnecting the rear camera or remote keyless entry — if ...

  • Page 268

    3. Disconnect the chassis wiring harness, ensuring the connector bracket does not fall into the sill. 4. Connect the chassis plug and bracket (provided in the glove box) to the chassis wiring harness and insert the bracket back into the sill. 5. Connect the tailgate plug (provided in the glove box) ...

  • Page 269

    3. Raise the tailgate to a 45 degree angle. 4. Raise the right side of the tailgate until the right side pivot clears the hanger bracket. 5. Slide the entire tailgate to the right to free the left side pivot. 6. Remove the tailgate from the vehicle. Note: do not carry the tailgate loose in the truck...

  • Page 270

    Tri-fold tonneau cover — if equipped your vehicle may be equipped with a tri-fold tonneau cover which consists of different features: • easy tri-fold cover • tonneau fore aft locator • crosscar inside bed locator • front and rear clamps • stowage strap • locking capability note: the tonneau cover ca...

  • Page 271

    2. Pull down on the first set of clamps on both driver and passenger sides to the semi clamped position. 3. Pull down on the clamp wire and push the clamp up into the proper released position. Note: be sure the clamp and clamp wire is in the proper released position. Semi clamped position proper rel...

  • Page 272

    Caution! Make sure the tonneau cover clamp and clamp wire is in the proper released position. If the clamp and clamp wire is not properly released, damage to the tonneau cover material will result. 4. Pick up on the tonneau cover and fold it back onto the second panel. 5. Pick up on the cover and fo...

  • Page 273

    7. Pull down on the clamp wire and push the clamp up into the proper released position. 8. Be sure to clip both stowage straps together to insure the cover stays together. Semi clamped position proper released position 3 understanding the features of your vehicle 271.

  • Page 274

    9. With two people remove the cover. Note: be sure the tonneau cover has been folded completely before removing. Tri-fold tonneau cover installation to install the tonneau cover follow the following steps: 1. Position the folded tonneau cover on the truck bed and push the cover forward against the f...

  • Page 275

    3. Push clamp wires up and under the flange of box (or flange of ram box rail, if equipped) to the semi clamped position. 4. Push clamp handles upward to the clamped position to properly engage the clamps. Note: once clamped, be sure the clamps are not par- tially clamped to the truck bed flange. Se...

  • Page 276

    5. Disengage the stowage straps. 6. Unfold tonneau cover to the intermediate position. Note: the vehicle cannot be driven when the tonneau cover is in this position. Improper clamp position intermediate position (vehicle cannot be driven) 274 understanding the features of your vehicle.

  • Page 277

    7. Completely unfold the tonneau cover. 8. Pull down on the second set of clamp handles to release the clamps from the stowed position. Fully unfolded position stowed position 3 understanding the features of your vehicle 275.

  • Page 278

    9. Push clamp wires up and under the flange of box (or flange of ram box rail, if equipped) to the semi clamped position. 10. Push clamp handles upward to the clamped position to properly engage the clamps. Note: once clamped, be sure the clamps are not par- tially clamped to the truck bed flange. S...

  • Page 279

    The tonneau cover clamps can be locked when in the clamped position by placing a lock through the locking hole. Improper clamp position locking hole 3 understanding the features of your vehicle 277.

  • Page 280

    Caution! It is the driver’s responsibility to ensure the tonneau cover is properly installed on the vehicle. Failure to follow this procedure can result in detachment of the tonneau cover from the vehicle and/or damage to the vehicle/tonneau cover. Tri-fold tonneau cover cleaning for proper cleaning...

  • Page 281: Contents

    Understanding your instrument panel contents 䡵 instrument panel features . . . . . . . . . .282 䡵 instrument cluster — midline (evic) . .283 䡵 instrument cluster — premium (did) . .284 䡵 instrument cluster descriptions . . . . .285 䡵 electronic vehicle information center (evic) . . . . . . . . . . ....

  • Page 282

    ▫ did white telltales . . . . . . . . . . . . . . . . . . . .339 ▫ did selectable menu items . . . . . . . . . . . . . .340 䡵 uconnect® settings . . . . . . . . . . . . . . . . . . .351 ▫ buttons on the faceplate. . . . . . . . . . . . . . . .352 ▫ buttons on the touchscreen. . . . . . . . . . . . ....

  • Page 283

    䡵 uconnect® voice recognition . . . . . . . . . .417 ▫ introducing uconnect® . . . . . . . . . . . . . . . . .417 ▫ get started . . . . . . . . . . . . . . . . . . . . . . . . . .418 ▫ basic voice commands. . . . . . . . . . . . . . . . . .419 ▫ radio . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Page 284

    Instrument panel features 1 — headlight switch 7 — 115v power inverter outlet 13 — gear selector/transfer case position switch — if equipped 2 — instrument cluster 8 — power outlet — if equipped 14 — ignition switch 3 — radio 9 — lower switch bank 15 — hood release 4 — hazard switch 10 — instrument ...

  • Page 285

    Instrument cluster — midline (evic) electronic vehicle information display (evic) 4 understanding your instrument panel 283.

  • Page 286

    Instrument cluster — premium (did) driver information display (did) 284 understanding your instrument panel.

  • Page 287

    Instrument cluster descriptions 1. Tachometer the tachometer indicates engine speed in revolutions per minute (rpm x 1000). Caution! Do not operate the engine with the tachometer pointer at high rpm for extended periods. Engine operation over 3200 rpm (redline) can result in significant damage that ...

  • Page 288

    3. Malfunction indicator light (mil) the malfunction indicator light (mil) is part of an onboard diagnostic (obdii) system which monitors the emissions and engine control sys- tem. If the vehicle is ready for emissions testing, the light will come on when the ignition is first turned on and remain o...

  • Page 289

    4. Turn signal indicators the arrow will flash with the exterior turn signal when the turn signal lever is operated. Note: • a continuous chime will sound if the vehicle is driven more than 1 mile (1.6 km) with either turn signal on. • check for an inoperative outside light bulb if either indicator ...

  • Page 290

    Hydraulic system malfunction or that a problem with the brake booster has been detected by the anti-lock brake system (abs) / electronic stability control (esc) system. In this case, the light will remain on until the condition has been corrected. If the problem is related to the brake booster, the ...

  • Page 291

    Unless the parking brake is applied or a brake fault is detected. If the light does not illuminate, have the light inspected by an authorized dealer. The light also will turn on when the parking brake is applied with the ignition switch in the on/run posi- tion. Note: this light shows only that the ...

  • Page 292

    Dealer as soon as possible. Refer to “occupant restraints” in “things to know before starting your vehicle” for further information. 10. Oil pressure gauge — if equipped the pointer should always indicate some oil pres- sure when the engine is running. A continuous high or low reading under normal d...

  • Page 293

    16. Tire pressure monitoring telltale light — if equipped each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (if your vehicle has tir...

  • Page 294

    Of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the tpms from functioning properly. Always check the tpms malfunction telltale after replacing one or more tires or wheels on your vehicle, to ensure that the replacement or alternate tires...

  • Page 295

    18. Electronic vehicle information center (evic)/driver information display (did) the evic/did features a driver-interactive display that is located in the instrument cluster. Refer to “electronic vehicle information center (evic)” or “driver informa- tion display (did)” in “understanding your instr...

  • Page 296

    22. Tow/haul the tow haul button is located on the center stack upper switch bank. This light will illumi- nate when tow haul mode is selected. 23. Electronic stability control (esc) activation/ malfunction indicator light — if equipped the “esc activation/malfunction indicator light” in the instrum...

  • Page 297

    The gauge pointer will likely indicate a higher tempera- ture when driving in hot weather, up mountain grades, or when towing a trailer. It should not be allowed to exceed the upper limits of the normal operating range. Caution! Driving with a hot engine cooling system could damage your vehicle. If ...

  • Page 298

    If a problem is detected, the light will come on while the engine is running. Cycle the ignition key when the vehicle has completely stopped and the shift lever is placed in the park position. The light should turn off. If the light remains lit with the engine running, your vehicle will usually be d...

  • Page 299

    28. 4wd indicator light — if equipped this light alerts the driver that the vehicle is in the four-wheel drive mode, and the front and rear driveshafts are mechanically locked to- gether forcing the front and rear wheels to rotate at the same speed. Refer to “four-wheel drive operation — if equipped...

  • Page 300

    • trip a • trip b • stop/start info (if equipped) • air suspension (if equipped) • trailer tow • messages • screen setup • vehicle settings (not equipped with a uconnect 5.0 & 8.4 radio) the system allows the driver to select information by pushing the following evic control buttons located on the l...

  • Page 301

    • down arrow button push and release the down arrow button to scroll downward through the main menu items. • right arrow button push and release the right arrow button to access/select the information screens or sub- menu screens of a main menu item. Push and hold the right arrow button for two seco...

  • Page 302

    2. Temperature display displays the temperature in degrees celsius or degrees fahrenheit. 3. Main screen displays main menu, sub-menus, settings. 4. Evic white telltales 5. Evic amber telltales 6. Evic red telltales 7. Audio/phone information and sub-menu information whenever there are sub-menus ava...

  • Page 303

    • unstored messages this message type is displayed indefinitely or until the condition that activated the message is cleared. Examples of this message type are “turn signal on” (if a turn signal is left on) and “lights on” (if driver leaves the vehicle). • unstored messages until run these messages ...

  • Page 304

    3. Push and release the right arrow button to access the ”vehicle info” screen, then scroll up or down to select “oil life.” 4. Push and hold the right arrow button to select “reset,” then push and release the right arrow button to select “no” or “yes” to reset the oil life to 100%. 5. Push and rele...

  • Page 305

    • washer fluid low • oil pressure low • oil change due • fuel low • service anti-lock brake system • service electronic throttle control • service power steering • cruise off • cruise ready • cruise set to xxx mph • tire pressure screen with low tire(s) “inflate tire to xx” • tire pressure informati...

  • Page 306

    • vehicle not in park • key in ignition • key in ignition lights on • remote start active key to run • remote start active push start button • remote start aborted fuel low • remote start aborted too cold • remote start aborted door open • remote start aborted hood open • remote start aborted trunk ...

  • Page 307

    • transmission cool ready to drive • trailer brake disconnected • service transmission • service shifter • engage park brake to prevent rolling • transmission too cold idle with engine on • washer fluid low • service air suspension system • heavy duty air suspension system disabled • selected ride h...

  • Page 308

    • battery low start engine to change ride height • stop/start ready – if equipped • stop/start not ready – if equipped • stop/start not ready hood open – if equipped • stop/start not ready battery charging – if equipped • stop/start not ready trailer tow/haul selected – if equipped • stop/start not ...

  • Page 309

    • stop/start autostop active – if equipped • stop/start to restart push clutch or shift to neutral – if equipped • stop/start req’d fault detected – if equipped • stop/start cannot autostart hood open – if equipped • stop/start unavailable service battery – if equipped • stop/start unavailable servi...

  • Page 310

    • oil temperature warning light this telltale indicates engine oil temperature is high. If the light turns on while driving, stop the vehicle and shut off the engine as soon as possible. • charging system light this light shows the status of the electrical charg- ing system. If the light stays on or...

  • Page 311

    • engine temperature warning light this light warns of an overheated engine condi- tion. As temperatures rise and the gauge ap- proaches h, this indicator will illuminate and a single chime will sound after reaching a set threshold. Further overheating will cause the temperature gauge to pass h, a c...

  • Page 312

    • windshield washer fluid low indicator this telltale will turn on to indicate the wind- shield washer fluid is low. • low coolant level indicator this telltale will turn on to indicate the vehicle coolant level is low. • transmission temperature warning telltale this telltale indicates that the tra...

  • Page 313

    • air suspension payload protection telltale — if equipped this telltale will turn on to indicate that the maximum payload may have been exceeded or load leveling cannot be achieved at its current ride height. Protection mode will automatically be selected in order to “protect” the air suspension sy...

  • Page 314

    Evic selectable menu items push and release the up or down arrow buttons until the desired selectable menu item is highlighted in the evic. Speedometer menu item push and release the up or down arrow button until the speedometer menu item is highlighted in the evic. Push and release the right arrow ...

  • Page 315

    • economy gauge • average fuel economy value • range to empty trip menu item trip a push and release the up or down arrow button until the trip a menu item is highlighted in the evic. The trip a information will display the following: • distance • average mpg • elapsed time push and hold right arrow...

  • Page 316

    Air suspension menu item — if equipped push and release the up or down arrow button until the air suspension menu item is highlighted in the evic. Push and release the right arrow button to display the air suspension status. Trailer tow menu item push and release the up or down arrow button until th...

  • Page 317

    • cruise off • cruise ready • cruise set to xxx mph • tire pressure screen with low tire(s) “inflate tire to xx” • tire pressure information system (tpis) • service tire pressure system • parking brake engaged • brake fluid low • service electronic braking system • engine temperature hot • battery v...

  • Page 318

    • remote start aborted door open • remote start aborted hood open • remote start aborted trunk open • remote start aborted time expired • remote start disabled start to reset • service airbag system • service airbag warning light • driver seatbelt unbuckled • passenger seatbelt unbuckled • front sea...

  • Page 319

    • service air suspension system • heavy duty air suspension system disabled • selected ride height not permitted due to speed • selected ride height not permitted due to payload • selected ride height not permitted - payload too light • battery low start engine to change ride height • normal ride he...

  • Page 320

    • stop/start not ready trailer tow/haul selected – if equipped • stop/start not ready 4wd/low range selected – if equipped • stop/start not ready fuel level low – if equipped • stop/start not ready steep incline – if equipped • stop/start not ready extreme outside temperature – if equipped • stop/st...

  • Page 321

    • stop/start cannot autostart hood open – if equipped • stop/start unavailable service battery – if equipped • stop/start unavailable service stop/start system – if equipped • stop/start to restart shift out of park – if equipped • stop/start off – if equipped • autostop duration – if equipped the r...

  • Page 322

    Setting names setting names abbreviated (left submenu layer) sub-menus (right submenu layer) 1 language select language english, spanish, french, italian, german, dutch 2 units units u.S.; metric 3 parksense parksense • notification — sound only; sound & display • front volume — low; medium; high • ...

  • Page 323

    Setting names setting names abbreviated (left submenu layer) sub-menus (right submenu layer) 10 automatic high- beams auto highbeams on; off 11 daytime running lights — if equipped daytime lights on; off 12 flash lights with lock lights w/ lock on; off 13 auto lock doors auto lock doors on; off 14 a...

  • Page 324

    Setting names setting names abbreviated (left submenu layer) sub-menus (right submenu layer) 18 key fob linked to memory key in memory on; off 19 passive entry passive entry on; off 20 remote start com- fort system rmt start comfort off; remoter start; all starts 21 easy exit seat easy exit seat on;...

  • Page 325

    Setting names setting names abbreviated (left submenu layer) sub-menus (right submenu layer) 29 wheel alignment mode wheel alignment on; off 30 horn w/ remote lower horn w/ rmt lwr on; off 31 lights w/ remote lower lights w/ rmt lwr on; off 32 trailer select trailer select trailer 1; trailer 2; trai...

  • Page 326

    Setting names setting names abbreviated (left submenu layer) sub-menus (right submenu layer) • equipment • flatbed • gooseneck • horse • livestock • motorcycle • snowmobile • travel • utility • 5th wheel 35 compass variance compass var 1-15 increments of 1 36 calibrate compass compass cal cancel; ca...

  • Page 327

    Turn menu off push and release the right arrow button to exit the main menu. Push and release any evic control button to enter the evic main menu again. Driver information display (did) the driver information display (did) features a driver- interactive display that is located in the instrument clus...

  • Page 328

    • trip a • trip b • stop/start info (if equipped) • trailer tow • audio • stored messages • screen setup • vehicle settings (not equipped with a uconnect 5.0 & 8.4 radio) the system allows the driver to select information by pushing the following buttons mounted on the steering wheel: • up arrow but...

  • Page 329

    • down arrow button push and release the down arrow button to scroll downward through the main menu and submenus. • right arrow button push and release the right arrow button to access/select the information screens or sub- menu screens of a main menu item. Push and hold the right arrow button for t...

  • Page 330

    2. Audio / phone information and sub-menu informa- tion — whenever there are sub-menus available, the position within the sub-menus is shown here. 3. Selectable information (compass, temp, range to empty, trip a, trip b, average mpg, trailer trip (distance only), trailer brake gain, time) 4. Telltal...

  • Page 331

    • unstored messages this message type is displayed indefinitely or until the condition that activated the message is cleared. Examples of this message type are “turn signal on” (if a turn signal is left on) and “lights on” (if driver leaves the vehicle). • unstored messages until run these messages ...

  • Page 332

    3. Push and release the right arrow button to access the “ oil life” screen. 4. Push and hold the right arrow button for one second to access the “ oil life reset” screen. 5. Push and release the down arrow button to select “ yes ,” then push and release the right arrow button to select reset of the...

  • Page 333

    • traction control off • washer fluid low • oil pressure low • oil change due • fuel low • service antilock brake system • service electronic throttle control • service power steering • cruise off • cruise ready • cruise set to xxx mph • tire pressure screen with low tire(s) “inflate tire to xx” • t...

  • Page 334

    • sound horn with remote lock: off; 1st push; 2nd push • vehicle not in park • key in ignition • key in ignition lights on • remote start active key to run • remote start active push start button • remote start aborted fuel low • remote start aborted too cold • remote start aborted door open • remot...

  • Page 335

    • transmission getting hot push brake • trans. Hot stop safely shift to park wait to cool • transmission cool ready to drive • trailer brake disconnected • service transmission • service shifter • engage park brake to prevent rolling • transmission too cold idle with engine on • washer fluid low • s...

  • Page 336

    • off road 2 watch for clearance • entry/exit watch for clearance • air suspension temporarily disabled for jacking and tire change • battery low start engine to change ride height • stop/start ready – if equipped • stop/start not ready – if equipped • stop/start not ready hood open – if equipped • ...

  • Page 337

    • stop/start not ready max cooling or heating se- lected – if equipped • stop/start not ready front defrost selected – if equipped • stop/start not ready steering wheel turned – if equipped • stop/start autostop active – if equipped • stop/start to restart push clutch or shift to neutral – if equipp...

  • Page 338

    • oil pressure warning light this telltale indicates low engine oil pressure. If the light turns on while driving, stop the vehicle and shut off the engine as soon as possible. A chime will sound when this light turns on. Do not operate the vehicle until the cause is corrected. This light does not s...

  • Page 339

    If the light remains lit with the engine running, your vehicle will usually be drivable. However, see an autho- rized dealer for service as soon as possible. If the light is flashing when the engine is running, immediate service is required. You may experience reduced performance, an elevated/rough ...

  • Page 340

    Did yellow telltales this area will show reconfigurable yellow caution tell- tales. These telltales include: • low fuel telltale when the fuel level reaches approximately 3.0 gal (11.0 l), this light will turn on, and remain on until fuel is added. • windshield washer fluid low indicator this tellta...

  • Page 341

    Warning! If you continue operating the vehicle when the transmission temperature warning light is illumi- nated you could cause the fluid to boil over, come in contact with hot engine or exhaust components and cause a fire. • air suspension payload protection telltale — if equipped this telltale wil...

  • Page 342

    • electronic speed control set this light will turn on when the electronic speed control is set. Refer to “electronic speed control” in “understanding the features of your vehicle” for further information. • hill descent control – if equipped this indicator will illuminate when hill de- scent contro...

  • Page 343

    A vehicle icon is displayed with tire pressure values in each corner of the icon. • tire pressure: – tire pressure information system (3500 series heavy duty ram trucks) – a vehicle icon is displayed with the tire pressure values in each corner of the icon. – if the tire pressure system requires ser...

  • Page 344

    • average mpg or l/100 km trip a push and release the up or down arrow button until the trip a icon/title is highlighted in the did. The trip a information will display the following: • distance mi or km • average mpg or l/100 km • average mph or km/h • elapsed time hold the right arrow button to re...

  • Page 345

    Stop/start – if equipped push and release the up or down arrow button until the stop/start icon is highlighted in the did. Push and release the right arrow button to display the stop/start status. Trailer tow push and release the up or down arrow button until the trailer tow icon is highlighted. Pus...

  • Page 346

    Screen setup push and release the up or down arrow button until the screen setup display icon is highlighted in the did. Push and release the right arrow button to enter the screen setup submenu. The screen setup feature allows you to change what information is displayed in the instrument cluster as...

  • Page 347

    Settings options • range • average mpg • current mpg • trip a • trip b • trailer trip • trailer brake gain 4 lower right • none • compass • outside temp. • time • range • average mpg • current mpg • trip a • trip b • trailer trip settings options • trailer brake gain 5 upper gauge • none • trans tem...

  • Page 348

    Vehicles settings (customer-programmable features) note: this feature is only available on 5.0 and 8.4 uconnect® radios personal settings allows the driver to set and recall features when the transmission is in park. Push and release the up and down button until per- sonal settings displays in the d...

  • Page 349

    Setting names setting names abbreviated (left submenu layer) sub-menus (right submenu layer) • rear volume — low; me- dium; high 4 tilt mirror in reverse tilt mirror in r on; off 5 rain sensing wipers auto wipers on; off 6 hill start assist hill start assist on; off 7 headlights off delay lights off...

  • Page 350

    Setting names setting names abbreviated (left submenu layer) sub-menus (right submenu layer) 14 sound horn with remote start horn w/ rmt start on; off 15 sound horn with remote lock horn w/ rmt lock on; off 16 remote unlock sequence remote unlock driver door; all doors 17 key fob linked to memory ke...

  • Page 351

    Setting names setting names abbreviated (left submenu layer) sub-menus (right submenu layer) 25 tire/jack mode tire/jack mode on; off 26 transport mode transport mode on; off 27 wheel alignment mode wheel alignment on; off 28 horn w/ remote lower horn w/ rmt lwr on; off 29 lights w/ remote lower lig...

  • Page 352

    Setting names setting names abbreviated (left submenu layer) sub-menus (right submenu layer) • equipment • flatbed • gooseneck • horse • tag • motorcycle • snowmobile • travel • utility • 5th wheel 33 compass variance compass var 1-15 increments of 1 34 calibrate compass compass cal cancel; calibrat...

  • Page 353

    Uconnect® settings the uconnect® system uses a combination of buttons on the touchscreen and buttons on the faceplate located on the center of the instrument panel that allows you to access and change the customer programmable features. Many features can vary by vehicle. Uconnect® 5.0 buttons on the...

  • Page 354

    Buttons on the faceplate buttons on the faceplate are located below the uconnect® system in the center of the instrument panel. In addition, there is a scroll/enter control knob located on the right side of the climate controls in the center of the instru- ment panel. Turn the control knob to scroll...

  • Page 355

    Buttons on the touchscreen buttons on the touchscreen are accessible on the uconnect® display. Customer programmable features — uconnect® 5.0 personal settings push the settings button on the faceplate to display the settings menu screen. In this mode the uconnect® system allows you to access progra...

  • Page 356

    • display mode when in this display you may select the auto or manual display settings. To change mode status, press and re- lease the “auto” or “manual” button on the touchscreen. Press the back arrow/done button on the touchscreen to return to the previous menu. • set language when in this display...

  • Page 357

    Voice after pressing the “voice” button on the touchscreen the following settings will be available: • voice response length when in this display, you may change the voice re- sponse length settings. To change the voice response length, press the “voice response length” button on the touchscreen and...

  • Page 358

    Safety/assistance after pressing the “safety/assistance” button on the touchscreen the following settings will be available: • parksense® the parksense® system will scan for objects behind the vehicle when the transmission shift lever/gear selector is in reverse and the vehicle speed is less than 11...

  • Page 359

    Entire surroundings” across the top of the screen. After five seconds, this note will disappear. To make your selection, press the “parkview® backup camera active guidelines” button on the touchscreen and make your selection. Press arrow button on the touchscreen to return to the previous menu. • pa...

  • Page 360

    Lights after pressing the “lights” button on the touchscreen, the following settings will be available: • headlight off delay when this feature is selected, it allows the adjustment of the amount of time the headlights remain on after the engine is shut off. To change the headlight off delay setting...

  • Page 361

    • auto dim high beams — if equipped when this feature is selected, the high beam headlights will activate/deactivate automatically under certain con- ditions. To make your selection, press the “auto high beams” button on the touchscreen, and select from “on” or “off.” press the back arrow/done butto...

  • Page 362

    • auto unlock on exit when this feature is selected, all doors will unlock when the vehicle is stopped, the transmission is in the park or neutral position and the driver’s door is opened. To make your selection, press the “auto unlock on exit” button on the touchscreen and select from “on” or “off....

  • Page 363

    • memory linked to fob — if equipped this feature provides automatic driver seat positioning to enhance driver mobility when entering and exiting the vehicle. To make your selection, press the “memory linked to fob” button on the touchscreen and select from “on” or “off.” press the back arrow/done b...

  • Page 364

    Auto comfort systems — if equipped after pressing the “auto-on comfort” button on the touchscreen the following settings will be available: • auto-on driver heated/ventilated seat & steering wheel with vehicle start — if equipped when this feature is selected the driver’s heated seat and heated stee...

  • Page 365

    • engine off power delay when this feature is selected, the power window switches, radio, uconnect® phone system (if equipped), dvd video system (if equipped), power sunroof (if equipped), and power outlets will remain active for up to 10 minutes after the ignition is cycled to off. Opening either f...

  • Page 366

    • auto entry/exit suspension when this feature is selected, the vehicle automatically lowers from ride height position when vehicle shifted to park for easy entry/exit. To make your selection, press the “auto entry/exit” button on the touchscreen, select “on” or “off” followed by pressing the back a...

  • Page 367

    Performing a wheel alignment this mode must be en- abled. Refer to your authorized dealer for further infor- mation. Trailer brake after pressing the “trailer brake” button on the touch- screen the following settings will be available: • trailer select when this feature is selected, the trailer type...

  • Page 368

    • speed adjusted volume this feature increases or decreases volume relative to vehicle speed. To change the speed adjusted volume press the “speed adjusted volume” button on the touch- screen and select from “off,” “1,” “2” or “3” buttons on the touchscreen. Press the back arrow/done button on the t...

  • Page 369

    Compass settings — if equipped after pressing the “compass settings” button on the touchscreen the following settings will be available: • variance compass variance is the difference between magnetic north and geographic north. To compensate for the differences the variance should be set for the zon...

  • Page 370

    By pressing the “on” button on the touchscreen and completing one or more 360-degree turns (in an area free from large metal or metallic objects). The compass will now function normally. Phone/bluetooth® after pressing the “phone/bluetooth” button on the touchscreen the following settings will be av...

  • Page 371

    Write down the sirius id numbers for your receiver. To reactivate your service, either call the number listed on the screen or visit the provider online. Note: siriusxm travel link is a separate subscription and is available for u.S. Residents only. Restore settings after pressing the “restore setti...

  • Page 372

    System information after pressing the “system information” button on the touchscreen the following information will be available: • system information when system information is selected, a system information screen will appear displaying the system software version. Customer programmable features —...

  • Page 373

    Display after pressing the “display” button on the touchscreen the following settings will be available. • display mode when in this display you may select one of the auto display settings. To change mode status, select from “day,” “night” or “auto” until a check-mark appears next to the setting, sh...

  • Page 374

    Note: to make changes to the ⬙display brightness with headlights off ⬙ setting, the headlights must be off and the interior dimmer switch must not be in the ⬙party⬙ or ⬙parade⬙ positions. • set theme this feature will allow you to choose a background theme for the display screen. The theme will chan...

  • Page 375

    Next to the setting, showing that setting has been se- lected. Press the back arrow button on the touchscreen to return to the previous menu. • navigation turn-by-turn in cluster — if equipped when this feature is selected, the turn-by-turn directions will appear in the display as the vehicle approa...

  • Page 376

    Voice after pressing the “voice” button on the touchscreen the following settings will be available: • voice response length when in this display, you may change the voice response length settings. To change the voice response length, select from the “brief” or “detailed” buttons on the touchscreen ...

  • Page 377

    • set time minutes this feature will allow you to adjust the minutes. The “sync with gps time” button on the touchscreen must be unchecked. To make your selection, press the “+” or “–” buttons on the touchscreen to adjust the minutes up or down. Press the back arrow button on the touchscreen to retu...

  • Page 378

    Assist” in “understanding the features of your vehicle” for system function and operating information. • front parksense® chime volume the front parksense® chime volume settings can be selected from the evic/did or uconnect® system — if equipped. The chime volume settings include low, medium, and hi...

  • Page 379

    • parkview® backup camera your vehicle may be equipped with the parkview® rear back up camera that allows you to see an on-screen image of the rear surroundings of your vehicle whenever the shift lever is put into reverse. The image will be displayed on the radio touchscreen display along with a cau...

  • Page 380

    • rain sensing auto wipers when this feature is selected, the system will automati- cally activate the windshield wipers if it senses moisture on the windshield. To make your selection, press the “rain sensing” button on the touchscreen to select from on or off. Press the back arrow button on the to...

  • Page 381

    • headlight off delay when this feature is selected, the driver can choose to have the headlights remain on for 0, 30, 60, or 90 seconds when exiting the vehicle. To make your selection, press the “+” or “–” buttons on the touchscreen to adjust the seconds up or down. Press the back arrow button on ...

  • Page 382

    To the previous menu. Refer to “lights/ automatic high beam — if equipped” in “understanding the features of your vehicle” for further information. • flash lights with lock when this feature is selected, the exterior lamps will flash when the doors are locked or unlocked with the remote keyless entr...

  • Page 383

    • flash lights with lock when this feature is selected, the front and rear turn signals will flash when the doors are locked or unlocked with the rke transmitter. This feature may be selected with or without the sound horn on lock feature selected. To make your selection, press the “flash lights wit...

  • Page 384

    Note: if the vehicle is programmed 1st press of key fob unlocks “all doors”, all doors will unlock no matter which passive entry equipped door handle is grasped. If 1st press of key fob unlocks “driver door” is pro- grammed, only the driver’s door will unlock when the driver’s door is grasped. With ...

  • Page 385

    Note: the seat will return to the memorized seat location (if personal settings linked to key fob is set to on) when the remote keyless entry (rke) transmitter is used to unlock the door. Refer to “driver memory seat” in “understanding the features of your vehicle” for further information. Auto comf...

  • Page 386

    • engine off power delay when this feature is selected, the power window switches, radio, uconnect® phone system (if equipped), dvd video system (if equipped), power sunroof (if equipped), and power outlets will remain active for up to 10 minutes after the ignition is cycled to off. Opening either f...

  • Page 387

    System has been activated or the check-mark is removed showing the system has been deactivated. • suspension display messages when “all” is selected, all the air suspension alerts will be displayed. When “warning” is selected only the air suspension warnings will be displayed. • automatic aero mode ...

  • Page 388

    Trailer brake after pressing the “trailer brake” button on the touch- screen the following settings will be available: • trailer select when this feature is selected, the trailer type can be selected between “trailer 1,” “trailer 2,” “trailer 3” and “trailer 4.” to make your selection, scroll up or ...

  • Page 389

    The scale between the “+” and “–” buttons on the touchscreen. Press the back arrow button on the touch- screen to return to the previous menu. • speed adjusted volume this feature increases or decreases volume relative to vehicle speed. To change the speed adjusted volume press the “speed adjusted v...

  • Page 390

    Phone/bluetooth® after pressing the “phone/bluetooth®” button on the touchscreen the following settings will be available: • paired phones this feature shows which phones are paired to the phone/bluetooth® system. For further information, refer to the uconnect® supplement manual. • paired audio sour...

  • Page 391

    Write down the sirius id numbers for your receiver. To reactivate your service, either call the number listed on the screen or visit the provider online. Note: siriusxm travel link is a separate subscription and is available for u.S. Residents only. Restore settings after pressing the “restore setti...

  • Page 392

    System information after pressing the “system information” button on the touchscreen the following settings will be available: • system information when system information is selected, a system informa- tion screen will appear displaying the system software version. Uconnect® radios — if equipped fo...

  • Page 393

    Steering wheel audio controls — if equipped the remote sound system controls are located on the back surface of the steering wheel. Reach behind the wheel to access the switches. The right hand control is a rocker type switch with a push-button in the center. Pushing the top of the switch will incre...

  • Page 394

    The button located in the center of the left hand control will tune to the next pre-set station that you have programmed in the radio pre-set buttons. Cd player — if equipped pushing the top of the switch once will go to the next track on the cd. Pressing the bottom of the switch once will go to the...

  • Page 395

    Radio operation and mobile phones under certain conditions, the mobile phone being on in your vehicle can cause erratic or noisy performance from your radio. This condition may be lessened or eliminated by relocating the mobile phone antenna. This condition is not harmful to the radio. If your radio...

  • Page 396

    This device complies with part 15 of the fcc rules and with industry canada license-exempt rss standard(s). Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may c...

  • Page 397

    • consult the dealer or an experienced radio technician for help. Climate controls the climate control system allows you to regulate the temperature, amount, and direction of air circulating throughout the vehicle. The controls are located on the instrument panel below the radio. Manual climate cont...

  • Page 398

    Front blower control there are four blower speeds. Use this control to regulate the amount of air forced through the system in any mode you select. The blower speed increases as you move the control clockwise from the off position. Temperature control use this control to regulate the tem- perature o...

  • Page 399

    Note: a/c cannot be deselected when in max a/c position. The led will blink three times if the a/c button is pushed. If your air conditioning performance seems lower than expected, check the front of the a/c condenser (located in front of the radiator), for an accu- mulation of dirt or insects. Clea...

  • Page 400

    Floor mode air is directed through the floor outlets with a small amount through the defrost and side win- dow demist outlets. Mix mode air is directed through the floor, defrost and side window demist outlets. This setting works best in cold or snowy conditions that require extra heat at the windsh...

  • Page 401

    Note: • if the recirculation button is pushed when the system is in defrost mode, the recirculation led indicator will flash three times and then turn off to indicate recirculation mode is not allowed. • continuous use of the recirculation mode may make the inside air stuffy and window fogging may o...

  • Page 402

    Manual climate controls with touchscreen — if equipped buttons on the faceplate the buttons on the faceplate are located below the radio touchscreen. Buttons on the touchscreen buttons on the touchscreen are accessible on the radio. Climate controls — buttons on the faceplate temperature controls — ...

  • Page 403

    Button descriptions (applies to both buttons on the faceplate and buttons on the touchscreen) 1. Max a/c button press and release to toggle between max a/c and the prior settings. The button on the touchscreen illuminates when max a/c is on. In max a/c, the blower level and mode position can be adju...

  • Page 404

    5. Defrost button press and release this button to turn on the rear window defroster (if equipped) and the heated outside mirrors (if equipped). An indicator will illuminate when the rear window defroster is on. The rear window defroster automatically turns off after 10 minutes. Caution! Failure to ...

  • Page 405

    • bi-level mode air comes from the instrument panel outlets and floor outlets. A slight amount of air is directed through the defrost and side window demister outlets. Note: bi-level mode is designed under comfort con- ditions to provide cooler air out of the panel outlets and warmer air from the fl...

  • Page 406

    Buttons on the touchscreen use the small blower icon to reduce the blower setting and the large blower icon to increase the blower setting. Blower can also be selected by pressing the blower bar area between the icons. 8. Climate control off button press and release this button to turn the climate c...

  • Page 407

    Automatic climate controls with touchscreen — if equipped buttons on the faceplate the buttons on the faceplate are located below the uconnect® screen. Buttons on the touchscreen buttons on the touchscreen are accessible on the uconnect® system screen. Automatic climate controls — buttons on the fac...

  • Page 408

    Button descriptions (applies to both buttons on the faceplate and buttons on the touchscreen) 1. Max a/c button press and release to change the current setting, the indicator illuminates when max a/c is on. Performing this function again will cause the max a/c operation to switch into manual mode an...

  • Page 409

    5. Front defrost button press and release to change the current airflow setting to defrost mode. The indicator illuminates when this fea- ture is on. Air comes from the windshield and side window demist outlets. When the defrost button is selected, the blower level will increase. Use defrost mode wi...

  • Page 410

    7. Passenger temperature control up button (uconnect® 8.4) provides the passenger with independent temperature control. Push the button on the faceplate for warmer temperature settings or on the touchscreen, press and slide the temperature bar towards the red arrow for warmer temperature settings. N...

  • Page 411

    Blower control knob on the faceplate the blower speed increases as you turn the control clockwise from the lowest blower setting. The blower speed decreases as you turn the blower control knob counterclockwise. Button on the touchscreen use the small blower icon to reduce the blower setting and the ...

  • Page 412

    • floor mode air comes from the floor outlets. A slight amount of air is directed through the defrost and side window demister outlets. • mix mode air comes from the floor, defrost and side window demist outlets. This mode works best in cold or snowy conditions. 12. Climate control off button press ...

  • Page 413

    Note: in sync mode, this button will also automatically adjust the passenger temperature setting at the same time. 15. Temperature control (uconnect® 5.0) press the temperature button on the touchscreen to regu- late the temperature of the air inside the passenger com- partment. Moving the temperatu...

  • Page 414

    Max a/c max a/c sets the control for maximum cooling perfor- mance. Press and release to toggle between max a/c and the prior settings. The button on the touchscreen illuminates when max a/c is on. In max a/c, the blower level and mode position can be adjusted to desired user settings. Pressing othe...

  • Page 415

    Automatic temperature control (atc) automatic operation 1. Push the auto button on the faceplate or press the “auto” button on the touchscreen. 2. Next, adjust the temperature you would like the system to maintain by adjusting the driver and pas- senger temperature buttons on the faceplate or but- t...

  • Page 416

    The blower fan speed can be set to any fixed speed by adjusting the blower control. The fan will now operate at a fixed speed until additional speeds are selected. This allows the front occupants to control the volume of air circulated in the vehicle and cancel the auto mode. The operator can also s...

  • Page 417

    Vacation/storage any time you store your vehicle or keep it out of service (i.E., vacation) for two weeks or more, run the air conditioning system at idle for about five minutes in fresh air with the blower setting in high. This will ensure adequate system lubrication to minimize the possibility of ...

  • Page 418

    Control setting suggestions for various weather conditions operating tips chart 416 understanding your instrument panel.

  • Page 419

    Uconnect® voice recognition introducing uconnect® start using uconnect® voice recognition with these helpful quick tips. It provides the key voice commands and tips you need to know to control your uconnect® 5.0 or 8.4a/8.4an system. Key features: • 5” touchscreen • three buttons on either side of t...

  • Page 420

    If you see the icon on your touchscreen, you have the uconnect® 8.4an system. If not, you have a uconnect® 8.4a system. Get started 1. Visit uconnectphone.Com to check mobile device and feature compatibility and to find phone pairing in- structions. 2. Reduce background noise. Wind and passenger con...

  • Page 421

    Two buttons are all you need to control your uconnect® system with your voice. Basic voice commands the basic voice commands below can be given at any point while using your uconnect® system. Push the vr button . After the beep, say ѧ • cancel to stop a current voice session • help to hear a list of...

  • Page 422

    Uconnect® 5.0 uconnect® 8.4a/8.4an 420 understanding your instrument panel.

  • Page 423

    Radio use your voice to quickly get to the am, fm or siriusxm satellite radio® stations you would like to hear. (sub- scription or included siriusxm satellite radio® trial required.) push the vr button . After the beep, say ѧ • tune to ninety-five-point-five fm • tune to satellite channel hits 1 tip...

  • Page 424

    Media uconnect® offers connections via usb, sd, bluetooth® and auxiliary ports (if equipped). Voice operation is only available for connected usb and ipod® devices. (remote cd player optional and not available on all vehicles.) push the vr button . After the beep, say one of the following commands a...

  • Page 425

    Tip: press the browse button on the touchscreen to see all of the music on your ipod® or usb device. Your voice command must match exactly how the artist, album, song and genre information is displayed. Uconnect® 5.0 media uconnect® 8.4a/8.4an media 4 understanding your instrument panel 423.

  • Page 426

    Climate (8.4a/8.4an) too hot? Too cold? Adjust vehicle temperatures hands- free and keep everyone comfortable while you keep moving ahead. (if vehicle is equipped with climate control.) push the vr button . After the beep, say one of the following commands: • set driver temperature to 70 degrees • s...

  • Page 427

    Navigation (8.4a/8.4an) the uconnect® navigation feature helps you save time and become more productive when you know exactly how to get to where you want to go. (navigation is optional on the uconnect® 8.4a system. See your dealer to activate navigation at any time.) 1. To enter a destination, push...

  • Page 428

    Phone making and answering hands-free phone calls is easy with uconnect®. When the phonebook button is illumi- nated on your touchscreen, your system is ready. Check uconnectphone.Com for mobile phone compatibility and pairing instructions. Push the phone button . After the beep, say one of the foll...

  • Page 429

    Voice text reply uconnect® will announce incoming text messages. Push the phone button and say listen. (must have com- patible mobile phone paired to uconnect® system.) 1. Once an incoming text message is read to you, push the phone button . After the beep, say: “reply.” 2. Listen to the uconnect® p...

  • Page 430

    Tip: your mobile phone must have the full implementa- tion of the message access profile (map) to take advan- tage of this feature. For details about map, visit uconnectphone.Com. Apple iphone® ios6 or later sup- ports reading incoming text messages only. Uconnect® access (8.4a/8.4an) an included tr...

  • Page 431

    Register (8.4a/8.4an) 1. Press the apps button on the bottom of the 8.4-inch touchscreen. 2. If a pop-up message appears, press register or go to the favorite apps menu and press uconnect® regis- tration . 3. Read through the registration instructions. Enter and confirm your personal email address. ...

  • Page 432

    Mobile app (8.4a/8.4an) securely link your mobile device to your vehicle with the uconnect® access app. Once you have downloaded the app, you may start your vehicle or lock it from virtually any distance. (vehicle must be properly equipped with factory-installed remote start.) download the uconnect®...

  • Page 433

    Voice texting (8.4a/8.4an) 1. To send a message, push the phone button . After the beep, say the following command: “send mes- sage to john smith.” 2. Listen to the prompt. After the beep, dictate the message you would like to send. Wait for uconnect® to process your message. 3. The uconnect® system...

  • Page 434

    5. Listen to the system prompts and after the beep, tell uconnect® the place or business that you’d like uconnect® to find. Tip: once you perform a search, you can reorganize the results by selecting either the best match, rating or distance tab on the top of the touchscreen display. Yelp® 432 under...

  • Page 435

    Siriusxm travel link™ (8.4a/8.4an) need to find a gas station, view local movie listings, check a sports score or the 5 - day weather forecast? Siriusxm travel link™ is a suite of services that brings a wealth of information right to your uconnect® 8.4an system. (not available for 8.4a system.) push...

  • Page 436

    Additional information © 2015 fca us llc. All rights reserved. Mopar and uconnect are registered trademarks and mopar owner connect is a trademark of fca us llc. Android is a trademark of google inc. Siriusxm and all related marks and logos are trademarks of siriusxm radio inc. Yelp, yelp logo, yelp...

  • Page 437: Starting And Operating

    Starting and operating contents 䡵 starting procedures . . . . . . . . . . . . . . . .442 ▫ normal starting. . . . . . . . . . . . . . . . . . . . . . .442 ▫ automatic transmission . . . . . . . . . . . . . . . .443 ▫ keyless enter-n-go™ . . . . . . . . . . . . . . . . . .443 ▫ normal starting. . . ....

  • Page 438

    ▫ brake/transmission shift interlock system . . .454 ▫ eight-speed automatic transmission — if equipped . . . . . . . . . . . . . . . . . . . . . . . . . . .455 ▫ six-speed automatic transmission — 1500 models only (if equipped) . . . . . . . . . . . . . . . . . . . .464 ▫ six-speed automatic transm...

  • Page 439

    ▫ electronic vehicle information center (evic)/driver information display (did) display messages . . . . . . . . . . . . . . . . . . . . . . . . . . .521 ▫ operation . . . . . . . . . . . . . . . . . . . . . . . . . . .521 䡵 axle locker system — power wagon models only (if equipped) . . . . . . . . ...

  • Page 440

    䡵 off-road driving tips . . . . . . . . . . . . . . .549 ▫ after driving off-road . . . . . . . . . . . . . . . . .549 䡵 winch usage — power wagon only — (if equipped) . . . . . . . . . . . . . . . . . . . . . . . .550 ▫ things to know before using your winch. . . .550 ▫ understanding the features o...

  • Page 441

    ▫ trailer sway control (tsc) . . . . . . . . . . . . . .586 ▫ hill descent control (hdc) — if equipped . . .587 䡵 tire safety information . . . . . . . . . . . . .591 ▫ tire markings . . . . . . . . . . . . . . . . . . . . . . . .591 ▫ tire identification number (tin). . . . . . . . . . .594 ▫ tire ...

  • Page 442

    䡵 tire pressure monitor system (tpms) . .619 ▫ premium system . . . . . . . . . . . . . . . . . . . . . .621 ▫ tire pressure information system (tpis) 3500 series trucks . . . . . . . . . . . . . . . . . . . . . . . . .626 ▫ general information . . . . . . . . . . . . . . . . . . .627 䡵 fuel require...

  • Page 443

    䡵 adding fuel . . . . . . . . . . . . . . . . . . . . . . . .636 ▫ loose fuel filler cap message . . . . . . . . . . . .638 䡵 vehicle loading . . . . . . . . . . . . . . . . . . . .639 ▫ certification label . . . . . . . . . . . . . . . . . . . .639 䡵 trailer towing . . . . . . . . . . . . . . . . ....

  • Page 444

    Starting procedures before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belt. The starter should not be operated for more than 10- second intervals. Waiting a few seconds between such intervals will protect the starter from overheating. Warnin...

  • Page 445

    Automatic transmission start the engine with the transmission in park position. Apply the brake before shifting into any driving range. Note: • this vehicle is equipped with a transmission shift interlocking system. The brake pedal must be pressed to shift out of park. • if equipped with an 8 speed ...

  • Page 446

    4. If you wish to stop the cranking of the engine prior to the engine starting, push the button again. Note: normal starting of either a cold or a warm engine is obtained without pumping or pressing the accelerator pedal. To turn off the engine using engine start/stop button 1. Place the shift lever...

  • Page 447

    Engine start/stop button functions — with driver’s foot off the brake pedal (in park or neutral position) the engine start/stop button operates similar to an ignition switch. It has three positions, off, acc, run. To change the ignition switch positions without starting the vehicle and use the acces...

  • Page 448

    Caution! To prevent damage to the starter, do not crank the engine for more than 10 seconds at a time. Wait 10 to 15 seconds before trying again. Warning! • never pour fuel or other flammable liquids into the throttle body air inlet opening in an attempt to start the vehicle. This could result in a ...

  • Page 449

    After starting the idle speed is controlled automatically and it will decrease as the engine warms up. Stop/start system — if equipped the stop/start function is developed to save fuel and reduce emissions. The system will stop the engine auto- matically during a vehicle stop if the required conditi...

  • Page 450

    Autostop, the climate controls system may automati- cally adjust airflow to maintain cabin comfort. Customer settings will be maintained upon return to an engine running condition. Possible reasons the engine does not autostop prior to engine shut down, the system will check many safety and comfort ...

  • Page 451

    To start the engine while in autostop mode while in drive the engine will start when the brake pedal is released or the throttle pedal is depressed. The transmission will automatically reengage upon engine restart. During this transition the brakes will hold the vehicle to avoid undesired vehicle mo...

  • Page 452

    The engine may then be restarted by moving the trans- mission shift selector out of park (e.G. To drive) or, in some cases, only by a key start. The electronic vehicle information center (evic)/driver information display (did) will display a shift out of park message, or a stop/start key start requi...

  • Page 453

    3. At the next vehicle stop (after turning off the stop/ start system) the engine will not be stopped. 4. If the stop/start system is manually turned off, the engine can only be started and stopped by cycling the ignition switch. 5. The stop/start system will reset itself back to an on condition eve...

  • Page 454

    1500 models the engine block heater cord is routed under the hood on the passenger side of the vehicle near the right head lamp assembly. It is located between the front grill and the radiator, but underneath the black upper seal. 2500/3500 models the engine block heater cord is routed through the g...

  • Page 455

    Note: you must press and hold the brake pedal while shifting out of park. Warning! • it is dangerous to shift out of park or neutral if the engine speed is higher than idle speed. If your foot is not firmly pressing the brake pedal, the vehicle could accelerate quickly forward or in re- verse. You c...

  • Page 456

    Warning! (continued) • do not leave the key fob in or near the vehicle (or in a location accessible to children), and do not leave the ignition (in a vehicle equipped with keyless enter-n-go) in the acc or on/run posi- tion. A child could operate power windows, other controls, or move the vehicle. •...

  • Page 457

    In 8-speed vehicles, the brake pedal must also be pressed to shift from neutral into drive or reverse when the vehicle is stopped or moving at low speeds. Eight-speed automatic transmission — if equipped the transmission is controlled using a rotary electronic gear selector located on the instrument...

  • Page 458

    The transmission gear selector has only park, re- verse, neutral, and drive positions. Manual down- shifts can be made using the electronic range select (ers) shift control (refer to ⬙electronic range select (ers) operation ⬙ in this section for further information). Press- ing the gear-/gear+ switc...

  • Page 459

    Note: after selecting any gear range, wait a moment to allow the selected gear to engage before accelerating. This is especially important when the engine is cold. Park (p) this range supplements the parking brake by locking the transmission. The engine can be started in this range. Never attempt to...

  • Page 460

    Warning! (continued) the engine is idling normally and your foot is firmly pressing the brake pedal. • unintended movement of a vehicle could injure those in or near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, always apply...

  • Page 461

    Caution! • do not race the engine when shifting from park or neutral into another gear range, as this can damage the drivetrain. • before moving the transmission gear selector out of park, you must start the engine, and also press the brake pedal. Otherwise, damage to the gear selector could result....

  • Page 462

    Caution! Towing the vehicle, coasting, or driving for any other reason with the transmission in neutral can cause severe transmission damage. Refer to “recreational towing” in “starting and operating” and “towing a disabled vehicle” in “what to do in emergencies” for further information. Drive (d) t...

  • Page 463

    Transmission limp home mode transmission function is monitored electronically for abnormal conditions. If a condition is detected that could result in transmission damage, transmission limp home mode is activated. In this mode, the transmission may operate only in certain gears, or may not shift at ...

  • Page 464

    Note: even if the transmission can be reset, we recom- mend that you visit your authorized dealer at your earliest possible convenience. Your authorized dealer has diagnostic equipment to determine if the problem could recur. If the transmission cannot be reset, authorized dealer service is required...

  • Page 465

    To exit ers mode, simply push and hold the gear+ switch until the gear limit display disappears from the instrument cluster. Warning! Do not downshift for additional engine braking on a slippery surface. The drive wheels could lose their grip and the vehicle could skid, causing a collision or person...

  • Page 466

    The “tow/haul indicator light” will illuminate in the instrument cluster to indicate that tow/haul mode has been activated. Pushing the switch a second time restores normal operation. Normal operation is always the default at engine start-up. If tow/haul mode is desired, the switch must be pushed ea...

  • Page 467

    Only shift from drive to park or reverse when the accelerator pedal is released and the vehicle is stopped. Be sure to keep your foot on the brake pedal when shifting between these gears. The transmission shift lever has only park, reverse, neutral, and drive shift positions. Manual down- shifts can...

  • Page 468

    To move the shift lever out of park. As an added precau- tion, turn the front wheels toward the curb on a downhill grade and away from the curb on an uphill grade. Warning! • never use the park position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard ...

  • Page 469

    Warning! (continued) • when leaving the vehicle, always make sure the ignition is in the off position, remove the key fob from the vehicle, and lock the vehicle. • never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dange...

  • Page 470

    • release the shift lever and make sure it is fully seated in the park gate. • look at the transmission gear position display and verify that it indicates the park position (p). • with brake pedal released, verify that the shift lever will not move out of park. Reverse (r) this range is for moving t...

  • Page 471

    Caution! Towing the vehicle, coasting, or driving for any other reason with the transmission in neutral can cause severe transmission damage. Refer to “recreational towing” in “starting and operating” and “towing a disabled vehicle” in “what to do in emergencies” for further information. Drive (d) t...

  • Page 472

    If the transmission becomes extremely hot or is in danger of overheating, the “transmission temperature warning light” may illuminate and the transmission may operate differently until the transmission cools down. Note: use caution when operating a heavily loaded vehicle at low speeds (such as towin...

  • Page 473

    In the event of a momentary problem, the transmission can be reset to regain all forward gears by performing the following steps: 1. Stop the vehicle. 2. Shift the transmission into park. 3. Turn the ignition switch to the off position. 4. Wait approximately 10 seconds. 5. Restart the engine. 6. Shi...

  • Page 474

    You can switch between drive and ers mode at any vehicle speed. When the shift lever is in the drive position, the transmission will operate automatically, shifting between all available gears. Tapping the ers (-) switch (column shift) or tapping the shift lever to the left (-) (console shift) will ...

  • Page 475

    To exit ers mode, simply hold the shift lever to the right (+) (console shift) or press and hold the ers (+) switch (column shift) until the gear limit display disappears from the instrument cluster. Warning! Do not downshift for additional engine braking on a slippery surface. The drive wheels coul...

  • Page 476

    Caution! When using ers for engine braking while descend- ing steep grades, be careful not to overspeed the engine. Apply the brakes as needed to prevent en- gine overspeed. Overdrive operation the automatic transmission includes an electronically controlled overdrive (fourth and fifth gears). The t...

  • Page 477

    The “tow/haul indicator light” will illuminate in the instrument cluster to indicate that tow/haul mode has been activated. Pushing the switch a second time restores normal operation. Normal operation is always the default at engine start-up. If tow/haul mode is desired, the switch must be pushed ea...

  • Page 478

    Note: • the torque converter clutch will not engage, and the transmission will not shift into the top overdrive gear, until the transmission fluid and engine coolant are warm [usually after 1 to 3 miles (2 to 5 km) of driving]. Because top gear is disabled, and the engine speed is higher when the to...

  • Page 479

    Vehicle may be somewhat abrupt. This is a normal condition, and precision shifts will develop within a few hundred miles (kilometers). Only shift from drive to park or reverse when the accelerator pedal is released and the vehicle is stopped. Be sure to keep your foot on the brake pedal when shiftin...

  • Page 480

    When parking on a hill, apply the parking brake before shifting the transmission to park, otherwise the load on the transmission locking mechanism may make it diffi- cult to move the shift lever out of park. As an added precaution, turn the front wheels toward the curb on a downhill grade and away f...

  • Page 481

    Warning! (continued) turn the engine off, and remove the key fob. When the ignition is in the lock/off (key re- moval) position, the transmission is locked in park, securing the vehicle against unwanted movement. • when leaving the vehicle, always make sure the ignition is in the off position, remov...

  • Page 482

    The following indicators should be used to ensure that you have engaged the transmission into the park posi- tion: • when shifting into park, pull the shift lever toward you and move it all the way counterclockwise until it stops. • release the shift lever and make sure it is fully seated in the par...

  • Page 483

    Caution! Towing the vehicle, coasting, or driving for any other reason with the transmission in neutral can cause severe transmission damage. Refer to “recreational towing” in “starting and operating” and “towing a disabled vehicle” in “what to do in emergencies” for further information. Drive (d) t...

  • Page 484

    Note: use caution when operating a heavily loaded vehicle at low speeds (such as towing a trailer up a steep grade, or in stop-and-go traffic) during hot weather. In these conditions, torque converter slip can impose a significant additional heat load on the cooling system. Downshifting the transmis...

  • Page 485

    2. Shift the transmission into park. 3. Turn the ignition switch to the off position. 4. Wait approximately 10 seconds. 5. Restart the engine. 6. Shift into the desired gear range. If the problem is no longer detected, the transmission will return to normal operation. Note: even if the transmission ...

  • Page 486

    To exit ers mode, simply push and hold the ers (+) switch until the gear limit display disappears from the instrument cluster. Warning! Do not downshift for additional engine braking on a slippery surface. The drive wheels could lose their grip and the vehicle could skid, causing a collision or pers...

  • Page 487

    Overdrive operation the automatic transmission includes an electronically controlled overdrive (fifth and sixth gears). The trans- mission will automatically shift into overdrive if the following conditions are present: • the shift lever is in the drive position. • the transmission fluid has reached...

  • Page 488

    The “tow/haul indicator light” will illuminate in the instrument cluster to indicate that tow/haul mode has been activated. Pushing the switch a second time restores normal operation. Normal operation is always the default at engine start-up. If tow/haul mode is desired, the switch must be pushed ea...

  • Page 489

    The upper gears. When the vehicle speed drops or during some accelerations, the clutch automatically disengages. Note: • the torque converter clutch will not engage, until the transmission fluid and engine coolant are warm [usu- ally after 1 to 3 miles (2 to 5 km) of driving]. Because the engine spe...

  • Page 490

    • four-wheel drive low range (4l) this transfer case is intended to be driven in the 2h position for normal street and highway conditions such as dry, hard surfaced roads. When additional traction is required, the 4h and 4l positions can be used to lock the front and rear drive- shafts together and ...

  • Page 491

    Because four-wheel drive provides improved traction, there is a tendency to exceed safe turning and stopping speeds. Do not go faster than road conditions permit. Note: delayed shifts out of four-wheel drive may be experienced due to uneven tire wear, low or uneven tire pressures, excessive vehicle ...

  • Page 492

    4l four-wheel drive low range — this range locks the front and rear driveshafts together forcing the front and rear wheels to rotate at the same speed. Additional traction and maximum pulling power for loose, slippery road surfaces only. Do not exceed 25 mph (40 km/h). Caution! Do not use 4l (low) r...

  • Page 493

    • shifting into or out of 4l is possible with the vehicle completely stopped, however difficulty may occur due to the mating clutch teeth not being properly aligned. Several attempts may be required for clutch teeth alignment and shift completion to occur. The preferred method is with the vehicle ro...

  • Page 494

    This electronically shifted transfer case provides four mode positions: • two-wheel drive high range (2wd) • four-wheel drive lock range (4wd lock) • four-wheel drive low range (4wd low) • neutral (neutral) this electronically shifted transfer case is designed to be driven in the two-wheel drive pos...

  • Page 495

    2. The selected position indicator light will flash until the transfer case completes the shift. 3. When the shift is complete, the indicator light for the selected position will stop flashing and remain on. If one or more shift conditions are not met: 1. The indicator light for the current position...

  • Page 496

    Warning! Always engage the parking brake when powering down the vehicle if the “svc 4wd warning light” is illuminated. Not engaging the parking brake may allow the vehicle to roll, which may cause personal injury. Note: do not attempt to make a shift while only the front or rear wheels are spinning,...

  • Page 497

    For additional information on the appropriate use of each transfer case mode position, see the information below: 2wd rear wheel drive high range — this range is for normal street and highway driving on dry, hard surfaced roads. 4wd lock four-wheel drive lock range — this range maximizes torque to t...

  • Page 498

    Shifting procedure note: • if any of the requirements to select a new transfer case position have not been met, the transfer case will not shift. The position indicator light for the previous posi- tion will remain on and the newly selected position indicator light will continue to flash until all t...

  • Page 499

    2wd or 4wd lock to 4wd low note: when shifting into or out of 4wd low some gear noise may be heard. This noise is normal and is not detrimental to the vehicle or occupants. Shifting can be performed with the vehicle rolling 2 to 3 mph (3 to 5 km/h) or completely stopped. You can use either of the fo...

  • Page 500

    • the ignition switch must be in the on position for a shift to take place and for the position indicator lights to be operable. If the ignition switch is not in the on position, the shift will not take place and no position indicator lights will be on or flashing. Electronically shifted transfer ca...

  • Page 501

    • four-wheel drive low range (4wd low) • neutral (neutral) this electronically shifted transfer case is designed to be driven in the two–wheel drive position (2wd) or four - wheel drive position (4wd auto) for normal street and highway conditions on dry hard surfaced roads). Driving the vehicle in 2...

  • Page 502

    Transfer case position indicator lights the transfer case position indicator lights (4wd, 4low, and 4wd auto) are located in the instrument cluster and indicate the current and desired transfer case selection. When you select a different transfer case posi- tion, the indicator lights will do the fol...

  • Page 503

    Warning! Always engage the parking brake when powering down the vehicle if the “svc 4wd warning light” is illuminated. Not engaging the parking brake may allow the vehicle to roll which may cause personal injury or death. Note: do not attempt to make a shift while only the front or rear wheels are s...

  • Page 504

    For additional information on the appropriate use of each transfer case mode position, see the information below: 2wd rear-wheel drive high range - this range is for normal street and highway driving on dry hard surfaced roads. 4wd auto four-wheel drive auto range - this range sends power to the rea...

  • Page 505

    Shifting procedure note: • if any of the requirements to select a new transfer case position have not been met, the transfer case will not shift. The position indicator light for the previous posi- tion will remain on and the newly selected position indicator light will continue to flash until all t...

  • Page 506

    This electronically shifted transfer case provides five mode positions: • two-wheel drive high range (2wd) • four-wheel drive automatic range (4wd auto) • four-wheel drive lock range (4wd lock) • four-wheel drive low range (4wd low) • neutral (neutral) this electronically shifted transfer case is de...

  • Page 507

    Note: the transfer case neutral position is selected by pushing the recessed button (with a ballpoint pen or similar object) located in the center of the 4wd control switch. The transfer case neutral position is to be used for recreational towing only. Refer to “recreational towing” in “starting and...

  • Page 508

    The “svc 4wd warning light” monitors the electronic shift four-wheel drive system. If this light remains on after engine start up or illuminates during driving, it means that the four-wheel drive system is not function- ing properly and that service is required. Warning! Always engage the parking br...

  • Page 509

    Warning! You or others could be injured or killed if you leave the vehicle unattended with the transfer case in the neutral position without first fully engaging the parking brake. The transfer case neutral position disengages both the front and rear drive shafts from the powertrain and will allow t...

  • Page 510

    Neutral (n) neutral - this range disengages both the front and rear driveshafts from the powertrain. To be used for flat towing behind another vehicle. Refer to “recreational towing” in “starting and operating” for further infor- mation. Shifting procedure note: • if any of the requirements to selec...

  • Page 511

    2wd or 4wd auto or 4wd lock to 4wd low note: when shifting into or out of 4wd low some gear noise may be heard. This noise is normal and is not detrimental to the vehicle or occupants. Shifting can be performed with the vehicle rolling 2 to 3 mph (3 to 5 km/h) or completely stopped. Use either of th...

  • Page 512

    • the ignition switch must be in the on position for a shift to take place and for the position indicator lights to be operable. If the ignition switch is not in the on position, then the shift will not take place and no position indicator lights will be on or flashing. Air suspension system (1500 m...

  • Page 513

    Note: the vehicle will automatically enter aero mode when the vehicle speed remains between 62 mph (100 km/h) and 66 mph (106 km/h) for greater than 20 seconds or if the vehicle speed exceeds 66 mph (106 km/h). • normal ride height (nrh) – this is the standard position of the suspension and is meant...

  • Page 514

    When this occurs. Refer to “electronic vehicle informa- tion center (evic) or driver information display (did)” in “understanding your instrument panel” for further information. • if the vehicle is in offroad1 or offroad2 setting, be aware of your surroundings, you may not have the clearance require...

  • Page 515

    Button once from the nrh while the vehicle speed is below 33 mph (53 km/h). Once the vehicle speed goes below 15 mph (24 km/h) the vehicle height will begin to lower. If the vehicle speed remains between 15 mph (24 km/h) and 25 mph (40 km/h) for greater than 60 seconds, or the vehicle speed exceeds ...

  • Page 516

    After the engine is turned off, it may be noticed that the air suspension system operates briefly, this is normal. The system is correcting the position of the vehicle to ensure a proper appearance. To assist with changing a spare tire, the air suspension system has a feature which allows the automa...

  • Page 517

    Settings” in “understanding your instrument panel” if equipped with a touch screen radio for further informa- tion. Note: this mode is intended to be enabled with engine running. Transport mode to assist with flat bed towing, the air suspension system has a feature which will put the vehicle into en...

  • Page 518

    Your instrument panel” or “uconnect® settings” in “un- derstanding your instrument panel” if equipped with a touch screen radio for further information. Note: if equipped with a touch screen radio all enabling/disabling of air suspension features must be done through the radio. Refer to “uconnect® s...

  • Page 519

    The indicator lamps 3 through 6 will illuminate to show the current position of the vehicle. Flashing indicator lamps will show a position which the system is working to achieve. When raising, if multiple indicator lamps are flashing, the highest flashing indicator lamp is the posi- tion the system ...

  • Page 520

    • entry/exit mode – indicator lamp 3 will be illumi- nated when the vehicle is in entry exit mode. Entry/ exit mode can be requested up to 33 mph (53 km/h). If vehicle speed is reduced to, and kept below, 15 mph (24 km/h) indicator lamp 4 will flash and indicator lamp 3 will remain solid until entry...

  • Page 521

    Normal ride height (nrh) – this is the standard position of the suspension and is meant for normal driving. Trailer mode (lowers the vehicle approximately 1 in (25 mm) – this position will lower the rear suspension and provide load leveling for all loading conditions including towing a trailer. Afte...

  • Page 522

    To be disabled. This mode is intended to be used with engine running. Refer to “electronic vehicle information center (evic) or driver information display (did)” in “understanding your instrument panel” or “uconnect® settings” in “understanding your instrument panel” if equipped with a touch screen ...

  • Page 523

    Protection mode in order to “protect” the air suspension system, the vehicle will enter protection mode when load leveling cannot be achieved. Some driving may be required to clear the protection mode telltale in the evic/did. Refer to “electronic vehicle information center (evic) or driver informat...

  • Page 524

    Note: the led will continuously blink until normal ride height (nrh) has been achieved. • transport mode – no indicator lamps will be illumi- nated. Transport mode is disabled by driving the vehicle. • tire/jack mode – no indicator lamps will be illumi- nated. Tire/jack mode is disabled by driving t...

  • Page 525

    The locking axles are controlled by the axle locker switch. The switch has three positions, axle unlock, rear lock, and front/rear lock. Under normal driv- ing conditions, the switch should be left in the axle unlock position. In the axle unlock position, the front and rear axles are unlocked. In th...

  • Page 526

    Warning! Do not use the locked axle position for normal driving. A locked front axle is intended for off-road driving only. Locking the front axle during on-road driving will reduce the steering ability. This could cause a collision and you may be seriously injured. To lock the front axle; move the ...

  • Page 527

    Advantage to increasing ride height is the positive effect it has on approach/departure and break over angles. This system is controlled by the electronic control sway bar switch located on the instrument panel. The switch has two positions; on-road and off-road. The system is normally in the on-roa...

  • Page 528

    To disconnect the stabilizer/sway bar, shift to either 4hi or 4lo as shown in “four wheel drive operation” and press the right hand off road stabilizer/sway bar button to obtain the off-road position. The amber indicator light will flash until the stabilizer/sway bar has been fully disconnected. Not...

  • Page 529

    Agency to determine the designated off-road vehicle (orv) trails or recreation areas. You should always tread lightly and only use established roads, trails or orv recreational areas. The national forest service, bureau of land management or local department of natural re- sources are a wealth of in...

  • Page 530

    Caution! The door sill height is 25 inches. Water may intrude into the interior of the vehicle at greater depths. Simultaneous brake and throttle operation many off-road driving conditions require the simultane- ous use of the brake and throttle (two footed driving). When climbing rocks, logs, or ot...

  • Page 531

    Warning! Always wear your seat belt and firmly tie down cargo. Unsecured cargo can become projectiles in an off-road situation. When to use low range when driving off-road, shift into 4l (low range) for additional traction or to improve handling and control on slippery or difficult terrain. Due to t...

  • Page 532

    Caution! On icy or slippery roads, do not downshift at high engine rpms or vehicle speeds because engine brak- ing may cause skidding and loss of control. • mud – deep mud creates a great deal of suction around the tires and is very difficult to get through. You should use 4l (low range) with a gear...

  • Page 533

    Caution! Reduced tire pressures may cause tire unseating and total loss of air pressure. To reduce the risk of tire unseating, while at a reduced tire pressure, reduce your speed and avoid sharp turns or abrupt maneuvers. Crossing obstacles (rocks and other high points) while driving off road, you w...

  • Page 534

    Crossing large rocks when approaching large rocks, choose a path which ensures you drive over the largest with your tires. This will lift your undercarriage over the obstacle. The tread of the tire is tougher and thicker than the side wall and is designed to take the abuse. Always look ahead and mak...

  • Page 535

    Crossing logs to cross a log, approach it at a slight angle (approxi- mately 10 to 15 degrees). This allows one front tire to be on top of the log while the other just starts to climb the log. While climbing the log, modulate your brake and accelerator to avoid spinning the log out from under your t...

  • Page 536

    Hill climbing hill climbing requires good judgment and a good under- standing of your abilities and your vehicle’s limitations. Hills can cause serious problems. Some are just too steep to climb and should not be attempted. You should always feel confident with the vehicle and your abilities. You sh...

  • Page 537

    Warning! Never attempt to climb a hill at an angle or turn around on a steep grade. Driving across an incline increases the risk of a roll over, which may result in severe injury or death. • driving down hill – before driving down a steep hill you need to determine if it is too steep for a safe desc...

  • Page 538

    Warning! Driving across an incline increases the risk of a rollover, which may result in severe injury. • if you stall or begin to lose headway – if you stall or begin to lose headway while climbing a steep hill, allow your vehicle to come to a stop and immediately apply the brake. Restart the engin...

  • Page 539

    Your vehicle’s abilities and be able to recover it if something goes wrong. You should never stop or shut a vehicle off when crossing deep water unless you ingested water into the engine air intake. If the engine stalls do not attempt to restart it. Determine if it has ingested water first. The key ...

  • Page 540

    Crossing is the water depth, current and bottom con- ditions. On soft bottoms the vehicle will sink in, effectively increasing the water level on the vehicle. Be sure to consider this when determining the depth and the ability to safely cross. • crossing puddles, pools, flooded areas or other standi...

  • Page 541

    The water is deep enough to push on the large surface area of the vehicle’s body. Before you proceed determine the speed of the current, the water’s depth, approach angle, bottom condition and if there are any obstacles, then cross at an angle heading slightly upstream using the low and slow techniq...

  • Page 542

    Vehicle recovery if you drive off-road, you may encounter a situation where you will need to recover your vehicle. Vehicle recovery should always be given consideration before attempting a questionable obstacle. You should never go off-road driving without the ability to recover your vehicle from a ...

  • Page 543

    • rock cycling your vehicle – rock cycling your ve- hicle is one of the easiest, fastest and most commonly used methods. This simply involves shifting your vehicle from drive to reverse, while applying throttle after each shift. During this process, for addi- tional traction, try turning your steeri...

  • Page 544

    Wood dowel. This will keep the straps from becoming knotted and is safer than using a clevis pin if the strap breaks. Next have the tow vehicle backup, leaving two to three feet worth of slack in the strap. Then the tow vehicle, using light throttle, should accelerate tighten- ing the strap providin...

  • Page 545

    Out of the situation in a slow controlled manner. This control works well for avoiding further vehicle dam- age. Once you decide it is time to use the winch look for a good anchor point. It needs to be strong enough to hold more than the vehicle’s weight and provide a direction of pull as straight a...

  • Page 546

    After driving off-road off-road operation puts more stress on your vehicle than does most on-road driving. After going off-road, it is always a good idea to check for damage. That way you can get any problems taken care of right away and have your vehicle ready when you need it. • completely inspect...

  • Page 547

    • if you experience unusual vibration after driving in mud, slush or similar conditions, check the wheels for impacted material. Impacted material can cause a wheel imbalance and freeing the wheels of it will correct the situation. Limited-slip differential the limited-slip differential provides add...

  • Page 548

    Driving on slippery surfaces acceleration rapid acceleration on snow covered, wet, or other slip- pery surfaces may cause the driving wheels to pull erratically to the right or left. This phenomenon occurs when there is a difference in the surface traction under the rear (driving) wheels. Warning! R...

  • Page 549

    Your vehicle may be equipped with a limited slip differential (lsd) that reduces, but does not eliminate, the amount of wheel slip across a given axle for im- proved handling. Driving through water driving through water more than a few inches/ centimeters deep will require extra caution to ensure sa...

  • Page 550

    Warning! (continued) distances. Therefore, after driving through stand- ing water, drive slowly and lightly press on the brake pedal several times to dry the brakes. • failure to follow these warnings may result in injuries that are serious or fatal to you, your pas- sengers, and others around you. ...

  • Page 551

    Off-road driving tips care should be taken when attempting to climb steep hills or driving diagonally across a hill or slope. If natural obstacles force you to travel diagonally up or down a hill, choose a mild angle and keep as little side tilt as possible. Keep the vehicle moving and make turns sl...

  • Page 552

    • after extended operation in mud, sand, water, or similar dirty conditions, have the radiator, fan, brake rotors, wheels, brake linings, and axle yokes inspected and cleaned as soon as possible. Warning! Abrasive material in any part of the brakes may cause excessive wear or unpredictable braking. ...

  • Page 553

    2. Attach the hook to a suitable anchor point. Caution! Be certain the anchor will withstand the load re- quired to tension the wire rope. 3. Apply at least 500 lbs (227 kg) of tension to the rope while winding the rope. Always use care to ensure the rope does not pile up on one side of the drum and...

  • Page 554

    Understanding the features of your winch winch components 552 starting and operating.

  • Page 555

    1. Motor: the winch motor is powered by the vehicle charging system and features a thermal protection switch that automatically stops motor function in the power-in direction if the motor gets too hot. 2. Remote socket: the remote socket allows the remote control to be attached to the control pack t...

  • Page 556

    Winch accessories the following accessories are necessary to attach the winch to anchors, change direction of pull, and for safe winching. Gloves: wire rope, through use, will develop ⬙barbs⬙ which can slice skin. It is ex- tremely important to wear pro- tective gloves while operating the winch or h...

  • Page 557

    Clevis/d-shackles: the d-shackle is a safe means of connecting the looped ends of cables, straps and snatch blocks. The shackle’s pin is threaded to allow easy removal. Tree trunk protector: typi- cally made of tough, high- quality nylon, it provides the operator an attachment point for the winch ro...

  • Page 558

    Warning! (continued) • always stand clear of wire rope and load and keep others away during winching. • always keep hands and clothing clear of the wire rope, hook and fairlead opening during operation and when spooling. • never wrap wire rope back onto itself. Always use a choker chain, wire choker...

  • Page 559

    • use the right equipment for the situation. • always wear leather gloves and do not allow the wire rope to slip through your hands when handling the rope. • only the operator should handle the wire rope and remote control. • think safety at all times. Vehicle recovery using the winch caution! • alw...

  • Page 560

    1. Inspect the winch, winch mount, and wire rope for damage. Do not use the winch if the mount is loose or rope shows excessive wear or damage. 2. Put on gloves. 3. Disengage the clutch to allow free spooling of the winch drum, rotate the clutch lever on the winch to disengage. Freespooling conserve...

  • Page 561

    4. Free the winch hook and attach the hook strap. Free the winch hook from its anchor point. Attach the hook strap to the hook (if not attached). 5. Pull the wire to the anchor point. Pull out enough wire rope to reach your anchor point. Be sure to keep a certain amount of tension on the wire as it ...

  • Page 562

    Caution! Always be certain the anchor you select will with- stand the load. Note: how to choose an anchor point: a secure anchor is critical to winching operations. An anchor must be strong enough to hold while winching. Natural anchors include trees, stumps and rocks. Hook the cable as low as possi...

  • Page 563

    8. Lock the clutch. Lock the winch drum by rotating the clutch lever on the winch to engage. Note: always ensure the clutch is fully engaged or disengaged. 9. Connect the remote control to the winch control box, located behind the front bumper. Be careful not to let the remote control cord dangle in...

  • Page 564

    10. Put wire rope under tension. Using the remote con- trol switch, slowly wind the wire rope until no slack remains. Once the wire rope is under tension, stand well clear of it and never step over it. 11. Check your anchor. Make sure all connections are secured and free of debris before continuing ...

  • Page 565

    In certain situations you may decide to throw a heavy blan- ket or similar object over the wire rope. A heavy blanket can absorb energy should the wire rope break. Place it on the wire rope midway be- tween the winch and the an- chor point. Do this before the wire rope is put under ten- sion. Do not...

  • Page 566

    14. Begin winching. With the winching vehicles engine on and light tension already on the wire rope, begin winching slowly and steadily. Be sure that the wire rope is winding evenly and tightly around the spool- ing drum. For additional assistance, the winched vehicle can be slowly driven while bein...

  • Page 567

    Note: • avoid overheating the winch motor. For extended winching, stop at reasonable intervals to allow the winch motor to cool down. • what to look for under load: the wire rope must always spool onto the drum as indicated by the drum rotation decal on the winch. As you power-in, make sure the wire...

  • Page 568

    Warning! To prevent serious injury, never put your fingers inside the hook area as you are powering-in. Note: how to spool under no load: arrange the re- mote control lead so it cannot be caught in the winch. Arrange the wire rope so it will not kink or tangle when spooled. Be sure any wire rope alr...

  • Page 569

    19. Disconnect the remote control. Disconnect the remote control cord from the control box and store in a clean and dry place. Winching operations are now com- plete. Put the cap on the solenoid plug-in. Note: always store the remote control in a protected, clean, dry area. Rigging techniques variou...

  • Page 570

    How to change the pulling direction all winching operations should have a straight line from the winch to the object being pulled. This minimizes the wire rope collecting on one side of the drum affecting pulling efficiency and damaging wire rope. A snatch block, secured to a point directly in front...

  • Page 571

    Double line because pulling power decreases with the number of layers of wire rope on the winch drum, you can use a snatch block to double line out more wire rope. This decreases the number of layers of wire rope on the drum, and increases pulling power. Start by feeding out enough wire rope to free...

  • Page 572

    The electric steering system experiences a fault that prevents it from providing assist, you will still have the ability to steer the vehicle manually. If the steering icon is flashing, it indicates that the vehicle needs to be taken to the dealer for service. It is likely the vehicle has lost power...

  • Page 573

    Hydraulic power steering — 2500/3500 models the standard power steering system will give you good vehicle response and increased ease of maneuverability in tight spaces. The system will provide mechanical steering capability if power assist is lost. If for some reason the power assist is interrupted...

  • Page 574

    Caution! Do not use chemical flushes in your power steering system as the chemicals can damage your power steering components. Such damage is not covered by the new vehicle limited warranty. Warning! Fluid level should be checked on a level surface and with the engine off to prevent injury from movi...

  • Page 575

    When the parking brake is applied with the ignition switch on, the “brake warning light” in the instrument cluster will illuminate. Note: • when the parking brake is applied and the transmis- sion is placed in gear, the “brake warning light” will flash. If vehicle speed is detected, a chime will sou...

  • Page 576

    Warning! • never use the park position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle move- ment and possible injury or damage. • never leave children alone in a vehicle, or with access to an unlocked vehicle. Leaving unattended child...

  • Page 577

    Brake system if power assist is lost for any reason (for example, repeated brake applications with the engine off), the brakes will still function. However, you will experience a substantial increase in braking effort to stop the vehicle. If either the front or rear hydraulic system loses normal bra...

  • Page 578

    Anti-lock brake system (abs) the four-wheel anti-lock brake system (abs) is de- signed to aid the driver in maintaining vehicle control under adverse braking conditions. The system operates with a separate computer to modulate hydraulic pressure to prevent wheel lockup and help avoid skidding on sli...

  • Page 579

    Warning! (continued) efficiency beyond that afforded by the condition of the vehicle brakes and tires or the traction afforded. • the abs cannot prevent collisions, including those resulting from excessive speed in turns, following another vehicle too closely, or hydroplaning. • the capabilities of ...

  • Page 580

    Applies optimum pressure to the brakes. The system applies optimum pressure to the brakes in emergency braking conditions. This can help reduce braking dis- tances. The bas complements the abs. Applying the brakes very quickly results in the best bas assistance. To receive the benefit of bas, you mu...

  • Page 581

    During operation, hsa will activate the brake control system and a clicking noise may occur. If your foot is on the brake pedal during operation you may feel a slight pedal movement. The clicking and pedal movement is normal and both will stop when hsa becomes inactive. Hsa activation criteria the f...

  • Page 582

    Towing and hauling with hsa the hsa system does not know if your vehicle is loaded or towing a trailer unless the tow/haul switch, lo- cated on the center stack, is selected. When activated, the “tow/haul indicator light” will illuminate in the instrument cluster. Refer to “automatic transmission” i...

  • Page 583

    Warning! (continued) • hsa is not a parking brake. If you stop the vehicle on a hill without putting the transmission in park or using the parking brake, it will roll down the incline and could collide with another vehicle, object or person, and cause serious or fatal injury. Always remember to use ...

  • Page 584

    Warning! Electronic stability control (esc) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. Esc cannot prevent accidents, in- cluding those resulting from excessive speed in turns, driving on very slipper...

  • Page 585

    Described in the tcs section, has been disabled and the ⬙esc off indicator light⬙ will be illuminated. All other stability features of esc function normally. This mode is intended to be used if the vehicle is in deep snow, sand, or gravel conditions and more wheel spin than tcs would normally allow ...

  • Page 586

    All four-wheel drive vehicles in 4wd auto and 4wd lock modes can also choose the following esc operating mode. This is the only selectable esc operating mode in 4wd low: esc full off this mode is intended for off-road use when esc stabil- ity features could inhibit vehicle maneuverability due to tra...

  • Page 587

    Warning! In the ⴖesc full offⴖ mode, the engine torque reduc- tion and stability features are disabled. Therefore, the enhanced vehicle stability offered by esc is unavailable. In an emergency evasive maneuver the esc system will not engage to assist in maintaining stability. “esc full off” mode is ...

  • Page 588

    Note: • the “esc activation/malfunction indicator light” and the “esc off indicator light” come on momen- tarily each time the ignition switch is turned on. • each time the ignition is turned on, the esc system will be on even if it was turned off previously. Except for when the vehicle is started w...

  • Page 589

    Tsc is only active in the default “esc on” mode. Tsc can be disabled by pushing the “esc off” switch and entering “esc partial off” mode. It is not active in the “esc partial off” or “esc full off” modes. Refer to the esc portion of this section for an explanation of the different esc operating mode...

  • Page 590

    Activating hdc once hdc is enabled it will activate automatically if driven down a grade of sufficient magnitude (greater than approximately 8%). The set speed for hdc is selectable by the driver, and can be adjusted by using the electronic range switches located on steering column shifter. The foll...

  • Page 591

    Driver override: the driver may override hdc activation with throttle or brake application at anytime. Deactivating hdc hdc will be deactivated but remain available if any of the following conditions occur: • driver overrides hdc set speed with throttle or brake application. • vehicle speed exceeds ...

  • Page 592

    Feedback to the driver: the instrument cluster has a hdc icon and a hdc switch which has an led which offers feedback to the driver about the state hdc is in. • while hdc is enabled or active the gear position typically associated with ers manual mode will indi- cate target set speed not the top gea...

  • Page 593

    Tire safety information tire markings note: • p (passenger) — metric tire sizing is based on u.S. Design standards. P-metric tires have the letter “p” molded into the sidewall preceding the size designa- tion. Example: p215/65r15 95h. • european — metric tire sizing is based on european design stand...

  • Page 594

    • temporary spare tires are designed for temporary emergency use only. Temporary high pressure com- pact spare tires have the letter “t” or “s” molded into the sidewall preceding the size designation. Example: t145/80d18 103m. • high flotation tire sizing is based on u.S. Design standards and it beg...

  • Page 595

    Example: r = construction code – ⬙r⬙ means radial construction, or – ⬙d⬙ means diagonal or bias construction 15, 16, 18 = rim diameter in inches (in) service description: 95 = load index – a numerical code associated with the maximum load a tire can carry h = speed symbol – a symbol indicating the r...

  • Page 596

    Example: load identification: absence of the following load identification symbols on the sidewall of the tire indicates a standard load (sl) tire: • xl = extra load (or reinforced) tire, or • ll = light load tire or • c, d, e, f, g = load range associated with the maximum load a tire can carry at a...

  • Page 597

    Example: dot ma l9 abcd 0301 dot = department of transportation – this symbol certifies that the tire is in compliance with the u.S. Department of transportation tire safety standards and is approved for highway use ma = code representing the tire manufacturing location (two digits) l9 = code repres...

  • Page 598

    Tire terminology and definitions term definition b-pillar the vehicle b-pillar is the structural member of the body lo- cated behind the front door. Cold tire inflation pressure cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least three hour...

  • Page 599

    Tire loading and tire pressure tire and loading information placard location note: the proper cold tire inflation pressure is listed on the driver’s side b-pillar or the rear edge of the driver’s side door. Example tire placard location (door) example tire placard location (b-pillar) 5 starting and ...

  • Page 600

    Tire and loading information placard this placard tells you important information about the: 1. Number of people that can be carried in the vehicle. 2. Total weight your vehicle can carry. 3. Tire size designed for your vehicle. 4. Cold tire inflation pressures for the front, rear, and spare tires. ...

  • Page 601

    Xxx kg” on the tire and loading information placard. The combined weight of occupants, cargo/luggage and trailer tongue weight (if applicable) should never exceed the weight referenced here. Steps for determining correct load limit 1. Locate the statement “the combined weight of occu- pants and carg...

  • Page 602

    600 starting and operating.

  • Page 603

    Warning! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. Tires — general information tire pressure proper tire inflation pressur...

  • Page 604

    Warning! (continued) • unequal tire pressures from one side of the vehicle to the other can cause the vehicle to drift to the right or left. • always drive with each tire inflated to the recom- mended cold tire inflation pressure. Both under-inflation and over-inflation affect the stability of the v...

  • Page 605

    At least once a month: • check and adjust tire pressure with a good quality pocket-type pressure gauge. Do not make a visual judgement when determining proper inflation. Tires may look properly inflated even when they are under- inflated. • inspect tires for signs of tire wear or visible damage. Cau...

  • Page 606

    Tire pressure may increase from 2 to 6 psi (13 to 40 kpa) during operation. Do not reduce this normal pressure build up or your tire pressure will be too low. Tire pressures for high speed operation the manufacturer advocates driving at safe speeds and within posted speed limits. Where speed limits ...

  • Page 607

    Tire repair if your tire becomes damaged, it may be repaired if it meets the following criteria: • the tire has not been driven on when flat. • the damage is only on the tread section of your tire (sidewall damage is not repairable). • the puncture is no greater than a ¼ of an inch (6 mm). Consult a...

  • Page 608

    Summer tires do not contain the all season designation or mountain/snowflake symbol on the tire sidewall. Use summer tires only in sets of four; failure to do so may adversely affect the safety and handling of your vehicle. Warning! Do not use summer tires in snow/ice conditions. You could lose vehi...

  • Page 609

    While studded tires improve performance on ice, skid and traction capability on wet or dry surfaces may be poorer than that of non-studded tires. Some states pro- hibit studded tires; therefore, local laws should be checked before using these tire types. Run flat tires — if equipped run flat tires a...

  • Page 610

    Equipment tire and wheel found on the front or rear axle of your vehicle. This spare tire may be used in the tire rotation for your vehicle. If your vehicle has this option, refer to an authorized tire dealer for the recommended tire rotation pattern. Compact spare tire — if equipped the compact spa...

  • Page 611

    Full size spare — if equipped the full size spare is for temporary emergency use only. This tire may look like the originally equipped tire on the front or rear axle of your vehicle, but it is not. This spare tire may have limited tread life. When the tread is worn to the tread wear indicators, the ...

  • Page 612

    Tire spinning when stuck in mud, sand, snow, or ice conditions, do not spin your vehicle’s wheels above 30 mph (48 km/h) or for longer than 30 seconds continuously without stop- ping. Refer to “freeing a stuck vehicle” in “what to do in emergencies” for further information. Warning! Fast spinning ti...

  • Page 613

    These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tread depth becomes a 1/16 of an inch (2 mm). When the tread is worn to the tread wear indicators, the tire should be replaced. Refer to “replacement tires” in this section for further information. L...

  • Page 614

    Wear and correct cold tire inflation pressures. The manu- facturer strongly recommends that you use tires equiva- lent to the originals in size, quality and performance when replacement is needed. Refer to the paragraph on “tread wear indicator”. Refer to the tire and loading information placard or ...

  • Page 615

    Warning! (continued) • never use a tire with a smaller load index or capacity, other than what was originally equipped on your vehicle. Using a tire with a smaller load index could result in tire overloading and failure. You could lose control and have a collision. • failure to equip your vehicle wi...

  • Page 616

    Please follow the table below for proper tire size, chain type, and axle recommendations: vehicle axle recommendations tire sizes chain class 1500 models rear only p265/70r17 s class 2500 models rear only lt245/70r17e lt265/70r18e lt275/70r18e u class 2500 power wagon mod- els rear only lt285/70r17d...

  • Page 617

    Warning! Using tires of different size and type (m+s, snow) between front and rear axles can cause unpredictable handling. You could lose control and have a collision. Caution! To avoid damage to your vehicle or tires, observe the following precautions: • because of restricted traction device cleara...

  • Page 618

    Tire rotation recommendations tires on the front and rear axles of vehicles operate at different loads and perform different steering, driving, and braking functions. For these reasons, they wear at unequal rates. These effects can be reduced by timely rotation of tires. The benefits of rotation are...

  • Page 619

    Directional tires — if equipped for the r/t package with 22” tires and wheels, the rotational direction of the tire must be taken into consid- eration when rotating the tires. The recommended rota- tion pattern for directional tires is shown below. Dual rear wheels — if equipped the tires used on du...

  • Page 620

    Note: if your vehicle is equipped with a tire pressure information system (tpis): • the tire pressure information system (tpis) uses unique sensors in the inner rear wheels to help identify them from the outer rear wheels, because of this, the inner and outer wheel locations can’t be switched. • aft...

  • Page 621

    Tire pressure monitor system (tpms) the tire pressure monitor system (tpms) will warn the driver of a low tire pressure based on the vehicle recom- mended cold placard pressure. The tire pressure will vary with temperature by about 1 psi (7 kpa) for every 12°f (6.5°c). This means that when the outsi...

  • Page 622

    For example, your vehicle may have a recommended cold (parked for more than three hours) placard pressure of 30 psi (207 kpa). If the ambient temperature is 68°f (20°c) and the measured tire pressure is 27 psi (186 kpa), a temperature drop to 20°f (-7°c) will decrease the tire pressure to approximat...

  • Page 623

    Note: • the tpms is not intended to replace normal tire care and maintenance or to provide warning of a tire failure or condition. • the tpms should not be used as a tire pressure gauge while adjusting your tire pressure. • driving on a significantly under-inflated tire causes the tire to overheat a...

  • Page 624

    • various tpms messages, which display in the elec- tronic vehicle information center (evic)/driver in- formation display (did) • tpm telltale light the matching full size spare wheel and tire assembly (if equipped) has a tpm sensor. The full size spare can be used in place of any of the four road t...

  • Page 625

    Vehicle’s recommended cold placard pressure inflation value as shown in the ⬙inflate to xx⬙ message. Once the system receives the updated tire pressures, the system will automatically update, the graphic display in the evic/did will return to it’s original color, and the “tire pressure monitoring te...

  • Page 626

    System ⬙ message will no longer display, and a pressure value will display in place of the dashes. A system fault can occur due to any of the following: • signal interference due to electronic devices or driving next to facilities emitting the same radio frequencies as the tpm sensors. • installing ...

  • Page 627

    Vehicles with non matching full size spare or com- pact spare • the non matching full size spare or compact spare tire does not have a tpm sensor. Therefore, the tpms will not monitor the pressure in the non matching full size spare or compact spare tire. • if you install the non matching full size ...

  • Page 628

    Tire pressure information system (tpis) 3500 series trucks your vehicle may be equipped with a tire pressure information system (tpis). The tire pressure information system (tpis) uses wire- less technology with wheel rim mounted electronic sen- sors to transmit tire pressure levels. Sensors mounted...

  • Page 629

    Will no longer be displayed, and a pressure value will display in place of the dashes. A system fault can occur due to any of the following: • signal interference due to electronic devices or driving next to facilities emitting the same radio frequencies as the tpm sensors. • installing aftermarket ...

  • Page 630

    Light spark knock at low engine speeds is not harmful to your engine. However, continued heavy spark knock at high engine speeds can cause damage and immediate service is required. Poor quality gasoline can cause problems such as hard starting, stalling, and hesitations. If you experience these symp...

  • Page 631

    Reformulated gasoline many areas of the country require the use of cleaner burning gasoline referred to as “reformulated gasoline.” reformulated gasoline contain oxygenates and are spe- cifically blended to reduce vehicle emissions and im- prove air quality. The use of reformulated gasoline is recom...

  • Page 632

    E-85 usage in non-flex fuel vehicles non-flex fuel vehicles (ffv) are compatible with gaso- line containing up to 10% ethanol (e10). Gasoline with higher ethanol content may void the new vehicle lim- ited warranty. If a non-ffv vehicle is inadvertently fueled with e-85 fuel, the engine will have som...

  • Page 633

    Materials added to fuel besides using unleaded gasoline with the proper octane rating, gasolines that contain detergents, corrosion and stability additives are recommended. Using gasolines that have these additives will help improve fuel economy, reduce emissions, and maintain vehicle perfor- mance....

  • Page 634

    Caution! (continued) • the use of fuel additives, which are now being sold as octane enhancers, is not recommended. Most of these products contain high concentrations of methanol. Fuel system damage or vehicle perfor- mance problems resulting from the use of such fuels or additives is not the respon...

  • Page 635

    Warning! (continued) • guard against carbon monoxide with proper main- tenance. Have the exhaust system inspected every time the vehicle is raised. Have any abnormal conditions repaired promptly. Until repaired, drive with all side windows fully open. Flexible fuel (3.6l engine only) — if equipped e...

  • Page 636

    Fuel requirements your vehicle will operate on both unleaded gasoline with any octane rating, or solely e-85 fuel, or any mixture of these fuels. For best results, avoid refueling pattern alternating between e-85 and unleaded gasoline. When switching fuel types: • add 5 gallons (19 liters) or more w...

  • Page 637

    That engine oils that are api certified and meet the requirements of material standard ms-6395 be used. Ms-6395 contains additional requirements, developed during extensive fleet testing, to provide additional pro- tection to fca us llc engines. Starting the characteristics of e-85 fuel make it unsu...

  • Page 638

    Maintenance caution! Do not use ethanol mixture greater than 85% in your vehicle. It will cause difficulty in cold starting and may affect drivability. Adding fuel the fuel filler cap (gas cap) is located behind the fuel filler door, on the left side of the vehicle. Open the fuel door and remove the...

  • Page 639

    Caution! • damage to the fuel system or emissions control system could result from using an improper fuel tank filler tube cap. • a poorly fitting fuel filler cap could let impurities into the fuel system. • a poorly fitting fuel filler cap may cause the “malfunction indicator light (mil)” to turn o...

  • Page 640

    Warning! Static electricity can cause an ignition of flammable liquid, vapor or gas in any vehicle or trailer. To reduce risk of serious injury or death when filling containers: • always place container on the ground before fill- ing. • keep the pump nozzle in contact with the container when you are...

  • Page 641

    Vehicle loading certification label as required by national highway traffic safety admin- istration regulations, your vehicle has a certification label affixed to the driver’s side door or pillar. This label contains the month and year of manufacture, gross vehicle weight rating (gvwr), gross axle w...

  • Page 642

    Tire size the tire size on the vehicle certification label represents the actual tire size on your vehicle. Replacement tires must be equal to the load capacity of this tire size. Rim size this is the rim size that is appropriate for the tire size listed. Inflation pressure this is the cold tire inf...

  • Page 643

    Improper weight distributions can have an adverse effect on the way your vehicle steers and handles and the way the brakes operate. Caution! Do not load your vehicle any heavier than the gvwr or the maximum front and rear gawr. If you do, parts on your vehicle can break, or it can change the way you...

  • Page 644

    Gross trailer weight (gtw) the gtw is the weight of the trailer plus the weight of all cargo, consumables and equipment (permanent or tem- porary) loaded in or on the trailer in its ⬙loaded and ready for operation ⬙ condition. The recommended way to measure gtw is to put your fully loaded trailer on...

  • Page 645

    Tongue weight (tw) the tongue weight is the downward force exerted on the hitch ball by the trailer. The recommended tongue weight is 10% to 15% of the vehicle’s gtw for a conventional hitch. You must consider this as part of the load on your vehicle. Frontal area the frontal area is the maximum hei...

  • Page 646

    Brake control, thereby enhancing towing safety. The addi- tion of a friction/hydraulic sway control also dampens sway caused by traffic and crosswinds and contributes positively to tow vehicle and trailer stability. Trailer sway control and a weight distributing (load equalizing) hitch are recommend...

  • Page 647

    With weight-distributing hitch (correct) improper adjustment of weight-distributing hitch (incorrect) 5 starting and operating 645.

  • Page 648

    Recommended distribution hitch adjustment towing with 1500 air suspension 1. Set air suspension to normal ride height. No action is required if already in normal ride height. Note: the vehicle must remain in the engine running position while attaching a trailer for proper leveling of the air suspens...

  • Page 649

    7. Install and adjust the tension in the weight distribut- ing bars so that the height of the front fender is approximately (h2-h1)/3+h1 (about 1/3 the differ- ence between h2 and h1 above normal ride height [h1]). 8. The truck can now be driven. Jack mode will be canceled and vehicle will return to...

  • Page 650

    4. Measure the height of the top of the front wheel opening on the fender to ground, this is height h2. 5. Install and adjust the tension in the weight distribut- ing bars so that the height of the front fender is approximately (h2-h1)/2+h1 (about 1/2 the differ- ence between h2 and h1 above normal ...

  • Page 651

    Trailer hitch type and maximum trailer weight hitch type max. Trailer weight / max. Tongue weight class iii bumper hitch - 1500 model 5,000 lbs (2,268 kg) / 500 lbs (226 kg) class iv - 1500 model 11,000 lbs (4,989 kg) / 1100 lbs (498 kg) class v - 2500/3500 models 18,000 lbs (8,164 kg) / 1800 lbs (8...

  • Page 652

    Trailer and tongue weight always load a trailer with 60% of the weight in the front of the trailer. This places 10% of the gtw on the tow hitch of your vehicle. Loads balanced over the wheels or heavier in the rear can cause the trailer to sway severely side to side which will cause loss of control ...

  • Page 653

    Consider the following items when computing the weight on the rear axle of the vehicle: • the tongue weight of the trailer • the weight of any other type of cargo or equipment put in or on your vehicle • the weight of the driver and all passengers note: remember that everything put into or on the tr...

  • Page 654

    Warning! Improper towing can lead to a collision. Follow these guidelines to make your trailer towing as safe as possible: • make certain that the load is secured in the trailer and will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may ...

  • Page 655

    Warning! (continued) 3. Gawr 4. Tongue weight rating for the trailer hitch utilized. Towing requirements — tires • do not attempt to tow a trailer while using a compact spare tire. • proper tire inflation pressures are essential to the safe and satisfactory operation of your vehicle. Refer to “tires...

  • Page 656

    Caution! If the trailer weighs more than 1,000 lbs (454 kg) loaded, it should have its own brakes and they should be of adequate capacity. Failure to do this could lead to accelerated brake lining wear, higher brake pedal effort, and longer stopping distances. • do not interconnect the hydraulic bra...

  • Page 657

    The user interface consists of the following: manual brake control lever slide the manual brake control lever to the left to activate power to the trailer’s electric brakes independent of the tow vehicle’s brakes. If the manual brake control lever is activated while the brake is also applied, the gr...

  • Page 658

    If a fault is detected in the trailer wiring or the integrated trailer brake module (itbm), the “trailer brake status indicator light” will flash. Gain adjustment buttons (+/-) pressing these buttons will adjust the brake control power output to the trailer brakes in 0.5 increments. The gain setting...

  • Page 659

    4. Press the up or down button on the steering wheel until “trailer tow” appears on the screen. 5. Press the right arrow on the steering wheel to enter “trailer tow”. 6. Press the up or down buttons until trailer brake type appears on the screen. 7. Press the right arrow and then press the up or dow...

  • Page 660

    * the suggested selection depends and may change depending on the customer preferences for braking per- formance. Condition of the trailer brakes, driving and road state may also affect the selection. Display messages the trailer brake control interacts with the electronic vehicle information center...

  • Page 661

    Note: • an aftermarket controller may be available for use with trailers with air or electric-over-hydraulic trailer brake systems. To determine the type of brakes on your trailer and the availability of controllers, check with your trailer manufacturer or dealer. • removal of the itbm will cause er...

  • Page 662

    Four-pin connector 1 — female pins 4 — park 2 — male pin 5 — left stop/turn 3 — ground 6 — right stop/turn seven-pin connector 1 — battery 5 — ground 2 — backup lamps 6 — left stop/turn 3 — right stop/turn 7 — running lamps 4 — electric brakes 660 starting and operating.

  • Page 663

    Towing tips before setting out on a trip, practice turning, stopping and backing the trailer up in an area away from heavy traffic. Automatic transmission the drive range can be selected when towing. The transmission controls include a drive strategy to avoid frequent shifting when towing. However, ...

  • Page 664

    Electronic speed control — if equipped • do not use in hilly terrain or with heavy loads. • when using the speed control, if you experience speed drops greater than 10 mph (16 km/h), disengage until you can get back to cruising speed. • use speed control in flat terrain and with light loads to maxim...

  • Page 665

    Snowplow 1500 models only note: do not use this model vehicle for snowplow applications. Warning! Snowplows and other aftermarket equipment should not be added to the front end of your vehicle. The airbag crash sensors may be affected by the change in the front end structure. The airbags could deplo...

  • Page 666

    Note: before installation of a snowplow it is highly recommended that the owner/installer obtain and follow the recommendations contained within the current body builders guide. See your authorized dealer, installer or snowplow manufacturer for this information. There are unique electrical systems t...

  • Page 667

    Snowplow prep package model availability for information about snowplow applications visit www.Ramtrucks.Com or refer to the current body build- ers guide. 1. The maximum number of occupants in the truck should not exceed two. 2. The total gvwr or the front gawr or the rear gawr should never be exce...

  • Page 668

    Completely and position it as low as road or surface conditions permit. Do not exceed 40 mph (64 km/h). The operator should always maintain a safe stopping distance and allow adequate passing clearance. Operating tips under ideal snow plowing conditions, 20 mph (32 km/h) should be maximum operating ...

  • Page 669

    Recreational towing (behind motorhome, etc.) towing this vehicle behind another vehicle towing condition wheels off the ground two-wheel drive models four-wheel drive models flat tow none not allowed see instructions • automatic transmission in park • manual transmission in gear (not in neutral) • t...

  • Page 670

    Note: • when recreationally towing your vehicle, always fol- low applicable state and provincial laws. Contact state and provincial highway safety offices for additional details. • vehicles equipped with air suspension must be placed in transport mode before tying them down (from the body) on a trai...

  • Page 671

    4. Properly secure the rear wheels to the dolly, following the dolly manufacturer’s instructions. 5. Turn the ignition switch to the off position and remove the key fob. 6. Install a suitable clamping device, designed for tow- ing, to secure the front wheels in the straight position. Caution! • towi...

  • Page 672

    Caution! (continued) • tow only in the forward direction. Towing this vehicle backwards can cause severe damage to the transfer case. • automatic transmissions must be placed in park for recreational towing. • manual transmissions must be placed in gear (not in neutral) for recreational towing. • be...

  • Page 673

    Warning! You or others could be injured or killed if you leave the vehicle unattended with the transfer case in the neutral (n) position without first fully engaging the parking brake. The transfer case neutral (n) position disengages both the front and rear drive- shafts from the powertrain and wil...

  • Page 674

    The light will stop blinking (stay on solid) when the shift to neutral (n) is complete. After the shift is completed and the neutral (n) light stays on, release the neutral (n) button. 5. Release the parking brake. 6. Shift the transmission into reverse. 7. Release the brake pedal (and clutch pedal ...

  • Page 675

    During the shift, the neutral (n) indicator light will flash continuously until all requirements are met or until the neutral (n) button is released. • the ignition switch must be in the on/run position for a shift to take place and for the position indicator lights to be operable. If the ignition s...

  • Page 676

    • with electronic shift transfer case with rotary selector switch, press and hold the transfer case neutral (n) button until the neutral (n) indicator light turns off. After the neutral (n) indicator light turns off, release the neutral (n) button. After the neutral (n) button has been released, the...

  • Page 677

    8. Start the engine. 9. Press and hold the brake pedal. 10. Release the parking brake. 11. Shift the transmission into gear, release the brake pedal (and clutch pedal on manual transmissions), and check that the vehicle operates normally. Note: with electronic shift transfer case: • steps 3 and 4 ar...

  • Page 679: Contents

    What to do in emergencies contents 䡵 hazard warning flashers . . . . . . . . . . .679 䡵 if your engine overheats . . . . . . . . . . . .679 䡵 wheel and tire torque specifications . . . . . . . . . . . . . . . . . . . . . .680 ▫ torque specifications . . . . . . . . . . . . . . . . . .680 䡵 jacking a...

  • Page 680

    䡵 manual park release — 8 speed transmission . . . . . . . . . . . . . . . . . . . . . . .735 䡵 towing a disabled vehicle . . . . . . . . . . .737 ▫ two-wheel drive models . . . . . . . . . . . . . . . .739 ▫ four-wheel drive models. . . . . . . . . . . . . . . .740 678 what to do in emergencies.

  • Page 681

    Hazard warning flashers the hazard warning flasher switch is located on the upper switch bank just below the radio. Push the switch to turn on the hazard warning flasher. When the switch is activated, all direc- tional turn signals will flash on and off to warn oncoming traffic of an emergency. Push...

  • Page 682

    Caution! Driving with a hot cooling system could damage your vehicle. If the temperature gauge reads hot (h), pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range. If the pointer remains on hot (h), and you hear conti...

  • Page 683

    **use only your authorized dealer recommended lug nuts/bolts and clean or remove any dirt or oil before tightening. Note: dual wheels are flat mounted, center piloted. The lug nuts are a two-piece assembly. When the tires are being rotated or replaced, clean these lug nuts and add two drops of oil a...

  • Page 684

    Tighten the lug nuts/bolts in a star pattern until each nut/bolt has been tightened twice. After 25 miles (40 km) check the lug nut/bolt torque to be sure that all the lug nuts/bolts are properly seated against the wheel. Warning! To avoid the risk of forcing the vehicle off the jack, do not tighten...

  • Page 685

    Jacking and tire changing jacking and tire changing 1500 series trucks warning! • do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel. • being under a jacked-up...

  • Page 686

    If your vehicle is not equipped with a touchscreen, this feature can be activated through the electronic vehicle information center (evic) or driver information display (did). Refer to “electronic vehicle information center (evic)” or “driver information display (did)” in “un- derstanding your instr...

  • Page 687

    Remove the jack and tools by turning the wing bolt counterclockwise, remove the wing bolt and then slide the assembly out from under the seat. Release the tool bag straps from the jack and remove tools from bag. Jack and tools (1500 series) jack and tool bag 6 what to do in emergencies 685.

  • Page 688

    There are 2 ways to assemble the tools: assembled for spare tire lowering/raising caution! • the wheel wrench can only be attached to exten- sion 3. • when attaching the tool to the winch mechanism be sure the large flared end opening on extension 1 is positioned correctly over the winch mechanism a...

  • Page 689

    Assembled for jack operation warning! After using the jack and tools, always reinstall them in the original carrier and location. While driving you may experience abrupt stopping, rapid accelera- tion or sharp turns. A loose jack, tools, bracket or other objects in the vehicle may move around with f...

  • Page 690

    Removing the spare tire 1. Remove the spare tire before attempting to jack up the truck. Attach the wheel wrench to the jack extension tube with the curved angle facing away from the vehicle. Insert the tube through the access hole be- tween the lower tailgate and the top of the bumper and into the ...

  • Page 691

    2. Rotate the wheel wrench handle counterclockwise until the spare tire is on the ground with enough cable slack to allow you to pull it out from under the vehicle. 3. Pull the spare tire out from under the vehicle to gain access to the spare tire retainer. Rotating the wheel wrench handle pulling t...

  • Page 692

    4. Lift the spare tire with one hand to give clearance to tilt the retainer at the end of the cable. 5. Pull the retainer through the center of the wheel. Note: the winch mechanism is designed for use with the jack extension tube only. Use of an air wrench or other power tools is not recommended and...

  • Page 693

    Preparations 1. Park the vehicle on a firm, level surface. Avoid ice or slippery areas. Warning! Do not attempt to change a tire on the side of the vehicle close to moving traffic, pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel. 2. Turn on...

  • Page 694

    Warning! (continued) • turn on the hazard warning flasher. • block the wheel diagonally opposite the wheel to be raised. • set the parking brake firmly and set an automatic transmission in park; a manual transmission in reverse. • never start or run the engine with the vehicle on a jack. • do not le...

  • Page 695

    Caution! Do not attempt to raise the vehicle by jacking on locations other than those indicated in the jacking instructions for this vehicle. 1. Remove the spare wheel, jack, and tools from storage. 2. Using the wheel wrench, loosen, but do not remove, the wheel nuts by turning them counterclockwise...

  • Page 696

    When changing a front wheel, place the scissor jack under the rear portion of the lower control arm as shown below. 4x4 series trucks front jacking location there is a jack location indicator on the rear portion of the lower control arm. 4x2 front jacking location 4x4 front jacking location indicato...

  • Page 697

    When changing a front wheel, place the scissor jack under the rear portion of the lower control arm as shown below. 4x2 and 4x4 rear jacking location operate the jack using the jack drive tube and the wheel wrench. The tube extension may be used but is not required. For 4x2 and 4x4 trucks, when chan...

  • Page 698

    Connect the jack tube extension and wheel wrench. Caution! Before raising the wheel off the ground, make sure that the jack will not damage surrounding truck parts and adjust the jack position as required. 4. By rotating the lug wrench clockwise, raise the vehicle until the wheel just clears the sur...

  • Page 699

    5. Remove the wheel nuts and pull the wheel off. Install the spare wheel and wheel nuts with the cone shaped end of the wheel nuts toward the wheel. To avoid the risk of forcing the vehicle off the jack, do not fully tighten the wheel nuts until the vehicle has been lowered. 6. Finish tightening the...

  • Page 700

    Note: do not oil wheel studs. For chrome wheels, do not substitute with chrome plated wheel nuts. To stow the flat or spare note: vehicles equipped with aluminum wheels can- not be stored under the vehicle because the wheel retainer will not fit through the wheel pilot hole. Secure the flat tire in ...

  • Page 701

    2. Lift the spare tire with one hand to give clearance to tilt the retainer at the end of the cable and position it properly across the wheel opening. 3. Attach the wheel wrench to the jack extension tube with the curved angle facing away from the vehicle. Insert the tube through the access hole bet...

  • Page 702

    4. Rotate the wheel wrench handle clockwise until the wheel is drawn into place against the underside of the vehicle. Continue to rotate until you feel the winch mechanism slip, or click three or four times. It cannot be overtightened. Push against the tire several times to ensure it is firmly in pl...

  • Page 703

    2. Position the jack and tool bag. Make sure the lug wrench is under the jack near the jack turn-screw. 3. Secure the tool bag straps to the jack. Jack and tool bag jack and tools tied 6 what to do in emergencies 701.

  • Page 704

    4. Place the jack and tools in the storage position holding the jack by the jack turn-screw, slip the jack and tools under the seat so that the bottom slot engages into the fastener on the floor. Note: ensure that the jack slides into the front hold down location. 5. Turn the wing bolt clockwise to ...

  • Page 705

    Warning! After using the jack and tools, always reinstall them in the original carrier and location. While driving you may experience abrupt stopping, rapid accelera- tion or sharp turns. A loose jack, tools, bracket or other objects in the vehicle may move around with force, resulting in serious in...

  • Page 706

    Jack location the jack and jack tools are stored under the front passenger seat. Removal of jack and tools (2500, 3500 series) to access the jack and jack tools you must remove the plastic access cover, located on the side of the front passengers seat. To remove the cover, pull the front part of the...

  • Page 707

    Remove the jack and tools by turning the wing bolt counterclockwise, remove the wing bolt and then slide the assembly out from under the seat. Remove the jack and tools from the bracket assembly. Turn the jack-turn-screw counterclockwise to release jack from bracket assembly. Wing bolt/jack and tool...

  • Page 708

    There are 2 ways to assemble the tools: assembled for spare tire lowering/raising caution! • the wheel wrench can only be attached to exten- sion 3. • when attaching the tool to the winch mechanism be sure the large flared end opening on extension 1 is positioned correctly over the winch mechanism a...

  • Page 709

    Assembled for jack operation warning! After using the jack and tools, always reinstall them in the original carrier and location. While driving you may experience abrupt stopping, rapid accelera- tion or sharp turns. A loose jack, tools, bracket or other objects in the vehicle may move around with f...

  • Page 710

    Removing the spare tire 1. Remove the spare tire before attempting to jack up the truck. Attach the wheel wrench to the jack extension tube with the curved angle facing away from the vehicle. Insert the tube through the access hole be- tween the lower tailgate and the top of the bumper and into the ...

  • Page 711

    2. Rotate the wheel wrench handle counterclockwise until the spare tire is on the ground with enough cable slack to allow you to pull it out from under the vehicle. 3. Pull the spare tire out from under the vehicle to gain access to the spare tire retainer. Rotating the wheel wrench handle pulling t...

  • Page 712

    4. Lift the spare tire with one hand to give clearance to tilt the retainer at the end of the cable. 5. Pull the retainer through the center of the wheel. Note: the winch mechanism is designed for use with the jack extension tube only. Use of an air wrench or other power tools is not recommended and...

  • Page 713

    Preparations 1. Park the vehicle on a firm, level surface. Avoid ice or slippery areas. Warning! Do not attempt to change a tire on the side of the vehicle close to moving traffic, pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel. 2. Turn on...

  • Page 714

    Warning! (continued) • turn on the hazard warning flasher. • block the wheel diagonally opposite the wheel to be raised. • set the parking brake firmly and set an automatic transmission in park; a manual transmission in reverse. • never start or run the engine with the vehicle on a jack. • do not le...

  • Page 715

    Caution! Do not attempt to raise the vehicle by jacking on locations other than those indicated in the jacking instructions for this vehicle. 1. Remove the spare wheel, jack, and tools from storage. 2. Using the lug wrench, loosen, but do not remove, the wheel nuts by turning them counterclockwise o...

  • Page 716

    Lug wrench adapter lug wrench adapter and wrench 714 what to do in emergencies.

  • Page 717

    3. Placement of the jack: front jacking location when changing the front wheel, assemble the jack drive tube to the jack and connect the drive tube to the extension tube. Place the jack under the axle as close to the tire as possible with the drive tubes extending to the front. Connect the jack tube...

  • Page 718

    Rear jacking location when changing a rear wheel, assemble the jack drive tube to the jack and connect the drive tube to the extension tube. Place the jack under the axle between the spring and the shock absorber with the drive tubes extending to the rear. Connect the jack tube extension and wheel w...

  • Page 719

    5. Remove the wheel nuts and pull the wheel off. On single rear-wheel (srw) trucks, install the spare wheel and wheel nuts with the cone shaped end of the wheel nuts toward the wheel. On 3500 dual rear-wheel models (drw) trucks, if the outer tire is being re- placed then leave the inner wheel on the...

  • Page 720

    6. Finish tightening the lug nuts. Push down on the wrench while at the end of the handle for increased leverage. Tighten the lug nuts in a star pattern until each nut has been tightened twice. For the correct lug nut torque refer to “torque specifications” in this section. If in doubt about the cor...

  • Page 721

    7. Install the wheel center cap and remove the wheel blocks. Do not install chrome or aluminum wheel center caps on the spare wheel. This may result in cap damage. 8. Lower the jack to its fully closed position. Stow the replaced tire, jack, and tools as previously described. Note: if the bottle jac...

  • Page 722

    1. Turn the wheel so that the valve stem is facing the ground and toward the rear of the vehicle for conve- nience in checking the spare tire inflation. Slide the wheel retainer through the center of the wheel. 2. Lift the spare tire with one hand to give clearance to tilt the retainer at the end of...

  • Page 723

    3. Attach the wheel wrench to the jack extension tube with the curved angle facing away from the vehicle. Insert the tube through the access hole between the lower tailgate and the top of the bumper and into the winch mechanism tube. 4. Rotate the wheel wrench handle clockwise until the wheel is dra...

  • Page 724

    Note: the winch mechanism is designed for use with the jack extension tube only. Use of an air wrench or other power tools is not recommended and can damage the winch. Reinstalling the jack and tools (2500 and 3500 series) 1. Tighten the jack all the way down by turning the jack turn-screw countercl...

  • Page 725

    3. Place the jack and tool bracket assembly in the storage position holding the jack by the jack turn-screw, slip the jack and tools under the seat so that the bottom slot engages into the fastener on the floor. Note: ensure that the jack and tool bracket assembly slides into the front hold down loc...

  • Page 726

    Hub caps/wheel covers — if equipped the hub caps must be removed before raising the vehicle off the ground. Caution! Use extreme caution when removing the front and rear center caps. Damage can occur to the center cap and/or the wheel if screwdriver type tools are used. A pulling motion, not a pry o...

  • Page 727

    You must use the flat end of the lug wrench to pull off the wheel skins. Locate the hub cap pull notches (2 notches on each cap). Insert the flat tip completely and using a back and forth motion, loosen the wheel skin. Repeat this procedure around the tire until the skin pops off. Replace the wheel ...

  • Page 728

    Caution! Do not use a portable battery booster pack or any other booster source with a system voltage greater than 12 volts or damage to the battery, starter motor, alternator or electrical system may occur. Warning! Do not attempt jump-starting if the battery is frozen. It could rupture or explode ...

  • Page 729

    Warning! • take care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is on. You can be injured by moving fan blades. • remove any metal jewelry such as rings, watch bands and bracelets that could make an inadvertent electrical contact. You co...

  • Page 730

    3. If using another vehicle to jump-start the battery, park the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is off. Warning! Do not allow vehicles to touch each other as this could establish a ground connection and personal injury could result. Jump-start...

  • Page 731

    4. Connect the opposite end of the negative (-) jumper cable to a good engine ground (exposed metal part of the discharged vehicle’s engine) away from the battery and the fuel injection system. Warning! Do not connect the jumper cable to the negative (-) post of the discharged battery. The resulting...

  • Page 732

    4. Disconnect the opposite end of the positive (+) jumper cable from the positive (+) post of the vehicle with the discharged battery. If frequent jump-starting is required to start your vehicle you should have the battery and charging system in- spected at your authorized dealer. Caution! Accessori...

  • Page 733

    Caution! Racing the engine or spinning the wheels may lead to transmission overheating and failure. Allow the en- gine to idle with the transmission in neutral for at least one minute after every five rocking-motion cycles. This will minimize overheating and reduce the risk of clutch or transmission...

  • Page 734

    Warning! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause damage, or even failure, of the axle and tires. A tire could explode and injure someone. Do not spin your vehi- cle’s wheels faster than 30 mph (48 km/h) or for longer than 30 seconds continuously w...

  • Page 735

    Shift lever override — 6-speed transmission if a malfunction occurs and the shift lever cannot be moved out of the park position, you can use one of the following procedures to temporarily move the shift lever: column shifter — if equipped 1. Turn the engine off. 2. Firmly apply the parking brake. 3...

  • Page 736

    Center console shifter — if equipped 1. Turn the engine off. 2. Firmly apply the parking brake. 3. Using a small screwdriver or similar tool, remove the shift lever override access cover (located to the right of the shift lever). 4. Push and maintain firm pressure on the brake pedal. 5. Insert the s...

  • Page 737

    Manual park release — 8 speed transmission warning! Always secure your vehicle by fully applying the parking brake, before activating the manual park release. Activating the manual park release will allow your vehicle to roll away if it is not secured by the parking brake or by proper connection to ...

  • Page 738

    Follow these steps to activate the manual park release: 1. Firmly apply the parking brake. 2. Using a small screwdriver or similar tool, remove the manual park release access cover, which is just above the parking brake release handle, below and to the left of the steering column. 3. Using the screw...

  • Page 739

    Towing a disabled vehicle this section describes procedures for towing a disabled vehicle using a commercial towing service. If the trans- mission and drivetrain are operable, disabled vehicles may also be towed as described under “recreational towing” in the “starting and operating” section. Note: ...

  • Page 740

    Towing condition wheels off the ground 2wd models 4wd models flat tow none if transmission is operable: • transmission in neutral • 30 mph (48 km/h) max speed • 15 miles (24 km) max distance (6–speed transmission) • 30 miles (48 km) max distance (8–speed transmission) see instructions in “recreation...

  • Page 741

    If you must use the accessories (wipers, defrosters, etc.) while being towed, the ignition must be in the on/run position, not the acc position. If the key fob is unavailable or the vehicle’s battery is discharged, refer to ”manual park release” or “shift lever override” in this section for instruct...

  • Page 742

    And the rear wheels on a towing dolly, or (when using a suitable steering wheel stabilizer to hold the front wheels in the straight position) with the rear wheels raised and the front wheels on the ground. Caution! Towing this vehicle in violation of the above require- ments can cause severe engine ...

  • Page 743: Maintaining Your Vehicle

    Maintaining your vehicle contents 䡵 engine compartment — 3.6l . . . . . . . . . .744 䡵 engine compartment — 5.7l . . . . . . . . . .745 䡵 engine compartment — 6.4l . . . . . . . . . .746 䡵 onboard diagnostic system (obd ii) . . .747 ▫ loose fuel filler cap message . . . . . . . . . . . .747 䡵 emissi...

  • Page 744

    ▫ adding washer fluid . . . . . . . . . . . . . . . . . .768 ▫ exhaust system . . . . . . . . . . . . . . . . . . . . . .768 ▫ cooling system . . . . . . . . . . . . . . . . . . . . . .771 ▫ brake system . . . . . . . . . . . . . . . . . . . . . . . .778 ▫ rear axle and 4x4 front driving axle fluid ...

  • Page 745

    䡵 fluids, lubricants, and genuine parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .817 ▫ engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . .817 ▫ chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . .820 7 maintaining your vehicle 743.

  • Page 746

    Engine compartment — 3.6l 1 — air cleaner filter 5 — battery 2 — engine oil dipstick 6 — washer fluid reservoir 3 — engine oil fill 7 — power distribution center (fuses) 4 — brake fluid reservoir 8 — engine coolant reservoir 744 maintaining your vehicle.

  • Page 747

    Engine compartment — 5.7l 1 — air cleaner filter 7 — washer fluid reservoir 2 — automatic transmission dipstick (6-speed trans only) 8 — power distribution center (fuses) 3 — engine oil fill 9 — power steering fluid reservoir (2500/3500 models only) 4 — engine oil dipstick 10 — coolant pressure cap ...

  • Page 748

    Engine compartment — 6.4l 1 — coolant pressure bottle 6 — battery 2 — transmission dipstick 7 — power distribution center (fuses) 3 — engine oil fill 8 — washer solvent 4 — engine oil dipstick 9 — power steering fluid reservoir 5 — brake fluid reservoir 10 — air cleaner filter 746 maintaining your v...

  • Page 749

    Onboard diagnostic system (obd ii) your vehicle is equipped with a sophisticated onboard diagnostic system called obd ii. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide ex...

  • Page 750

    Select button to turn off the message. If the problem continues, the message will appear the next time the vehicle is started. A loose, improperly installed, or damaged fuel filler cap may also turn on the malfunction indicator light (mil). Emissions inspection and maintenance programs in some local...

  • Page 751

    3. Approximately 15 seconds later, one of two things will happen: • the mil will flash for about 10 seconds and then return to being fully illuminated until you turn off the ignition or start the engine. This means that your vehicle’s obd ii system is not ready and you should not proceed to the i/m ...

  • Page 752

    Dealer service your authorized dealer has the qualified service person- nel, special tools, and equipment to perform all service operations in an expert manner. Service manuals are available which include detailed service information for your vehicle. Refer to these service manuals before attempting...

  • Page 753

    Caution! (continued) • your vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance inter- vals. Do not use chemical flushes in these compo- nents as the chemicals can damage your engine, transmission, power steering...

  • Page 754

    Change engine oil the oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Refer to the “maintenance schedule” for further informa- tion. Note: 1500 models only • under no circumstances should oil change intervals exceed 10,000 miles (16,000 ...

  • Page 755

    Caution! Do not use chemical flushes in your engine oil as the chemicals can damage your engine. Such damage is not covered by the new vehicle limited warranty. Engine oil viscosity — 3.6l engines (1500 models only) mopar® sae 5w-20 engine oil approved to fca us material standard ms-6395 or equivale...

  • Page 756

    • for 2500/3500 trucks with a 5.7l engine operating under a gross combined weight rating of 14,000 lbs (6 350 kg) or greater, sae 5w-30 engine oil is recom- mended for all operating temperatures. Engine oil viscosity — 6.4l engine use pennzoil ultra 0w–40 engine or equivalent mopar oil meeting the f...

  • Page 757

    Quality filters should be used to assure most efficient service. Mopar® engine oil filters are a high quality oil filter and are recommended. Engine air cleaner filter refer to the “maintenance schedule” for the proper maintenance intervals. Warning! The air induction system (air cleaner, hoses, etc...

  • Page 758

    Engine air cleaner filter removal 1. Release the spring clips from the air cleaner cover. 3.6l/5.7l air cleaner filter cover 1 — clean air hose clamp 2 — air hose 3 — spring clips 6.4l air cleaner filter cover 1 — clean air hose clamp 2 — spring clips 756 maintaining your vehicle.

  • Page 759

    2. Lift the air cleaner cover to access the air cleaner filter. 3. Remove the air cleaner filter element from the housing assembly. Open air cleaner filter assembly 1 — air cleaner cover 2 — air cleaner filter air cleaner filter 1 — air cleaner filter 2 — air cleaner filter inspection surface 7 main...

  • Page 760

    Engine air cleaner filter installation note: inspect and clean the housing if dirt or debris is present before replacing the air filter element. 1. Install the air cleaner filter element into the housing assembly with the air cleaner filter inspection surface facing downward. 2. Install the air clea...

  • Page 761

    When inspecting accessory drive belts, small cracks that run across ribbed surface of belt from rib to rib, are considered normal. These are not a reason to replace belt. However, cracks running along a rib (not across) are not normal. Any belt with cracks running along a rib must be replaced. Also ...

  • Page 762

    Conditions that would require replacement: • rib chunking (one or more ribs has separated from belt body) • rib or belt wear • longitudinal belt cracking (cracks between two ribs) • belt slips • “groove jumping⬙ (belt does not maintain correct position on pulley) • belt broken (note: identify and co...

  • Page 763

    Warning! (continued) • battery gas is flammable and explosive. Keep flame or sparks away from the battery. Do not use a booster battery or any other booster source with an output greater than 12 volts. Do not allow cable clamps to touch each other. • battery posts, terminals, and related accessories...

  • Page 764

    Warning! • use only refrigerants and compressor lubricants approved by the manufacturer for your air condi- tioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs. Re...

  • Page 765

    Refrigerant recovery and recycling hfo 1234yf — if equipped hfo 1234yf air conditioning refrigerant is a hydro- fluorocarbon (hfc) that is endorsed by the environmen- tal protection agency and is an ozone-saving product with a low gwp (global warming potential). However, the manufacturer recommends ...

  • Page 766

    Windshield wiper blades clean the rubber edges of the wiper blades and the windshield periodically with a sponge or soft cloth and a mild nonabrasive cleaner. This will remove accumula- tions of salt or road film. Operation of the wipers on dry glass for long periods may cause deterioration of the w...

  • Page 767

    Wiper blade removal/installation caution! Do not allow the wiper arm to spring back against the glass without the wiper blade in place or the glass may be damaged. 1. Lift the wiper arm to raise the wiper blade off of the glass, until the wiper arm is in the full up position. Wiper blade with releas...

  • Page 768

    2. To disengage the wiper blade from the wiper arm, press the release tab on the wiper blade and while holding the wiper arm with one hand, slide the wiper blade down towards the base of the wiper arm. Wiper blade with release tab in unlocked position 1 — wiper blade 2 — wiper arm 3 — release tab 76...

  • Page 769

    3. With the wiper blade disengaged, remove the wiper blade from the wiper arm. 4. Gently lower the wiper arm onto the glass. Installing the front wipers 1. Lift the wiper arm off of the glass, until the wiper arm is in the full up position. 2. Position the wiper blade near the hook on the tip of the...

  • Page 770

    Adding washer fluid the fluid reservoir is located under the hood and should be checked for fluid level at regular intervals. Fill the reservoir with windshield washer solvent only (not ra- diator antifreeze). When refilling the washer fluid reser- voir, take some washer fluid and apply it to a clot...

  • Page 771

    If you notice a change in the sound of the exhaust system; or if the exhaust fumes can be detected inside the vehicle; or when the underside or rear of the vehicle is damaged; have an authorized technician inspect the complete ex- haust system and adjacent body areas for broken, dam- aged, deteriora...

  • Page 772

    Caution! (continued) • damage to the catalytic converter can result if your vehicle is not kept in proper operating condition. In the event of engine malfunction, particularly involving engine misfire or other apparent loss of performance, have your vehicle serviced promptly. Continued operation of ...

  • Page 773

    Cooling system warning! You or others can be badly burned by hot engine coolant (antifreeze) or steam from your radiator. If you see or hear steam coming from under the hood, do not open the hood until the radiator has had time to cool. Never try to open a cooling system pressure cap when the radiat...

  • Page 774

    Cooling system — drain flush and refill if the engine coolant (antifreeze) is dirty or contains a considerable amount of sediment, clean and flush with a reliable cooling system cleaner. Follow with a thorough rinsing to remove all deposits and chemicals. Properly dispose of old engine coolant (anti...

  • Page 775

    Caution! (continued) • do not use water alone or alcohol-based engine coolant (antifreeze) products. Do not use additional rust inhibitors or antirust products, as they may not be compatible with the radiator engine coolant and may plug the radiator. • this vehicle has not been designed for use with...

  • Page 776

    • use only high purity water such as distilled or deion- ized water when mixing the water/engine coolant (antifreeze) solution. The use of lower quality water will reduce the amount of corrosion protection in the engine cooling system. Please note that it is the owner’s responsibility to main- tain ...

  • Page 777

    Warning! • do not open hot engine cooling system. Never add engine coolant (antifreeze) when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pressure to build up in the cooling system. To prevent scalding or injury, do not remove the pressure cap w...

  • Page 778

    To check the coolant level: 1. Open the coolant reservoir. 2. Lift and remove the plastic dipstick from the reservoir neck. 3. Check the coolant level on the dipstick. Opening the coolant reservoir coolant reservoir dipstick 776 maintaining your vehicle.

  • Page 779

    The radiator normally remains completely full, so there is no need to remove the radiator cap unless checking for engine coolant (antifreeze) freeze point or replacing en- gine coolant (antifreeze). Advise your service attendant of this. As long as the engine operating temperature is satisfactory, t...

  • Page 780

    • check the coolant freeze point in the radiator and in the coolant expansion bottle. If engine coolant (anti- freeze) needs to be added, the contents of the coolant expansion bottle must also be protected against freez- ing. • if frequent engine coolant (antifreeze) additions are required, the cool...

  • Page 781

    Warning! Riding the brakes can lead to brake failure and possibly a collision. Driving with your foot resting or riding on the brake pedal can result in abnormally high brake temperatures, excessive lining wear, and possible brake damage. You would not have your full braking capacity in an emergency...

  • Page 782

    Warning! (continued) • to avoid contamination from foreign matter or moisture, use only new brake fluid or fluid that has been in a tightly closed container. Keep the master cylinder reservoir cap secured at all times. Brake fluid in a open container absorbs moisture from the air resulting in a lowe...

  • Page 783

    For 1500 model axles, the fluid level should be even with the bottom of the fill hole (within 1/4 in (6.4 mm) of edge of hole) for the fdu215 hd front axle and c235fe rear axle. For all 2500/3500 model axles, the fluid level should be 1/4 in ± 1/4 in (6.4 mm ± 6.4 mm) below the fill hole on the 9.25...

  • Page 784

    Note: when refilling an axle with a limited slip differ- ential, (which requires a limited slip additive), the limited slip additive should be added before the gear lubricant is added to insure proper additive fill. Transfer case drain and refill refer to the “maintenance schedule” for the proper ma...

  • Page 785

    Caution! Using a transmission fluid other than the manufactur- er’s recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder, and will require more frequent fluid and filter changes. Refer to “fluids, lubricants, and genu- ine parts” in this section for...

  • Page 786

    Caution! If a transmission fluid leak occurs, visit your autho- rized dealer immediately. Severe transmission dam- age may occur. Your authorized dealer has the proper tools to adjust the fluid level accurately. Fluid level check — six-speed transmission it is best to check the fluid level when the ...

  • Page 787

    6. Remove the dipstick, wipe it clean and reinsert it until seated. 7. Remove the dipstick again and note the fluid level on both sides. The fluid level reading is only valid if there is a solid coating of oil on both sides of the dipstick. Note that the holes in the dipstick will be full of fluid i...

  • Page 788

    Note: to prevent dirt and water from entering the transmission after checking or replenishing fluid, make sure that the dipstick cap is properly reseated. It is normal for the dipstick cap to spring back slightly from its fully seated position, as long as its seal remains engaged in the dipstick tub...

  • Page 789

    The following maintenance recommendations will enable you to obtain maximum benefit from the corrosion resistance built into your vehicle. What causes corrosion? Corrosion is the result of deterioration or removal of paint and protective coatings from your vehicle. The most common causes are: • road...

  • Page 790

    Caution! • do not use abrasive or strong cleaning materials such as steel wool or scouring powder that will scratch metal and painted surfaces. • use of power washers exceeding 1,200 psi (8 274 kpa) can result in damage or removal of paint and decals. Special care • if you drive on salted or dusty r...

  • Page 791

    Wheel and wheel trim care • all wheels and wheel trim, especially aluminum and chrome plated wheels, should be cleaned regularly with a mild soap and water to prevent corrosion. • to remove heavy soil and/or excessive brake dust, use mopar® wheel cleaner. Note: if your vehicle is equipped with dark ...

  • Page 792

    • for tough stains, apply mopar® total clean, or a mild soap solution to a clean, damp cloth and remove stain. Use a fresh, damp towel to remove soap residue. • for grease stains, apply mopar® multi-purpose cleaner to a clean, damp cloth and remove stain. Use a fresh, damp towel to remove soap resid...

  • Page 793

    Caution! Do not use alcohol and alcohol-based and/or keton based cleaning products to clean leather seats, as damage to the seat may result. Cleaning headlights your vehicle is equipped with plastic headlights and fog lights that are lighter and less susceptible to stone break- age than glass headli...

  • Page 794

    1. Clean with a wet soft rag. A mild soap solution may be used, but do not use high alcohol content or abrasive cleaners. If soap is used, wipe clean with a clean damp rag. 2. Dry with a soft cloth. Seat belt maintenance do not bleach, dye or clean the belts with chemical solvents or abrasive cleane...

  • Page 795

    Spray-on bedliner – if equipped during ownership, the shine and luster of the spray-on bedliner can fade from oxidation, road dirt, heavy-duty hauling and hard water stains. Weathering and uv exposure will lead to fading, dulling, and loss of gloss over time. To help maintain the appearance of your ...

  • Page 796

    Repairing the spray-on bedliner while extremely tough, it is possible to damage a spray-on bedliner. One common condition is when loading a heavy pallet and dragging that pallet across the floor of the bed. If a nail or sharp point is exposed under the weight of the pallet a scratch or tear is possi...

  • Page 797

    Power distribution center the power distribution center is located in the engine compartment near the battery. This center contains car- tridge fuses, micro fuses, relays, and circuit breakers. A description of each fuse and component may be stamped on the inside cover, otherwise the cavity number o...

  • Page 798

    Cavity cartridge fuse micro fuse description f07 40 amp green starter solenoid f08 20 amp blue (1500 ld/ cummins diesel) emissions diesel – if equipped f09 40 amp green (special services vehicle & cum- mins diesel) 30 amp pink (1500 ld diesel) diesel fuel heater – if equipped f10 40 amp green body c...

  • Page 799

    Cavity cartridge fuse micro fuse description f13 40 amp green blower motor f14 40 amp green body controller #4 / power locks f16 30 amp pink smart bar – if equipped f19 20 amp blue (1500 ld diesel) 30 amp pink (cummins diesel) scr – if equipped f20 30 amp pink passenger door module f21 30 amp pink d...

  • Page 800

    Cavity cartridge fuse micro fuse description f25 30 amp pink front wiper f26 30 amp pink antilock brakes/stability control module/valves f28 20 amp blue trailer tow backup lights – if equipped f29 20 amp blue trailer tow parking lights – if equipped f30 30 amp pink trailer tow receptacle f31 30 amp ...

  • Page 801

    Cavity cartridge fuse micro fuse description f41 10 amp red active grill shutter — if equipped f42 20 amp yellow horn f44 10 amp red diagnostic port f46 10 amp red tire pressure monitor f49 10 amp red instrument panel cluster f50 20 amp yellow air suspension control module – if equipped f51 10 amp r...

  • Page 802

    Cavity cartridge fuse micro fuse description f61 10 amp red (1500 ld diesel & cummins diesel) pm sensor – if equipped f62 10 amp red air conditioning clutch f63 20 amp yellow ignition coils (gas), urea heater (cummins diesel) f64 25 amp clear fuel injectors / powertrain f65 10 amp red usb interface ...

  • Page 803

    Cavity cartridge fuse micro fuse description f74 20 amp yellow (gas engine & 1500 ld diesel) 10 amp red (cum- mins diesel engine) brake vacuum pump gas/diesel – if equipped f75 10 amp red coolant temperature valve actuator f76 10 amp red antilock brakes/electronic stability control f77 10 amp red dr...

  • Page 804

    Cavity cartridge fuse micro fuse description f85 10 amp red airbag module f86 10 amp red airbag module f87 10 amp red air suspension-if equipped / trailer tow / steering column control module f88 15 amp blue instrument panel cluster f90/f91 20 amp yellow power outlet (rear seats) customer selectable...

  • Page 805

    Cavity cartridge fuse micro fuse description f101 15 amp blue electrochromatic mirror / smart high beams – if equipped f104 20 amp yellow power outlets (instrument panel/center console) caution! • when installing the power distribution center cover, it is important to ensure the cover is properly po...

  • Page 806

    Replacement bulbs all of the inside bulbs are brass or glass-wedge base. Aluminum base bulbs are not approved. Interior bulbs bulb number overhead console lamps ts 212–9 dome lamp 7679 for lighted switches, see your authorized dealer for replacement instructions. Exterior bulbs bulb number base quad...

  • Page 807

    Bulb number shape) fog lamp (vertical shape) 9006 center high mounted stop lamp (chmsl) 921k rear cargo lamp 921 led center high mounted stop lamp (chmsl)/cargo lamp led (serviced at autho- rized dealer) cab roof marker lamps 194na base rear tail/turn and stop lamp 3157k premium rear tail/turn and s...

  • Page 808

    Base quad / premium bi-halogen: low beam headlamp, high beam headlamp, front park and turn — if equipped 1. Open the hood. 2. Disconnect and isolate the negative battery cable. 3. Remove the six plastic push-in fasteners that secure the upper radiator seal to the grille support and both fender ledge...

  • Page 809

    8. Reach through the access hole of the wheel house splash shield and lift the slide lock upward far enough to disengage it from the lock post on the back of the front lamp unit housing. 9. Remove the headlamp assembly. Grasp the outboard edge of the lamp and pull it straight forward to disengage th...

  • Page 810

    Note: there are access covers over both headlamp bulb access holes in the quad front lamp unit housing (if equipped). These covers must be reinstalled after the bulb has been replaced. Fog lamps — if equipped 1. Reach under and behind the front bumper to access the back of the front fog lamp housing...

  • Page 811

    2. Pull the outboard side of the lamp rearward far enough to unsnap the two receptacles on the outboard side of the lamp housing from the two plastic snap post retainers in the outer box side panel. 3. Disconnect the wiring harness connectors from the bulb socket. 4. Rotate the bulb socket countercl...

  • Page 812

    Center high-mounted stoplamp (chmsl) with cargo lamp 1. Remove the two screws holding the housing/lens to the body as shown. 2. Separate the connector holding the housing and wir- ing harness to the body. 3. Turn the desired bulb socket ¼ turn and remove the socket and bulb from housing. 4. Pull the...

  • Page 813

    Caution! Do not contaminate the bulb glass by touching it with your fingers or by allowing it to contact other oily surfaces. Shortened bulb life will result. • outside bulbs: cargo lamps • inside bulb: center high-mounted stop lamp 5. Reverse the procedure for installation of bulbs and housing. Cab...

  • Page 814

    2. Rotate the bulb socket ¼ turn and pull it from the lamp assembly. 3. Pull the bulb straight from it’s socket and replace. Removing bulb socket from clearance lamp removing the bulb from the bulb socket 812 maintaining your vehicle.

  • Page 815

    Rear lamp bar id marker (dual rear wheels) — if equipped 1. Loosen the two screws and the housing to gain access to the bulb sockets. 2. Turn the socket ¼ turn counterclockwise to access the bulb. 3. Pull the bulb straight out from the socket. 4. Reverse the procedure for installation of the bulbs a...

  • Page 816

    Side marker lamps (dual rear wheels) — if equipped 1. Push rearward on the side marker lamp assembly. 2. Pull the entire assembly from the fender. 3. Turn the socket ¼ turn counterclockwise and remove from assembly to access the bulb. 4. Pull the bulb straight out from socket. 5. Reverse the procedu...

  • Page 817

    Fluid capacities u.S. Metric fuel (approximate) 1500 regular cab shortbed/crew quad cab models 26 gallons 98 liters 1500 regular cab longbed/crew quad cab models (optional) 32 gallons 121 liters 2500/3500 shortbed models 31 gallons 117 liters 2500/3500 longbed models 32 gallons 121 liters engine oil...

  • Page 818

    U.S. Metric cooling system 3.6l engine (we recommend you use mopar® antifreeze/ coolant 10 year/150,000 mile formula that meets the require- ments of fca material standard ms.90032.) 13.7 quarts 13 liters 5.7l engine – 1500 models (we recommend you use mopar® antifreeze/coolant 10 year/150,000 mile ...

  • Page 819

    Fluids, lubricants, and genuine parts engine component fluid, lubricant, or genuine part engine coolant we recommend you use mopar® antifreeze/coolant 10 year/150,000 mile formula oat (organic additive technology). Engine oil – 3.6l engine we recommend you use api certified sae 5w-20 engine oil, mee...

  • Page 820

    Component fluid, lubricant, or genuine part engine oil – 5.7l engine 2500/3500 trucks operating under a gross com- bined weight rating greater than 14,000 lbs/(6,350 kg.) we recommend you use api certified sae 5w-30 engine oil, meeting the requirements of fca us material standard ms-6395 such as mop...

  • Page 821

    Caution! • mixing of engine coolant (antifreeze) other than specified organic additive technology (oat) en- gine coolant (antifreeze), may result in engine damage and may decrease corrosion protection. Organic additive technology (oat) engine cool- ant is different and should not be mixed with hybri...

  • Page 822

    Chassis component fluid, lubricant, or genuine part automatic transmission – eight-speed automatic use only mopar® zf 8&9 speed atf™ automatic transmission fluid, or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. Automatic transmission – six...

  • Page 823

    Component fluid, lubricant, or genuine part rear axle – 1500 models we recommend you use mopar® synthetic gear lu- bricant sae 75w-140 (ms-8985). Limited-slip rear ax- les require the addition of 5 oz. (148 ml) mopar® limited slip additive (ms-10111). Front and rear axle – 2500/3500 models we recomm...

  • Page 825: Maintenance Schedules

    Maintenance schedules contents 䡵 maintenance schedule . . . . . . . . . . . . .824 ▫ maintenance chart . . . . . . . . . . . . . . . . . . . .826 8.

  • Page 826

    Maintenance schedule your vehicle is equipped with an automatic oil change indicator system. The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Based on engine operation conditions, the oil change indicator message will illuminate. This...

  • Page 827

    Once a month or before a long trip: • check engine oil level • check windshield washer fluid level • check tire pressure and look for unusual wear or damage. Rotate tires at the first sign of irregular wear, even if it occurs before the oil indicator system turns on. • check the fluid levels of the ...

  • Page 828

    Maintenance chart mileage or time passed (whichever comes first) 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 1 10,000 120,000 130,000 140,000 150,000 or years: 2 3 4 5 6 7 8 9 10 11 12 13 14 15 or kilometers: 32,000 48,000 64,000 80,000 96,000 1 12,000 128,000 144,000 160,000 176...

  • Page 829

    Mileage or time passed (whichever comes first) 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 1 10,000 120,000 130,000 140,000 150,000 or years: 2 3 4 5 6 7 8 9 10 11 12 13 14 15 or kilometers: 32,000 48,000 64,000 80,000 96,000 1 12,000 128,000 144,000 160,000 176,000 192,000 208,0...

  • Page 830

    Mileage or time passed (whichever comes first) 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 1 10,000 120,000 130,000 140,000 150,000 or years: 2 3 4 5 6 7 8 9 10 11 12 13 14 15 or kilometers: 32,000 48,000 64,000 80,000 96,000 1 12,000 128,000 144,000 160,000 176,000 192,000 208,0...

  • Page 831

    Mileage or time passed (whichever comes first) 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 1 10,000 120,000 130,000 140,000 150,000 or years: 2 3 4 5 6 7 8 9 10 11 12 13 14 15 or kilometers: 32,000 48,000 64,000 80,000 96,000 1 12,000 128,000 144,000 160,000 176,000 192,000 208,0...

  • Page 833: Contents

    If you need consumer assistance contents 䡵 suggestions for obtaining service for your vehicle . . . . . . . . . . . . . . . . . . . . . . .833 ▫ prepare for the appointment. . . . . . . . . . . . .833 ▫ prepare a list . . . . . . . . . . . . . . . . . . . . . . . .833 ▫ be reasonable with requests ....

  • Page 834

    䡵 department of transportation uniform tire quality grades . . . . . . . . . . . . . . . . .839 ▫ treadwear. . . . . . . . . . . . . . . . . . . . . . . . . . .839 ▫ traction grades . . . . . . . . . . . . . . . . . . . . . . .839 ▫ temperature grades. . . . . . . . . . . . . . . . . . . .840 832 if...

  • Page 835

    Suggestions for obtaining service for your vehicle prepare for the appointment if you are having warranty work done, be sure to have the right papers with you. Take your warranty folder. All work to be performed may not be covered by the warranty. Discuss additional charges with the service manager....

  • Page 836

    Facilities, factory-trained technicians, special tools, and the latest information to ensure the vehicle is fixed correctly and in a timely manner. This is why you should always talk to an authorized dealer service manager first. Most matters can be re- solved with this process. • if for some reason...

  • Page 837

    Customer assistance for the hearing or speech impaired (tdd/tty) to assist customers who have hearing difficulties, the manufacturer has installed special tdd (telecommuni- cation devices for the deaf) equipment at its customer center. Any hearing or speech impaired customer, who has access to a tdd...

  • Page 838

    We appreciate that you have made a major investment when you purchased the vehicle. An authorized dealer has also made a major investment in facilities, tools, and training to assure that you are absolutely delighted with the ownership experience. You will be pleased with their sincere efforts to re...

  • Page 839

    If nhtsa receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, nhtsa cannot become involved in individual problems between you, your authorized dealer, and the manufacturer. T...

  • Page 840

    Service manuals these comprehensive service manuals provide the infor- mation that students and professional technicians need in diagnosing/troubleshooting, problem solving, maintain- ing, servicing, and repairing fca us llc vehicles. A complete working knowledge of the vehicle, system, and/or compo...

  • Page 841

    Department of transportation uniform tire quality grades the following tire grading categories were established by the national highway traffic safety administration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your vehicle....

  • Page 842

    Temperature grades the temperature grades are a (the highest), b, and c, representing the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the mater...

  • Page 843: Index

    Index 10

  • Page 844

    Adding engine coolant (antifreeze) . . . . . . . . . . . .773 adding fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .636 adjustable pedals . . . . . . . . . . . . . . . . . . . . . . . . .183 air bag. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67, 68 air bag advance fro...

  • Page 845

    Auto down power windows . . . . . . . . . . . . . . . . . .47 automatic door locks . . . . . . . . . . . . . . . . . . . . . .39 automatic headlights . . . . . . . . . . . . . . . . . . . . . .166 automatic high beams . . . . . . . . . . . . . . . . . . . . .168 automatic temperature control (atc) ....

  • Page 846

    Camera, rear . . . . . . . . . . . . . . . . . . . . . . . . . . . .207 camper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .264 capacities, fluid . . . . . . . . . . . . . . . . . . . . . . . . . .815 caps, filler oil (engine) . . . . . . . . . . . . . . . . . . . . . . . .753, 754...

  • Page 847

    Automatic . . . . . . . . . . . . . . . . . . . . . . . . . . . .405 cold weather operation . . . . . . . . . . . . . . . . . . . .445 compact disc (cd) maintenance . . . . . . . . . . . . . .392 compact spare tire . . . . . . . . . . . . . . . . . . . . . . . .608 console, overhead . . . . . . . . ...

  • Page 848

    Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 remote keyless entry (rke) . . . . . . . . . . . . . . . .37 door locks, automatic . . . . . . . . . . . . . . . . . . . . . .39 door opener, garage. . . . . . . . . . . . . . . . . . . . . . .211 driving off-pavement . . . . . ....

  • Page 849

    Break-in recommendations . . . . . . . . . . . . . . . .113 compartment . . . . . . . . . . . . . . . . . . . . . . . . . .744 compartment identification . . . . . . . . .744, 745, 746 coolant (antifreeze) . . . . . . . . . . . . . . . . . . . . .817 exhaust gas caution . . . . . . . . . . . . . . ....

  • Page 850

    Flooded engine starting . . . . . . . . . . . . . . . . . . . .445 fluid, brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . .820 fluid capacities . . . . . . . . . . . . . . . . . . . . . . . . . .815 fluid leaks . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118 fluid level ch...

  • Page 851

    Glass cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . .791 grocery bag retainer. . . . . . . . . . . . . . . . . . . . . . .242 gross axle weight rating . . . . . . . . . . . . . . . . . . .642 gross vehicle weight rating. . . . . . . . . . . . . . . . . .641 guide, body builders . . . ...

  • Page 852

    Information center, vehicle . . . . . . . . . . . . . . .297, 325 inside rearview mirror . . . . . . . . . . . . . . . . . .126, 133 instrument cluster . . . . . . . . . . . . . . . . . . . . . . . .285 instrument panel and controls . . . . . . . . . . . . . . . .282 instrument panel lens cleaning ....

  • Page 853

    Airbag . . . . . . . . . . . . . . . . . . . . . . . . .78, 116, 285 alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .285 anti-lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . .285 anti-lock warning . . . . . . . . . . . . . . . . . . . . . .577 automatic headlights . ....

  • Page 854

    Limited-slip differential . . . . . . . . . . . . . . . . .545, 781 loading vehicle . . . . . . . . . . . . . . . . . . . . . . . . . .639 tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .597 locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 automatic do...

  • Page 855

    Occupant restraints . . . . . . . . . . . . . . . . . . . . . . . .49 octane rating, gasoline (fuel) . . . . . . . . . . . . . . . .627 off-pavement driving (off-road). . . . . . . . . . .526, 549 off-road driving (off-pavement). . . . . . . . . . .526, 549 oil, engine . . . . . . . . . . . . . . . ...

  • Page 856

    Power distribution center (fuses) . . . . . . . . . . . . . . . .795 door locks . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138 outlet (auxiliary electrical outlet) . . . . . . . .224, 230 seats . . . . . . . . . . . . ...

  • Page 857

    Remote control starting system . . . . . . . . . . . . . . . . . . . . . . . . .34 remote keyless entry (rke). . . . . . . . . . . . . . . .25, 26 fcc general information . . . . . . . . . . . . . . . . . .33 programming additional key fobs . . . . . . . . . . .21 programming additional transmitters...

  • Page 858

    Seat belt maintenance . . . . . . . . . . . . . . . . . . . . . .792 seat belt reminder . . . . . . . . . . . . . . . . . . . . . . . . .52 seat belts. . . . . . . . . . . . . . . . . . . . . . . . . . . . .51, 115 child restraint . . . . . . . . . . . . . . . . . . . . . . . . . .82 extender . . . ...

  • Page 859

    Transfer case, shifting out of transfer case neutral (n) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .673 shift lever override . . . . . . . . . . . . . . . . . . . . . . .733 shoulder belts . . . . . . . . . . . . . . . . . . . . . . . . . . . .53 signals, turn . . . . . . . . ....

  • Page 860

    Tachometer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .285 tailgate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .265 temperature control, automatic (atc) . . . . . . . . . .413 tilt steering column . . . . . . . . . . . . . . . . . . . . . . .180 tip start. . . . . . ...

  • Page 861

    Recreational . . . . . . . . . . . . . . . . . . . . . . . . . . .667 weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .649 towing vehicle behind a motorhome . . . . . . . . . . .667 traction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .546 traction control . . . ...

  • Page 862

    Uconnect® voice command. . . . . . . . . . . . . . . . . .417 uniform tire quality grades . . . . . . . . . . . . . . . . .839 universal garage door opener (homelink®) programming homelink® . . . . . . .212, 213, 215, 217 unleaded gasoline . . . . . . . . . . . . . . . . . . . . . . . .627 untwistin...

  • Page 863

    Windshield washers. . . . . . . . . . . . . . . . .177, 178, 768 fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . .177, 768 windshield wiper blades . . . . . . . . . . . . . . . . . . . .764 windshield wipers . . . . . . . . . . . . . . . . . . . . . . . .177 wiper blade replacement . ....

  • Page 864

    Installation of radio transmitting equipment special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained person- nel. The following must be obs...

  • Page 865

    1 5 0 0 / 2 5 0 0 / 3 5 0 0 o w n e r ’ s m a n u a l 2 0 1 5 2015 ram truck 1500/2500/3500 15d241-126-ad fourth edition printed in u.S.A. R a m t r u c k fca us llc.