Ramblewood Green EC2-30 User Manual - Operation Guide
OPERATION GUIDE
First Time Use
Any film or stickers on the glass surface should be removed before use.
You should switch on one cooking zone at a time, for 5 minutes at maximum
level. This will help to remove any odor and evaporate any humidity formed
inside the unit after exit factory.
Operation
All operations are performed by means of the 2 control knobs.
Control knob can be turned clockwise to select heating level. Numbers on
the dial indicate the power level from 1 to 9, with 9 is the maximum.
Marking below each knob indicates the zone it controls.
The 2 burners deliver maximum power of 1800W & 1200W each.
The areas where the heat radiate are marked by 2 circles on ceramic glass
surface. Saucepans must be positioned exactly on top of these zones for
efficient heating.
Cleaning and maintenance
Glass surface should be cleaned regularly.
IMPORTANT: Turn off power & let glass surface cool down before
cleaning.
Using the Scraper
The scraper should be placed against glass surface at an angle.
Residues can be removed by sliding the blade gently.
4