Ramblewood Green EC2-30 User Manual - page 8
Replacing the mains supply cable
If the power cord is damaged, it must be replaced by manufacturer or qualified
technician, per national & local safety regulation/guideline.
The main terminal block is located on the underside of the hob and terminals
are accessible by removing the terminal block cover screw.
The cable connections must be in accordance with the diagram located on the
bottom of the hob.
The “green-yellow” earth wire must be connected to the Earth marked . It must
be about 10 mm longer than the live and neutral wires.
The “blue” neutral wire must be connected to the terminal marked with letter
(N) - the live wire must be connected to the terminal marked with letter (L).
Please insure cable is not kinked or trapped when the hob is in position.
DO NOT ATTEMPT TO REPAIR THE UNIT BY YOURSELF
8