Ravelli Pompeii Owners & Installation Manual - Introduction
3
1.
Introduction
This manual is designed for both the technician and the home owner.
Please read this entire manual before installing or operating your
Freestanding
Pompeii
Ravelli
Wood Pellet Burning Stove. Failure to follow these instructions may result in property damage, bodily
injury or even death. Any unauthorized
of the appliance, or use of replacement parts not
recommended by the manufacturer is prohibited. All national and local regulations shall be complied
with when installing this appliance. Your local Pellet
Solutions
Fire
dealer will be happy to assist
you in obtaining information with regards to your local building codes and installation restrictions.
1.1
1.1.1 Rating label Location
Ravelli
Freestanding:
Note:
unit.
the
of
back
the
on
located
is
label
rating
he
T
*
Consumption will vary with the type of fuel used.
IMPORTANT: The above values were found during testing and may vary with the fuel type, climate and
installation style.
Pompeii
Testing Standard
Description
Class I IP-20
AS/NZS 5078:2007
Appliance: AS/NZS 4866:2007
Residential Wood Pellet Stove
Voltage 220- 240 Volt
Current: 2.92 – 3.18 Amps
Frequency: 50Hz
Max Power Requirement
550 watts
Unit with full hopper: 213kg
Hopper Capacity: 2
3kg
Mean Flue Gas Temp –
High: 56
1
degrees
Mean Flue Gas Temp-
Medium: 17
1
degrees
Mean Flue Gas Temp-
Low: 78 degrees
Fuel Consumption –
High: 4.0
kg per hour
Fuel Consumption –
Medium: 2.5kg per hour
Fuel Consumption –
Low: 1.0kg per hour
Heat/Power Output –
High: 17.2kw
Heat/Power Output –
Medium: 10.3kw
Heat/Power Output –
Low: 3.4
kw
Average Particular Emissions (dry weight)
23 gms per kg
0.
Average Emissions
14
Rate
mg/MJ
Average Efficiency
84%
Gross
Value of pellets (dry weight)
1
20. MJ/kg
Fuel Type:
Wood pellets – 6mm dia, - complying
with draft standard AS/NZS 4014.6
2008